Canon IXUS 265 HS User Manual

							111
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Setting Menu
Customize or adjust basic camera functions for greater convenience
Adjusting Basic Camera Functions ..............11 2Silencing Camera Operations ............................. 11 2
Adjusting the Volume .......................................... 11 2
Hiding Hints and Tips .......................................... 11 2
Date and Time ..................................................... 11 2
World Clock ......................................................... 11 3
Lens Retraction Timing ....................................... 11 3Using Eco Mode
 ..................................................
11 3
Power-Saving Adjustment ................................... 11 4
Screen Brightness ............................................... 11 4
Hiding the Start-Up Screen ................................. 11 4
Formatting Memory Cards .................................. 11 5
File Numbering .................................................... 11 6
Date-Based Image Storage ................................. 11 6Metric / Non-Metric Display
 .................................
11 6
Checking Certification Logos .............................. 11 7
Display Language ............................................... 11 7
Adjusting Other Settings ..................................... 11 7
Restoring Defaults ............................................... 11 7
  
						

							11 2
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Adjusting Basic Camera Functions
MENU (=  22) functions on the [3] tab can be configured. Customize 
commonly used functions as desired, for greater convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
zzChoose [Mute], and then choose [On].
•	 Operation can also be silenced by holding down the < p> button as you turn 
the camera on.
•	 Sound is not played during movies ( =
  65) if you mute camera sounds. To 
restore sound during movies, press the < o> button. Adjust volume with the 
 buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
zzChoose [Volume], and then press the 
 button.
zzChoose an item, and then press the 
 buttons to adjust the volume.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. ( =  21) or 
MENU (=  22) items. If you prefer, you can deactivate this information.
zzChoose [Hints & Tips], and then choose 
[Off].
Date and Time
Adjust the date and time as follows.
zzChoose [Date/Time], and then press the 
 button.
zzPress the  buttons to choose 
an option, and then press the < o> 
buttons to adjust the setting.
  
						

							11 3
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
World Clock
To ensure that your shots will have the correct local date and time when \
you 
travel abroad, simply register the destination in advance and switch to \
that 
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your \
home time zone, as described in “Setting the Date and Time” (=
  12).
1 Specify your destination.
zzChoose [Time Zone], and then press the 
 button.
zzPress the  buttons to choose 
[ World], and then press the  
button.
zzPress the  buttons to choose the 
destination.
zzTo set daylight saving time (1 hour 
ahead), choose [] by pressing the 
 buttons, and then choose [] 
by pressing the < q> buttons.
zzPress the  button.
2 Switch to the destination time 
zone.
zzPress the  buttons to choose 
[ World], and then press the  
button.
zz[] is now shown on the shooting screen 
(=  143).
•	 Adjusting the date or time while in [] mode (=  13) will automatically 
update your [ Home] time and date.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you pre\
ss 
the  button in Shooting mode ( =  19). To have the lens retracted 
immediately after you press the < 1> button, set the retraction timing to 
[0
 sec.].
zzChoose [Lens Retract], and then choose 
[0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. Whe\
n 
the camera is not in use, the screen quickly darkens to reduce battery 
consumption. 
1	 Configure	the	setting.
zzChoose [Eco Mode], and then choose 
[On].
zz[] is now shown on the shooting 
screen (=  143).
zzThe screen darkens when the camera 
is not used for approximately two 
seconds; approximately ten seconds 
after darkening, the screen turns off. 
The camera turns off after approximately 
three minutes of inactivity.
  
						

							11 4
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 Shoot.
zzTo activate the screen and prepare for 
shooting when the screen is off but the 
lens is still out, press the shutter button 
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Pow\
er 
Down and Display Off, respectively) as needed (=  19).
zzChoose [Power Saving], and then press 
the  button.
zzAfter choosing an item, press the 
 buttons to adjust it as needed.
•	 To conserve battery power, you should normally choose [On] for 
[Auto Power Down] and [1 min.] or less for [Display Off].
•	 The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
•	 These power-saving functions are not available when you have set Eco mod\
e 
(=
  11 3 ) to [On].
Screen Brightness
Adjust screen brightness as follows.
zzChoose [LCD Brightness], and then 
press the  buttons to adjust the 
brightness.
•	For maximum brightness, press and hold the < p> button for at least one 
second when the shooting screen is displayed or when in single-image dis\
play. 
(This will override the [LCD Brightness] setting on the [ 3] tab.) To restore 
the original brightness, press and hold the < p> button again for at least one 
second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally 
shown when you turn the camera on.
zzChoose [Start-up Image], and then 
choose [Off].
  
