Canon Ir1024if Quick Start Guide

(iR1024F/iR1024iF Only)
Set the Receive Mode
1Press [Additional 
Functions].2Press [ ] or [ ] to 
select , then press 
[OK].3Press [] or [] to 
select , then press 
[OK].
4Press [ ] or [ ] to 
select , then press 
[OK].5Press [ ] or [ ] to 
select  , 
then press [OK].6Press [] or [] to 
select the receive mode, 
then press [OK].
7Press [Stop] to return to 
the standby mode.NOTE
For details, see the Advanced
Operation Guide.
20
 

21
Set the Machine for Network Usage
Connect the Machine to a Network
This machine has a USB connector and LAN connector. If the machine is connected to a network 
using a LAN cable, you can use the machine as a network printer, or use functions such as the I-fax 
function, which lets you send and receive faxes over the Internet.

NOTE
– The machine does not come with a LAN cable.
– You can use the iR1024A/iR1024F/iR1020 in a network environment if the optional network board is installed.
Specify the IP...

(iR1024i/iR1024iF Only)
1Connect a Category 5 or greater twisted pair LAN cable to the 10Base-T/100Base-TX port on 
the back of the machine. Connect the other end of the cable to a network router or a hub.
NOTE
If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. 
(See “Installing/Uninstalling Software (iR1024A/iR1024F/iR1024i/iR1024iF/iR1020 Only),” on p. 25.)
Specify the IP Address Manually
1Press [Additional 
Functions].2Press [ ] or [ ] to 
select...

23
4Confirm that  is 
displayed, then press 
[OK].5Confirm that  is 
displayed, then press 
[OK].6Press [ ] or [ ] to 
select , then 
press [OK].
10Use the numeric keys 
to enter the subnet 
mask, then press 
[OK].11Confirm that 
 is 
displayed, then press 
[OK].12Use the numeric keys 
to enter the gateway 
address number, then 
press [OK].
Ex.

S UBNET  MA SK
000.000.000.000 
Ex.

G ATE WAY  ADDR ESS
000.000.000.000   
 

7Confirm that  is 
displayed, then press 
[OK].8Use the numeric keys to 
enter the IP address, 
then press [OK].9Confirm that  is 
displayed, then press 
[OK].
13Turn off the main 
power on the right side 
of the machine, then 
turn on the power to 
restart the machine.NOTE
If you send documents via e-mail 
and I-fax, specify the 
E-MAIL/I-FAX settings. (See 
Chapter 3, “Network,” in the 
Advanced Operation Guide.)
Ex.
IP  ADDR ESS
000.000.000.000 
24
 

25
Installing/Uninstalling Software
Installation Procedure
Perform the following procedure to install the printer, fax, and scanner drivers. If you install these 
drivers, you can print and send faxes from your computer, and scan documents into your computer. 
Printer drivers are divided into two types: PCL and UFRII LT. 
●PCL: This is the Hewlett-Packard’s PCL printer  driver, which includes the PCL5c, PCL5e, and PCL6 
drivers. The PCL5c printer driver is for color printers, while the PCL5e and PCL6...

(iR1024A/iR1024F/iR1024i/iR1024iF/iR1020 Only)
NOTE
– The PCL printer driver is optional for the iR1024A/iR1024F/iR1020. You can use the PCL printer driver if the optional PCL kit  is 
installed.
– The fax driver is available only for the iR1024F/iR1024iF.
– The scanner driver is available only through a USB connection.
– You can use the iR1024A/iR1024F/iR1020 as a network printer if the optional network board is installed.
USB Connection
Microsoft Windows Server 2003*
CPU: Intel Pentium/Celeron series...

27
8910
13 14 15
Attach the ferrite core (A) as 
close as possible to the B-type 
side (square) of the USB cable 
(B). (iR1024i/iR1024iF only)
 

11 12
16
Connect the machine and your 
computer with a USB cable 
(A).
NOTE
– The USB cable is not included.
– If the Found New Hardware  Wizard appears, click [Cancel] 
and continue the installation.
17
You have now completed 
installation.
A
28
 

29

Network Connection (iR1024i/iR1024iF Only)
12
If the CD-ROM Setup screen 
is not displayed, click [start] on 
the Windows task bar, and 
then click [My Computer].
For Windows Vista/Server 
2008, click [Start] on the 
Windows task bar, and then 
click [Computer].
For Windows 2000/Server 
2003, double-click [My 
Computer] on the Windows 
desktop.
456
10
Repeat this step for each 
driver that you have selected.
11
15 16 17
You have now completed 
installation.