Canon Imageprograf Ipf815 Mfp M40 User Guide

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list. Enhanced Printing Options > Borderless Printing >
iPF815
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) 3
105
 

11.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  10 in. (254.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 12.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  10"x12".13.
On the Page Setup pane, select the...

15.
Click EFit Paper Size under  DEnlarged/Reduced Printing .
16. In IPaper Size , click the paper size. In this case, click  10"x12" - Borderless.
17. Confirm the print settings, and then click  MPrint to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429
" Borderless Printing by Resizing Originals to Fit the Roll Width
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images)...

Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width. Note
• You can combine this function with rotating pages 90 degrees before printing so that the original width (rela-
tive to portrait orientation) matches the roll paper width in borderless printing.
For instructions on borderless printing of photos, images, and other documents to match the roll paper width, refer to the
following topics, as appropriate for your computer and operating system....

4.
Make sure the  Main sheet is displayed. 5.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
6. Select the print target in the  EPrint Target  list.
7. Click the Page Setup tab to display the  Page Setup sheet. Enhanced Printing Options > Borderless Printing >
iPF815
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) 3
109
 

8.
In the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  application.  In  this  case,  click  ISO  A4  or
Letter (8.5"x11").
9. Select and click a roll paper in the  LPaper Source list.
10. Select the  BBorderless Printing check box to display the  Information dialog box. 11.
Select the width of the loaded roll in the  Roll Paper Width list—in this case, click  10-in. Roll (254.0mm).
12. Click OK to close the  Information dialog box.
13. In CBorderless...

•
Roll paper width: 10 inches (254.0 mm)
 
1. This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu....

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Borderless Printing >
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
iPF8153
112
 

11.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  10 in. (254.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 12.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.13.
Select the  DEnlarged/Reduced Printing check box.
14....

15.
Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429
"
Enhanced Printing Options > Borderless Printing >
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
iPF8153
114