						

							11 5
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Formatting Memor y Cards
Before using a new memory card or a card formatted in another device, yo\
u 
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy ima\
ges 
on the memory card to a computer, or take other steps to back them up.
1 Access the [Format] screen.
zzChoose [Format], and then press the 
 button.
2 Choose [OK].
zzPress the  buttons to choose 
[Cancel], press the  buttons to 
choose [OK], and then press the  
button.
3 Format the memory card.
zzTo begin the formatting process, press 
the  buttons to choose [OK], 
and then press the  button.
zzWhen formatting is finished, [Memory 
card formatting complete] is displayed. 
Press the  button.
•	 Formatting or erasing data on a memory card only changes file 
management information on the card and does not erase the data 
completely. When transferring or disposing of memory cards, take 
steps to protect personal information if necessary, as by physically 
destroying cards.
•	 The total card capacity indicated on the formatting screen may be less t\
han 
the advertised capacity.
Low-Level FormattingPerform low-level formatting in the following cases: [Memory card error]\
 is 
displayed, the camera is not working correctly, card image reading/writing is 
slower, continuous shooting is slower, or movie recording suddenly stops. 
Low-level formatting erases all data on a memory card. Before low-level \
formatting, copy images on the memory card to a computer, or take other 
steps to back them up.
zzOn the screen in step 2 of “Formatting 
Memory Cards” (=  11 5 ), press the 
 buttons to choose [Low Level 
Format], and then press the  
buttons to select this option. A [
] icon is 
displayed.
zzFollow steps 2 – 3 in “Formatting Memory 
Cards” (=  11 5 ) to continue with the 
formatting process.
•	 Low-level formatting takes longer than “Formatting Memory Cards” (\
 =  11 5), 
because data is erased from all storage regions of the memory card.
•	 You can cancel low-level formatting in progress by choosing [Stop]. In th\
is 
case, all data will be erased, but the memory card can be used normally.
  
						

							11 6
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) 
and saved in folders that store up to 2,000 images each. You can change 
how the camera assigns file numbers.
zzChoose [File Numbering], and then 
choose an option.
ContinuousImages are numbered consecutively (until the 9999th shot is taken/
saved) even if you switch memory cards.
Auto Reset Image numbering is reset to 0001 if you switch memory cards, or 
when a new folder is created.
•	 Regardless of the option selected in this setting, shots may be numbered\
 
consecutively after the last number of existing images on newly inserted\
 
memory cards. To start saving shots from 0001, use an empty (or formatted 
(=
  11 5 )) memory card.
•	 Refer to “Software Instruction Manual” ( =  125) for information on the card 
folder structure and image formats.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the\
 
camera create folders each day you shoot to store shots taken that day.
zzChoose [Create Folder], and then choose 
[Daily].
zzImages will now be saved in folders 
created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information 
(=  107) and elsewhere from m/cm to ft/in as needed.
zzChoose [Units], and then choose [ft/in].
  
						

