Canon Ir Advance C5051 User Guide

							1
Scan Settings3-75
3
Using the Send and Fax Functions in the Voice Navigation
5Enter the desired zoom ratio 
percentage using   -    (numeric 
keys)   press   (Con firm).
The voice guide announces that the ratio 
you have entered.
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-76
6Press  (Con firm) until you return 
to the Basic Features screen.
NOTE
If you enter a value outside the settings 
range, you will hear a voice guidance 
message prompting you to entering 
appropriate value.
7Press  (Start).
NOTE
To return the zoom ratio to 100%, move 
the focus to [Direct(100%)]/[1:1(100%)]   
press  (Select).
 
						

							1
Scan Settings3-77
3
Using the Send and Fax Functions in the Voice Navigation
Auto Zoom
IMPORTANT
This mode can only be speci fied from the 
Scan and Send Basic Features screen.
1Place your originals   specify the 
destination.
NOTE
For instructions on specifying the 
destination, see Flow of Sending 
Operations, on p. 3-5.
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-78
2Press   (Back) or   (Next) to 
move the focus to [Options]   press 
 (Select).
If necessary, see the screen shot in step 
3 of Preset Zoom, on p. 3-68.
The voice guide announces that the 
Options selection screen is displayed.
NOTE
If the [Copy Ratio] shortcut key is 
displayed on the Scan and Send Basic 
Features screen, you can select from the 
Scan and Send Basic Features screen.
3Press   (Back) or   (Next) to 
move the focus to [Copy Ratio]   
press  (Select).
The voice guide announces that the 
Copy Ratio setting screen is displayed.
 
						

							1
Scan Settings3-79
3
Using the Send and Fax Functions in the Voice Navigation
4Press   (Back) or   (Next) to 
move the focus to [Auto]   press 
 (Select).
5Press  (Con firm) until you return 
to the Scan and Send Basic Features 
screen.
 
						

							Using the Send and Fax Functions in the Voice Navigation
1
3
Scan Settings
3-80
6Press  (Start).
NOTE
To return the zoom ratio to 100%, move 
the focus to [Direct(100%)]/[1:1(100%)]   
press  (Select).
 
						

							CHAPTER
4-1
4Customizing Settings
This chapter explains how to change the 
default settings of the Voice Navigation mode, 
and customize them to suit your needs.Enabling/Disabling the Voice 
Navigation Mode . . . . . . . . . . . . . . . . . . . . .  4-2
Setting the Maximum Volume of 
the Voice Guidance . . . . . . . . . . . . . . . . . . .  4-5
Setting the Auto Reset Mode  . . . . . . . . . . .  4-8
Voice Type Settings . . . . . . . . . . . . . . . . . .  4-12
Volume and Voice Speed Settings  . . . . . .  4-15
Enabling/Disabling the Voice Guide from 
Speaker  . . . . . . . . . . . . . . . . . . . . . . . . . .  4-21
 
						

							Enabling/Disabling the Voice Navigation 
Mode
4-2
Customizing Settings
4
Enabling/Disabling the Voice Navigation 
Mode
Enable the Voice Navigation mode to hear 
explanations and instructions while operating 
the machine.
IMPORTANT
When the Voice Navigation mode is 
disabled, the Voice Navigation mode will not 
start even if you press and hold   (Reset) 
for more than 
five seconds.
NOTE
•The default setting is On.
•There is no Voice Navigation message 
available to guide you to Voice Navigation 
Settings screen in Accessibility(from 
Settings/Registration screen). This setting 
must be speci fied by pressing keys on the 
touch panel display only. Therefore, please 
seek assistance from the administrator, if 
necessary.
•This setting can only be speci fied by the 
administrator.
•Even if you change this setting, the Voice 
Navigation Settings will not return to their 
default values.
 
						

							1
Enabling/Disabling the Voice NavigationMode4-3
4
Customizing Settings
1Press  (Settings/Registration) 
 
[Preferences]   [ ]   [Accessibility] 
  [Voice Navigation Settings]   [Use 
Voice Navigation].
2Select [On] or [Off]   press [OK]. 
The selected mode is set.
 
						

							Customizing Settings
1
4
Enabling/Disabling the Voice Navigation 
Mode
4-4
3Press [Close] repeatedly until the 
Main Menu screen appears.
NOTE
The voice guide will not star t until you 
press   (Reset) for more than 
five 
seconds.