Canon Imageprograf Ipf815 User Guide

9.
Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source list.
11. Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. Working With Various Print Jobs 
> Printing CAD Drawings >
iPF815
Printing Line Drawings and Text (Mac OS X) 2
25
 

12.
Make  sure CPage  Size   on  the Page  Setup  pane  shows  the  original  size  as  specified  in  CPaper  Size   in  the Page
Attributes dialog box—in this case,  ISO A3.13.
Specify additional printing conditions.
For details on available printing conditions, see " Printer Driver Settings (Mac OS X) →P.425
"
14. Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429
"...

Color Setting
Description
Color (CAD) 5 Print emulating the HP Designjet 1000, in colors resembling colors produced by
this printer.
Color (CAD) 6 Print emulating the HP Designjet 4000/4500, in colors resembling colors produced
by these printers. Important
• If you have selected  Color (CAD) 3, Color (CAD) 4, Color (CAD) 5, or  Color (CAD) 6, it is not possible
to match the colors and image quality produced by the specified printer exactly.
For instructions on configuring  Color Compatibility, refer to...

3.
Click the  Device Settings tab to display the  Device Settings sheet. 4.
Click  AColor Compatibility  to display the Color Compatibility dialog box. 5.
Select the desired color settings in the  AColor Compatibility list. Note
• For details on color settings, see " Specifying Colors and Printing CAD Drawings →P.26
"
For printing instructions, refer to the following topic. •Choosing the Document Type and Printing Conditions (Windows) →P.58
HP-GL/2 Printing
This printer supports the original...

The printer automatically switches to the corresponding processing depending on whether a GARO, HP-GL/2, or HP RTL
job is received. Configure the optional settings for HP-GL/2 emulation on the printer control panel. 
 (See "Main Menu Set-
tings.") →P.722
This printer can emulate the following printers using HP-GL/2 emulation. Emulated Printers
Canon
W3000 and W3050(*3 →P.29
)
Hewlett-Packard Designjet 450c, Designjet 750c Plus, and Designjet 750c *1: HP-GL/2: Hewlett-Packard Graphics Language 2;...

Printing Photos and Images
Printing Photos and Images .............................................................................................................................. 30
Printing Photos and Images (Windows) ........................................................................................................ 31
Printing Photos and Images (Mac OS X) ...................................................................................................... 33Printing Photos and Images
Printing...

Print Quality
Choose the print quality.
The printing mode is determined by a combination of the print quality and resolution. Print Quality
Description
Highest A setting for printing at the highest resolution when quality is most important.
Printing takes longer and consumes more ink than in other modes, but this mode
offers superior printing quality.
High Choose this setting to print at high resolution when quality is most important.
Printing takes longer and consumes more ink than in  Standard or Draft...

3.
Make sure the  Main sheet is displayed. 4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Premium Glossy Paper 200.
In  the AMedia  Type,  choose  the  type  of  paper  used  for  printing,  such  as  Glossy  Paper,  Coated  Paper,  and  so  on.
Make sure the paper you select is loaded in the printer. Note
• The 
paper  type  setting  in  the  printer  driver  and  related  software  (as  well  as  on  the  Control  Panel  )  is
updated  when  you  install  the...

6.
Click the  Page Setup tab to display the  Page Setup sheet.7.
In the  APage Size  list, click the size of the original as specified in the application. In this case, click  10"x12".
8. Select and click a roll paper in the  LPaper Source list.
9. Select the width of the loaded roll in the  MRoll Paper Width list—in this case,  10-in. Roll (254.0mm).
10. Specify additional printing conditions.
For details on available printing conditions, see " Printer Driver Settings (Windows) →P.202
"...

1.
This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu. 2.
Select the printer in the  APrinter...