Canon Ir 2200 User Guide

Using the Touch Panel Display1-31
1-311-31 1-31
1
11 1
Before You Star t Using This Machine
Adjusting the Brightness of the Touch Panel Display
Adjusting the Brightness of the Touch Panel DisplayAdjusting the Brightness of the Touch Panel Display Adjusting the Brightness of the Touch Panel Display
If the touch panel display is difficult to view, use the display contrast dial on the control panel to 
adjust its brightness.
NOTE
•
•• •To make the touch panel brighter, turn the dial counterclockwise. To...

Entering Characters from the Touch Panel Display1-32
1-321-32 1-32
Before You Star t Using This Machine
1
11 1
Entering Characters from the Touch Panel 
Entering Characters from the Touch Panel Entering Characters from the Touch Panel  Entering Characters from the Touch Panel 
Display
DisplayDisplay Display
In screens which require alphanumeric entry, enter characters using the alphabet key s display ed 
in the touch panel display, as described below.
Entering Alphabet Characters
Entering Alphabet...

Entering Characters from the Touch Panel Display1-33
1-331-33 1-33
1
11 1
Before You Star t Using This Machine
2
22 2Enter .
Enter .Enter . Enter .
 is displayed.
To enter a space, press “Space.”
To move the cursor, press “ ” or “ .”
To enter special characters, press  “Entry Mode” before you press  “OK” to select  “Other.” 
NOTE
•
•• •If you make a mistake when entering characters, use “ ” or “ ” to position the cursor, and 
“Backspace” to delete the character. Then, enter the correct character.
•
••...

Entering Characters from the Touch Panel Display1-34
1-341-34 1-34
1
11 1
Before You Star t Using This Machine
Entering Special Characters
Entering Special CharactersEntering Special Characters Entering Special Characters
Example: Enter .
1
11 1Press “Entr y Mode” to select “Other.”
Press “Entr y Mode” to select “Other.”Press “Entr y Mode” to select “Other.” Press “Entr y Mode” to select “Other.”
Each press of “Entry Mode” switches the entry mode between “Alphabet” and “Other”.
2
22 2Press “
Press “Press...

Entering Characters from the Touch Panel Display1-35
1-351-35 1-35
1
11 1
Before You Star t Using This Machine
To enter a space, press “Space.”
To move the cursor, press “ ” or “ .” 
To enter alphabet characters, press “Entry Mode” before you press “OK” to select “Alphabet.”
NOTE
•
•• •If you make a mistake when entering special letters, use “ ” or “ ”  to position the cursor, and 
“Backspace” to delete the character. Then, enter the correct character.
•
•• •You can also delete all characters you have...

Entering Characters from the Touch Panel Display1-36
1-361-36 1-36
1
11 1
Before You Star t Using This Machine
Entering in Inches
Entering in InchesEntering in Inches Entering in Inches
When you want to enter values in inches in all modes which require numeric entry, set the inch 
entry function to “On” from the Common Settings of the Additional Functions screen. (See 
‘Setting Inch Input,’ on p. 3-12.) You can then enter inches once you press “Inch” in a screen  
requiring numeric entry.
The following...

Entering the Department ID and Password1-37
1-371-37 1-37
Before You Star t Using This Machine
1
11 1
Entering the Depar tment ID and Password
Entering the Depar tment ID and PasswordEntering the Depar tment ID and Password Entering the Depar tment ID and Password
When Department ID Management has been set, the Department ID and Password must be 
entered before operating this machine.
NOTE
•
•• •When you are using the control card, the message  appears in the 
touch panel display. Insert the control card...

Entering the Department ID and Password1-38
1-381-38 1-38
1
11 1
Before You Star t Using This Machine
2
22 2Press 
Press Press  Press  .
.. .
The Basic Features screen of the selected function appears on the touch panel display.
If the Department ID and/or Password that you entered are wrong, the message  appears. Repeat the procedure from step 1.
JKL
TUVMNO
WXYZ
Stop
;ownloadedyfromyXanuals'rinterScomyXanuals 

Entering the Department ID and Password1-39
1-391-39 1-39
1
11 1
Before You Star t Using This Machine
Operations After Using Copy Functions
Operations After Using Copy FunctionsOperations After Using Copy Functions Operations After Using Copy Functions
1
11 1When your copy operations are completed, press
When your copy operations are completed, pressWhen your copy operations are completed, press When your copy operations are completed, press on the control panel.
on the control panel.on the control...

Placing Originals1-40
1-401-40 1-40
Before You Star t Using This Machine
1
11 1
Placing Originals
Placing OriginalsPlacing Originals Placing Originals
Set the originals on the platen glass or in the feeder, depending on the size and type that you 
want to print and the settings that you have programmed.
NOTE
•
•• •If the original has too many pages to be placed in the feeder all at once during basic Copy/Mail Box 
operations, use the Job Build mode. (See the Copying Guide and the Mail Box Function...