Canon Imageprograf Ipf815 Mfp M40 User Guide

Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format Printing) .....................................................................115
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) ................................................116
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) ..............................................120
 
Printing on Non-Standard Paper Sizes...

Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
This topic describes how to print a banner about five times as long as the roll width based on the following example. •Document: A horizontal banner created in Microsoft Word
• Page size: Non-standard (100×500 mm [3.9×19.7 in])
• Paper: Roll
• Paper type: Plain Paper
• Roll paper width: 16 in (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format. 1. Register a Custom Paper Size.
Banners 
tend to...

4.
Click  OSize Options to display the  Paper Size Options dialog box.
5. Enter a desired paper name in  Custom Paper Size Name. My Horizontal Banner  is used in this example.
6. In Units , click mm.
7. Under Paper Size, enter  100 in Width and 500 in Height .
8. Click Add to add the paper size of  My Horizontal Banner.
9. Click OK to close the  Paper Size Options dialog box.
10. Close the printer driver dialog box. Note
• You can also specify a  Custom Size as the paper size. Note that  Custom Size...

3.
Make sure the  Main sheet is displayed. 4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. After confirming that  DEasy Settings is selected, click  Poster in the  EPrint Target  list.
6. Click the  Page Setup tab to display the  Page Setup sheet.Enhanced Printing Options > Printing banners or at other non-standard sizes >
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
iPF8153
118
 

7.
In the  APage Size  list, click the size you registered,  My Horizontal Banner.
8. Select the  CEnlarged/Reduced Printing  check box. Note
• If the  CEnlarged/Reduced  Printing  check  box  is  not  displayed  on  the  Page  Setup  sheet,  clear  the
B Borderless Printing  check box.9.
Select and click a roll paper in the  LPaper Source list.
10. After you click  EFit Roll Paper Width, the  Information dialog box is displayed.
11. Select 

the width of the loaded roll in the  Roll Paper Width list. In...

If printing is unsuccessful, you may be able to print after completing the following setting.
1. On the Layout sheet, click  JSpecial Settings  to display the Special Settings  dialog box.2.
In the FineZoom Settings list, click  Yes.Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
This topic describes how to print a banner about five times as long as the roll width based on the following example. •Document: An original designed for a horizontal banner
• Page Size: Non-standard...

Follow the steps below to print a banner in either horizontal or vertical format.
1. In the application, create an original in the format of a horizontal or vertical banner.
2. Register a Custom Page Sizes (Mac OS X 10.3.9-10.5)/ Custom Paper Sizes (Mac OS X 10.6).
Banners 
tend  to  be  in  non-standard  sizes,  so  register  a  Custom  Page  Sizes  (Mac  OS  X  10.3.9-10.5)/  Custom  Paper
Sizes  (Mac OS X 10.6) in  Page Setup. In this example, 100×500 mm (3.9×19.7 in) is registered.
3. Print the...

5.
Double-click  Untitled  in  the  list  at  left,  and  then  enter  a  name  for  the  page  size  you  want  to  register.  Here,  enter
100*500.
If the Untitled size is not listed at left, click  + below the list.
6. Under Page Size , enter 10 in Width and 50 in  Height. Here, measurements are entered in centimeters.
7. Specify the margins by entering  0.3 in Printer Margins. Here, too, measurements are entered in centimeters.
8. Click  OK to close the  Custom Page Sizes dialog box.
9. In the...

6.
Access the Page Setup pane. 7.
Select and click a roll paper in the  APaper Source list.
8. Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  16 in. (406.4mm). Note
• If the width of the loaded roll is not displayed in  BRoll Width , click LPrinter Information  on the
Main pane and update the printer information. 9.
In CPage Size , make sure 100*500 is displayed, as registered in  Page Setup.
Enhanced Printing Options 
> Printing banners or at other...

10.
Select the  DEnlarged/Reduced Printing check box.
11. Click FFit Roll Paper Width.
12. Confirm the print settings, and click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429
" Printing on Non-Standard Paper Sizes
By specifying the paper size, you can print on non-standard sizes of paper.
There are two ways to print on non-standard paper sizes, as follows. Registering non-standard paper size in the printer driver
After...