Canon I Sensys Mf8580cdw User Guide

LINKS
Setting IPv6  Addresses
Viewing Network Settings
Configuring  WINS
>ß>à>Ý>Ì>Û>Ì>â>ã>â
 

0ALJ-085
Setting IPv6 Addresses
The IPv6  addresses of the  machine can be configured via  the  Remote  UI. Before setting IPv6  addresses,
check  the  IPv4  address settings (Viewing IPv4  Settings). You  need to  set the  correct IPv4  settings to  use
IPv6  addresses.  Note that  the  scan function that  uses the  scanner  driver  or MF Toolbox  is  not  available in an
IPv6  environment. The machine can use up  to  nine of the  following  IPv6  addresses:
Type Maximum
number
available Description...

Select the [Use IPv6] check  box and  configure the required settings.
[Use IPv6]
Select the  check  box to  enable  IPv6  on  the  machine. When  not  using IPv6, clear the  check  box.
[Stateless Address]
Select the  check  box when using a stateless address. When  not  using a stateless address, clear the  check  box.
[Use Manual Address]
When  you want to  manually enter an  IPv6  address, select the  check  box and  enter the  IP  address, prefix  length, and  default
router  address in the...

NOTE
Checking whether the settings  are correct
Make  sure  that  the  Remote  UI screen can be displayed with your computer  by using the  IPv6  address of the  machine. Starting
Remote  UI
Using  the operation panel
IPv6  settings can also  be accessed from .IPv6  Settings
LINKS
Setting IPv4  Address
Viewing Network Settings
>ß>à>à>Ì>Û>Ì>â>ã>â
 

0ALJ-086
Viewing Network Settings
Viewing IPv4  Settings
Viewing IPv6  Settings
Viewing the MAC Address
Viewing Wireless LAN Settings  and  Information (MF8580Cdw  / MF8280Cw Only)
NOTE
The IP  address is  not  correctly configured if  it is  displayed as "0.0.0.0".
Connecting the  machine to  a switching hub or bridge  may  result in a connection failure  even when the  IP  address is  correctly
configured. This problem can be solved by setting a certain interval  before the  machine starts...

Press  .
Use  /  to select ,  and  press  .
If  the  logon screen appears, enter the  correct ID and  PIN  using the  numeric keys, and  then  press .Logging  on  to the
Machine
Select ,  and  press  .
If  the   message is  displayed,  select , and  press .
Read the message  that  is  displayed,  and  press  .
Select ,  and  press  .
Select the setting to view, and  press  .
Viewing  WEP and  WPA/WPA2-PSK  information
1Select ,  and  press .
2View the current security settings, and  press .
If  the...

0ALJ-087
Configuring the Machine for Printing or Faxing from a Computer
When  using the  machine as a network printer or a PC-to -fax  machine, you can configure the  protocols and  ports used for  printing and
create a print server  for  the  machine. Before configuring the  machine for  printing or faxing from a computer, perform  the  basic  setup
procedures,  including the  printer driver  installation  (MF  Driver  Installation  Guide).
NOTE
Printing  protocols are  rules for  delivering document...

0ALJ-088
Configuring Printing Protocols and WSD Functions
Configure the  protocols that  are  used for  printing documents from a networked computer. The protocols supported by the  machine
include  LPD, RAW, and  WSD (Web Services on  Devices).
NOTE
To change protocols'  port numbers, see  Changing Port Numbers.
Start  the Remote UI  and  log  on in System Manager Mode.Starting Remote UI
Click [Settings/Registration].
Click [Network Settings]   [TCP/IP  Settings].
Configure printing protocols....

[Use LPD Printing]
Select the  check  box to  print via  LPD. When  not  using LPD  printing,  clear the  check  box.
[Use RAW Printing]
Select the  check  box to  print via  RAW. When  not  using RAW printing,  clear the  check  box.
3Click [OK].
Configuring WSD
1Click [Edit...] in [WSD Settings].
2Configure the settings as necessary.
[Use WSD Printing]
Select the  check  box to  print via  WSD. When  not  using WSD printing,  clear the  check  box.
[Use WSD Browsing]
Select the  check  box to  obtain...

Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
NOTE
Using  the operation panel
LPD, RAW, and  WSD settings can also  be accessed from .
LPD Print Settings
RAW Print Settings
WSD Settings
Setting up WSD network devices on Windows Vista/7/8
The WSD printer and  scanner  can be added from the  printer folder.  Open  the  printer folder (Displaying the Printer Folder)click [Add a device] or [Add a printer] and  follow  the  on -screen instructions. For...