Canon Imageprograf Ipf815 User Guide

Note
• You can input between 25 and 400.
• You can change the numbers by clicking  ▼ button.Format Dialog Box
This dialog box appears when you select 
Format from the Object menu after you select an object.Size Sheet
You can rotate, enlarge, or reduce an object. Note
• When the objects are not selected, you can not select  Format. Rotate
When you place a checkmark here, you can select  Rotate Right or Rotate Left.Setting
Details
Rotate Right Rotates the object 90 degrees clockwise.
Rotate Left Rotates...

Enl./Red.
When you place a checkmark here, you can select  Scaling, Fit Paper Size, or Fit Photo Size. Setting
Details
Scaling Allows you to input the value of the enlargement or reduction ratio of an object.
Fit Paper Size Prints by enlarging or reducing each object to match the paper size. If you are using
roll paper, objects are enlarged or reduced so that the width of each object matches
the width of the roll paper.
Fit Photo Size Prints all of the objects at the specified photo size.Note
• You can...

Setting
Details
Page Pos You can input the number of the page position in numerical characters.Object Size
You can confirm the object size. Note
• When several objects are selected, you cannot display  Object Size. Laying out a Multiple-File Document on One Page
You can lay out and print a multiple-file document on one page.
1. From the application software's  File menu, select the printer setup menu to open the  Print dialog box. Note
• Normally, select  Print from the File menu.
2. Click...

3.
In the  Page Setup sheet, select Paper Source .Note
• Your printer is depicted in the lower-left area of this screen.
4. In the  Layout  sheet, click on the  Page Layout check box and select Free Layout from the list.Windows Software > Free Layout >
Laying out a Multiple-File Document on One Page
iPF8154
268
 

Note
• Your printer is depicted in the lower-left area of this screen.
• When you select Free Layout, all other setting items will be disabled.
5. Click the  OK button to save the settings.
6. In the Print dialog box, select the pages to print and the number of copies, and click the  OK button.Free Layout starts, laying out the document created with application software in the layout area as an object. Windows Software > Free Layout >
iPF815
Laying out a Multiple-File Document on One Page 4
269
 

7.
Leaving Free Layout running, open other files with the application software and repeat the above steps. Laying out a Document Created with Multiple Application Programs on One Page
You can lay out and print a document created with multiple application programs on one page.
1. From the application software's  File menu, select the printer setup menu to open the  Print dialog box.Note
• Normally, select  Print from the File menu.
2. Click  Properties to open the  Properties dialog box. Windows...

3.
In the  Page Setup sheet, select Paper Source .Note
• Your printer is depicted in the lower-left area of this screen.
4. In the  Layout  sheet, click on the  Page Layout check box and select Free Layout from the list. Windows Software > Free Layout >
iPF815
Laying out a Document Created with Multiple Application Programs on One Page 4
271
 

Note
• Your printer is depicted in the lower-left area of this screen.
• When you select Free Layout, all other setting items will be disabled.
5. Click the  OK button to save the settings.
6. In the Print dialog box, select the pages to print and the number of copies, and click the  OK button.Free Layout starts, laying out the document created with application software in the layout area as an object.Windows Software > Free Layout >
Laying out a Document Created with Multiple Application Programs on One...

7.
Leaving Free Layout running, open other files with other application software and repeat the above steps. Selecting an Object
When an object is selected, a select box (blue border) appears around the object. Note
• To select an object, click that object.
• To select multiple successive objects, click them while holding down the Shift key.
• To select multiple arbitrary objects, click them while holding down the Ctrl key.
• To select all objects, select  Select All from the Edit menu.
• When you...

Changing the Object Size
You can change the object size by means of mouse operation or by specifying a scaling value. Note
• The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced. Resizing by means of mouse operation
1. Select an object.
2. Place 
the pointer at a corner of the selection box around the object to show the arrow handle, and drag this handle to
change the object size. Resizing by specifying a scaling value
1. Select an object.
Click on the  Enl./Red....