Canon Imageprograf Ipf815 User Guide

1.
This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu. 2.
Select the printer in the  APrinter...

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Printing enlargements or reductions >
Resizing Originals to Fit the Roll Width (Mac OS X)
iPF8153
76
 

11.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  16 in. (406.4mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information.
12. Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.13.
Select the  DEnlarged/Reduced Printing check box.
14. Click...

Scaling
Enlarge or reduce originals by a particular amount, as desired. For instructions on entering a scaling value to resize originals, refer to the following topics, as appropriate for your comput-
er and operating system.
•Resizing Originals by Entering a Scaling Value (Windows) →P.78
• Resizing Originals by Entering a Scaling Value (Mac OS X) →P.80
Note
• For better  printing  results  when  enlarging  photos  from  a  digital  camera  in  TIFF  or  JPEG  format,  use  an  im-
age-editing...

3.
Make sure the  Main sheet is displayed. 4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Select the printing application in the  EPrint Target  list.
6. Click the  Page Setup tab to display the  Page Setup sheet. Enhanced Printing Options > Printing enlargements or reductions >
iPF815
Resizing Originals by Entering a Scaling Value (Windows) 3
79
 

7.
Select and click a roll paper in the  LPaper Source list.
8. Select the width of the loaded roll in the  MRoll Paper Width list—in this case,  ISO A2/A3 Roll (420.0mm).
9. In the  APage Size  list, click the size of the original as specified in the application. In this case, click  ISO A4.
10. Select the  CEnlarged/Reduced Printing  check box.
11. Click ISO A4 in the  GPaper Size  list.
12. Click FScaling and enter 120. Note
• You can specify enlargement that exceeds the paper size, but in this case,...

•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
 
1. This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in...

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Printing enlargements or reductions >
Resizing Originals by Entering a Scaling Value (Mac OS X)
iPF8153
82
 

11.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 12.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.13.
Select the  DEnlarged/Reduced Printing check box....

14.
Click GScaling and enter 120. Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in  the  upper-left  corner.  In  this  case,  you  can  center  originals  by  selecting  the  JPrint  Centered
check box.
15. Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on...