Canon I Sensys Mf8230cn User Guide

The screens for  specifying a  location in  which  the  MF Toolbox  is installed and position to which  the  start  menu is added  appear.
Specify the  settings in  the  respective  screens,  and then  click  [Next]. Click  [Start] in  the  displayed screen.
15
Click  [Exit].
The software  for  which  the  check box was  selected in  step4 is installed.
Follow the  on- screen  instructions.
16
When  the  following screen appears, read the  displayed information, click [Accept] or [Do Not  Accept], and...

If  you  select  [Accept]:
The Product Extended Survey Program (the program to investigate  the  state  of usage) will  be installed.
The Product Extended Survey Program is the  program to send  the  information  related to the  usage of this  machine  to Canon
every month  for  ten  years. Any other information  including  your  personal information  is not  sent. You  can also uninstall the  Product Extended Survey Program.
Uninstalling  the  Product Extended Survey Program (For Windows) 
17
Confirm...

In the  case of USB connection, wait  until your  computer  is restarted.
USB Cable Connection (Only  when  Connecting with  USB) In the  case of network connection, check the  installation results.
Checking  the  Installation  Results  (For Windows) 
>Þ>ã>Ì>Û>Ì>ã>à
 

0AWU-00X
To  connect with  USB,  connect the  USB cable  after  installing the  software.
After completing the  procedures  described in  this  section, proceed to the  procedures  in  Registering the  Printer  and Fax
(For Macintosh) .
The installation screen  varies depending on the  version of Mac OS X.
Be sure  to close  all  applications that are running.
1
Insert the  User  Software  CD - ROM  into the  slot on  your  computer.
2
Double - click the  CD - ROM  icon, and  then double- click the...

4
Read  the  License Agreement  and  click [Continue].
5
Click  [Agree].
6
When  the  following screen appears, click [Continue].
>Þ>å>Ì>Û>Ì>ã>à
 

You  cannot  change the  installation location.
7
Click  [Install].
The [Change  Install Location] button  may appear,  but  you cannot  change the  installation location.
8
Enter  your  [Name]  and  [Password], and  click [OK].If  you are using  Mac OS X 10.7.x or later, click  [Install Software].
>ß>Ü>Ì>Û>Ì>ã>à
 

9
When  the  following screen appears, click [Close].
In the  case of USB connection, proceed to USB Cable Connection (Only  when  Connecting with  USB) .
In the  case of network connection, proceed to  Registering the  Printer  and Fax (For Macintosh) .
>ß>Ý>Ì>Û>Ì>ã>à
 

0AWU-008
1
Remove  the  cap  that covers the  USB  port on  the  back side of the  machine.Pull the  string forward  to remove  the  cap, as shown below.
2
Connect  the  USB  cable. Connect the  flat  end (a) to the  USB port on the  computer.
Connect the  square end (b) to the  USB port on the  machine.
If  a dialog  box  is  displayed:
Follow the  on- screen  instructions and complete installation.
In the  case of Windows,  check the  installation results.
Checking  the  Installation  Results  (For...

0AWU-009
Check if the  MF drivers, MF Toolbox, and e - Manual are installed correctly.
Check if the  following icons  are displayed for  the  installed applications.NOTE
About Icons  That Are Displayed:
Icons  for  each  driver may be displayed separately or only representative icon may be displayed depending on the
operating  system.
Software Location Icon
Printer  driver [Printers and Faxes], [Printers], or [Devices and Printers] folder
Fax driver [Printers and Faxes], [Printers], or [Devices and...

0AWU-013
To  print  or send  faxes  from a  Macintosh, you need to register  this  machine  in  the  Macintosh. The registration  method
varies depending on the  connection method. Select  a  method according to your  environment.To  use the  scanning  function via a  network connection, you need to register  the  scanner  to the  MF Toolbox. For details,
see the  Canon  Scanner Driver Guide.
Connection method Registration method
Auto IP  (Bonjour) Bonjour Connection
TCP/IP connection TCP/IP Connection...