Canon Imageprograf Ipf825 Mfp M40 User Guide

Printer parts
Front ................................................................................................................................................................ 685
Back ................................................................................................................................................................ 687
 
Top Cover (Inside)...

f.
Stationary Output Stacker
A cloth tray that catches ejected documents. 
 (See "Stationary Output Stacker.") →P.658
g.
Paper Feed Slot
When loading a roll, insert the edge of the roll paper here.
h.
Holder Stopper
Secure rolls on the Roll Holder with this part.
i.
Ink Tank Cover
Open this cover to replace an Ink Tank.   (See "Ink Tank Cover (Inside).") →P.690
j.
Control Panel
Use this panel to operate the printer and check the printer status. 
 (See "Control Panel.") →P.692
k....

Back
a.
Carrying Handles
When carrying the printer, have six people hold it by these handles under both sides.
b.
Media Take-up Unit Power Inlet
Connect the power cord of the optional Media Take-up Unit here.
c.
Ethernet Port
Connect an Ethernet cable to this port. The lamp is lit if the Ethernet cable is connected correctly and communication is
possible between the computer and printer.
d.
USB Port
Connect a USB cable to this port. The printer is compatible with Hi-Speed USB connections.
e.
Manual...

g.
Accessory Pocket
Store assembly tools, Roll Holder attachments, and other items in this pocket.
Top Cover (Inside)
a.
Top Cover Roller
Prevents paper from rising when ejected.
b.
Paper Alignment Line
Align paper with this line when loading it.
c.
Carriage
Moves the Printhead. The carriage serves a key role in printing. 
 (See "Carriage.") →P.689
d.
Carriage Shaft
The Carriage slides along this shaft.
e.
Paper Retainer
Important in supplying the paper. This retainer holds paper as it is fed....

f.
Platen
The Printhead moves across the platen to print. Vacuum holes on the platen hold paper in place.
g.
Borderless Printing Ink Grooves
For catching ink outside the edges of paper during borderless printing.
h.
Cleaning Brush
When cleaning inside the printer under the Top Cover, use this brush to sweep away paper dust on the Platen.
Also use the brush to move the blue Switch on the Platen. i.
Cutter Rail
The Cutter Unit passes over this rail to cut paper.
j.
Cutter Unit
A round-bladed cutter for...

Ink Tank Cover (Inside)
Note: The figure shows the printer as loaded with 700 ml (23.7 fl oz) Ink Tank.
a.
Ink Tanks
Cartridges of ink in various colors.
b.
Ink Tank Lock Lever
A lever that locks the Ink Tank in place and protects it. Lift and lower the lever when replacing an Ink Tank. To open
it,  lift  the  stopper  of  the  lever  until  it  stops,  and  then  push  it  down  toward  the  front.  To  close  it,  push  it  down  until  it
clicks into place. c.
Ink Lamp (Red)
Indicates the state of the...

Printer Parts > Printer parts >
iPF815
Ink Tank Cover (Inside) 9
691
 

Control Panel
Control Panel ................................................................................................................................................... 692
 
Turning the Printer On and Off ........................................................................................................................ 694
Printer Modes .................................................................................................................................................. 696...

c.
Data lamp (Green)
•
Flashing
During printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this lamp
flashes when the print job is paused or the printer is updating the firmware. •
Off
There are no active print jobs when the Data lamp is off.
d.
Message lamp (Orange)
•
On
A warning message is displayed.
•
Flashing
An error message is displayed.
•
Off
The printer is off or is operating normally.
e.
Paper Source Section
After you press the Feeder Selection...

k.
▲ Button
Offline: Press this button to rewind rolls manually.
 (See "Feeding Roll Paper Manually.") →P.638
Menu mode: Press this button to display the previous menu item or setting value. l.
▼ Button
Offline  mode:  Press  this  button  to  feed  the  roll  manually  in  the  direction  of  ejection,  as  needed. 
(See  "Feeding  Roll
Paper Manually .") →P.638
Menu mode: Press this button to display the next menu item or setting value. m.
▶ Button
Menu mode: Press this button to...