Canon Imageclass Mf7480 User Guide

Machine Settings
12‑12

Communications Settings
Setting ItemDescription
Common SettingsSets the features common to the fax and send functions.
TX SettingsSets the transmission features.
Unit NameRegisters your name/company name (max. 24 characters, 
including spaces). (See “Set the Machine for Sending 
Documents,” in the Starter Guide.)
Data Compression Ratio*1Sets the compression ratio for color scanned data. A high 
compression ratio reduces the amount of memory used 
for the document, but results in...

12‑13
Machine Settings

Communications Settings
Gamma Value for Color 
Send Jobs*1
Sets the gamma value for color scanned data. If the set value 
corresponds to the gamma value at the recipient’s machine, 
the scan exposure of the output data at the recipient’s 
machine is automatically adjusted to the level best suited to 
the quality of the original. (Gamma 1.8, Gamma 2.2, Gamma 
1.0, Gamma 1.4)
SharpnessSets the contrast of the images you scan. (1‑7)
Register Favorites ButtonStores destinations with...

Machine Settings
12‑14

Communications Settings
Switch AThe image is printed over two sheets of paper that have the 
same combined size as the received document.
On
Off
–
–
Switch BThe image is printed with blank space on paper that has the 
same width as the received document.
On
Off
–
–
Switch CThe image is reduced and printed on paper that differs in 
width from the received document.
On
Off
–
–
Switch DThe image is printed on paper that is larger in size than the 
received document.
On
Off
–
–...

12‑15
Machine Settings

Communications Settings
Received Page FooterSets whether to insert the machine’s fax number and the 
sender information on received faxes.
Off
On
–
–
Continue Printing When 
Toner Is Out
Sets whether the machine continues printing received 
documents and reports when it is running out of toner. If you 
set the machine not to continue printing, the machine stops 
printing when the toner starts to run out, and automatically 
stores the received documents in memory.
Off
On
–
–
Fax...

Machine Settings
12‑16

Communications Settings
Auto RedialSets whether to redial automatically when the other line is 
busy or a transmission error occurs. (See Chapter 4, “Sending 
and Receiving,” in the Reference Guide.)
Redial TimesSets the number of retries. (1 times−10 times)
Redial IntervalSets period of time before redialing. (2 min.−99 min.)
Transmission Error RedialSets whether the machine redials automatically when 
transmission error occurs.
On
Off
–
–
Check Dial Tone Before 
Sending
Sets...

12‑17
Machine Settings

Adjustment/Cleaning
Setting ItemDescription
Transfer Roller CleaningCleans the transfer roller. (See “Transfer Roller,” on p. 10‑11.)
Fixing Unit CleaningCleans the fixing unit. (See “Fixing Unit ,” on p. 10‑3.)
Feeder CleaningCleans the rollers of the feeder. (See “Automatic Feeder 
Cleaning ,” on p. 10‑9.)
Special Mode MSets to improve print quality or fix irregular print density. If 
print quality decreases or an irregularity in the print density 
appears, transcription output...

Machine Settings
12‑18

Adjustment/Cleaning
Special Mode OSets whether to prevent paper jams when printing on the 
back of a printed paper.
Do not use paper that has been exposed to high temperature or 
humidity for an extended period of time. Printing on such paper 
will frequently result in a paper jam.
When you select [Medium] or [High], the image may become 
faint.
–
–
MediumPaper separates easily from the cartridge, preventing paper 
jams.
HighPrevents paper jams more effectively than when [Medium]...

12‑19
Machine Settings

Adjustment/Cleaning
Rotate Collate AdjustmentAdjusts the wait time when printing with the Rotate Collate 
mode. Printing with this mode involves two different paper 
sources, and a certain wait time is required to switch them.
Speed Priority 2Medium wait time.
Image PriorityLongest wait time.
Speed Priority 1Shortest wait time.
Auto Adjustment for Dirty FeederSets whether to prevent dirt and grime in the feeder from 
appearing on your prints and copies. If the feeder is dirty,...

Machine Settings
12‑20

Printer Settings
Setting ItemDescription
1.  DEFAULT PAPERSIZE
Sets the default paper size when no paper source is specified. 
(LTR, EXECUTIV, STMT, ISO‑B5, ISO‑C5, COM10, MONARCH, 
DL, A4, A3, B4, B5, A5, 11 x 17, LGL)
If you are printing from an OS (operating system) that does not 
have a printer driver for the machine, make sure that the paper 
loaded in the paper drawer matches the paper size specified in this 
setting. If the paper size specified in this setting is not...

12‑21
Machine Settings

Printer Settings
1. IMAGE REFINEMENTSets whether to print smoothly the jagged outlines of 
characters and graphics.
ON
OFF
The results of image refinement may be different depending on the 
types of characters and graphics you want to print.
–
–
2.  DENSITY Adjusts the print density. (1‑9)
3.  TONER SAVER
Sets whether the toner saving mode is enabled.
OFF
ON
If [ON] is selected for Toner Saver, very light or finely detailed 
images may not be printed clearly.
–
–
6.  PAGE LAYOUT...