							11 7
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed 
on the screen. Other certification logos are printed in this guide, on the 
camera packaging, or on the camera body.
zzChoose [Certification Logo Display], and 
then press the  button.
Display Language
Change the display language as needed.
zzChoose [Language ], and then press 
the  button.
zzPress the  buttons to 
choose a language, and then press the 
 button.
•	 You can also access the [Language] screen in Playback mode by pressing an\
d 
holding the < m> button and immediately pressing the < n> button.
Adjusting Other Settings
The following settings can also be adjusted on the [ 3] tab.
•	 [Video System] (=
  123)
•	 [Ctrl via HDMI] (=
  122)
•	 [Wi-Fi Settings] (=
  83)
•	 [Mobile Device Connect Button] ( =
  105)
Restoring Defaults
If you accidentally change a setting, you can restore default camera 
settings.
1 Access the [Reset All] screen.
zzChoose [Reset All], and then press the 
 button.
2 Restore default settings.
zzPress the  buttons to choose 
[OK], and then press the  button.
zzDefault settings are now restored.
•	The following functions are not restored to default settings.
- [3 ] tab settings [Date/Time] (=  11 2 ), [Time Zone] (=  11 3), [Language ] 
( =  11 7 ), and [Video System] (=  123)
- Custom white balance data you have recorded ( =  55)
- Shooting mode ( =  42)
- Wi-Fi settings (=  83)
  
						

							11 8
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Accessories
Enjoy the camera in more ways with optional Canon accessories and other \
compatible accessories sold separately
System Map ....................................................11 9
Optional Accessories ..................................... 120
Power Supplies ................................................... 120
Flash Unit ............................................................ 120
Other Accessories ............................................... 120
Printers ................................................................ 121
Using Optional Accessories..........................121Playback on a TV ................................................ 121
Powering the Camera with Household Power ..... 124Using the Software ......................................... 125Software .............................................................. 125
Computer Connections via a Cable .................... 125
Saving Images to a Computer ............................. 126
Printing Images .............................................. 127Easy Print ............................................................ 127
Configuring Print Settings ................................... 128
Printing Movie Scenes ........................................ 131
Adding Images to the Print List (DPOF) .............. 131
Adding Images to a Photobook ........................... 134
  
						

							11 9
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with\
 genuine 
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire, 
etc., caused by the malfunction of non-genuine Canon accessories (e.g.,\
 a leakage 
and/or explosion of a battery pack). Please note that this warranty doe\
s not apply to 
repairs arising out of the malfunction of non-genuine Canon accessories,\
 although you 
may request such repairs on a chargeable basis.
Note that availability varies by area, and some accessories may no longe\
r be 
available.System Map
Wrist StrapBattery Pack
NB-11LH*1Battery Charger
CB-2LF/CB-2LFE*1
USB Cable (camera end: Mini-B)*2
Memory Card Card Reader
Computer
TV/Video  System
AC Adapter  Kit 
 
ACK-DC90
Included Accessories
Power Cables
HDMI Cable (camera end: Type D)*
3
AV  Cable AVC-DC400
Flash Unit Canon-Brand PictBridge- Compatible Printers
High-Power Flash  HF-DC2
*1
 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3 Use a commercially available cable no longer than 2.5 m.
  
						

							120
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto mode / Hybrid 
Auto mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Optional Accessories
The following camera accessories are sold separately. Note that availability 
varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-11LHzzRechargeable lithium-ion battery
Battery Charger CB-2LF/CB-2LFEzzCharger for Battery Pack NB-11LH
•	The battery pack includes a convenient cover which you can attach to kno\
w 
the charging status at a glance. Attach the cover so that  is visible on a 
charged battery pack, and attach it so that  is not visible on an uncharged 
battery pack.
•	 Battery Pack NB-11L is also supported.
•	 Battery Charger CB-2LD and CB-2LDE are also supported.
AC Adapter Kit ACK-DC90zzFor powering the camera using 
household power. Recommended when 
using the camera over extended periods, 
or when connecting the camera to a 
printer or computer. Cannot be used to 
charge the battery pack in the camera.
•	The battery charger and AC adapter kit can be used in areas with 
100 – 240 V AC power (50/60 Hz).
•	 For power outlets in a different format, use a commercially available 
adapter for the plug. Never use an electrical transformer designed 
for traveling, which may damage the battery pack.
Flash Unit
High-Power Flash HF-DC2zzExternal flash for illuminating subjects 
that are out of range of the built-in flash.
Other Accessories
Interface Cable IFC-400PCUzzFor connecting the camera to a computer 
or printer.
AV Cable AVC-DC400zzConnect the camera to a TV to enjoy 
playback on the larger TV screen.