Canon Hf M52 Owners Manual

							Additional Information Š 221
Unable to obtain an IP address- If you are not using a DHCP server, configure the camcorder’s Wi-Fi settings manually or obtain an IP address using the [Manual] setting.
- Turn on the DHCP server. If it is already on, make sure it is functioning properly.
- Make sure the address range for the DHCP server is sufficient.
- Turn on the DNS server. If it is already on, make sure it is functioning properly.
- Make sure that the DNS server’s IP address and the name for that address are correctly configured.- Set the DNS server’s IP address in the camcorder.
- If you are not using a DNS server, set the DNS address to [0.0.0.0].
- If you are using a wireless gateway router, make sure all of the devices in the network, includ- ing the camcorder, are configured with the correct gateway address.
Wi-Fi authentication unsuccessful - Make sure the camcorder and wireless router are using the same encryption method and encryption key.
- If the wireless router is using MAC address filt ering, enter the camcorder’s MAC address in the 
wireless router’s configuration screen.
Wi-Fi cannot be used while the wireless microphone is attached
- The camcorder’s Wi-Fi functions cannot be used while the optional WM-V1 Wireless Microphone is  connected to the camcorder. Disconnect the microphone from the MIC terminal and turn it off.
Wi-Fi connection terminated
- Cordless phones, microwave ovens, refrigerator s and other appliances may interfere with the 
wireless signal. Try using the camcorder in a location farther away from such appliances.
- The camcorder may not be able to connect to the wireless router if too many devices are  accessing the wireless access point.
Wi-Fi error   Incorrect authentication method - Make sure the camcorder and wireless router are correctly configured.
- Make sure the camcorder and wireless router are using the same encryption method and encryption key.
- If the wireless router is using MAC address filt ering, enter the camcorder’s MAC address in the 
wireless router’s configuration screen.
Wi-Fi error   Incorrect encryption key - The encryption key is case sensitive so make sure to enter it correctly.
Wi-Fi error   Incorrect encryption method - Make sure the camcorder and wireless router are using the same encryption method.
- If the wireless router is using MAC address filt ering, enter the camcorder’s MAC address in the 
wireless router’s configuration screen.
Wireless communication is not working correctly - Cordless phones, microwave ovens, refrigerator s and other appliances may interfere with the 
wireless signal. Try using the camcorder in a location farther away from such appliances.
- Turn off the camcorder and wireless router. After a short while, turn them on again and per- form the Wi-Fi network setup again. If the pr oblem persists contact a Canon Service Center.
COPY  
						

							222 Š Additional Information 
Do’s and Don’tsHandling Precautions
Camcorder
Be sure to observe the following precautions to ensure maximum per-
formance. 
•Save your recordings periodically.  Make sure to transfer your record-
ings to an external device such as a computer or digital video recorder 
( A 143) and save them on a regular basis. This will protect your impor-
tant recordings in case of damage and create more free space on the 
memory. Canon shall not be liable for any data loss. 
• Do not carry the camcorder by the LCD panel. Be careful when closing  the LCD panel. When using a wrist strap, do not allow the camcorder to 
swing and hit an object.
• Handle the touch screen with care.  Do not apply excessive force and, 
with the exception of the supplied stylus pen, do not use ballpoint pens 
or other hard-tipped tools to operate the touch screen. This may dam-
age the touch screen’s surface or the pressure-sensitive layer beneath 
it. 
• Do not attach protective film on the touch screen. The touch screen’s  operation is based on detecting applied pressure, so you may not be 
able to correctly operate the touch screen with an additional protective 
layer.
• Do not leave the camcorder in places subject to high temperatures (like  the inside of a car parked under direct sunlight), or high humidity.
• Do not use the camcorder near strong electromagnetic fields such as  above TVs, near plasma TVs or mobile phones.
• - /,  Do not use the camcorder’s Wi-Fi functions inside hospi-
tals, medical clinics or onboard aircraft. In addition, do not use them 
near medical equipment or sensitive electronic devices as it may affect 
their performance. In the case of pacemakers, keep the camcorder at 
least 22 cm (8.7 in.) away from the device.
• - /,  The camcorder’s Wi-Fi functions may be subject to inter-
ference from devices such as cordless phones and microwave ovens. 
Keeping as much distance as possible from these devices or using the 
camcorder’s Wi-Fi functions at a different time of day may reduce such 
interference.
COPY  
						

							Additional Information Š 223
• Do not point the lens at strong li ght sources. Do not leave the cam-
corder pointed at a bright subject.
• Do not use or store the camcorder in dusty or sandy places. The cam- corder is not waterproof – avoid also water, mud or salt. If any of the 
above should get into the camcorder it may damage the camcorder 
and/or the lens.
• Be careful of heat generated by lighting equipment.
• Do not disassemble the camcorder. If the camcorder does not function  properly, consult qualified service personnel.
• Handle the camcorder with care. Do not subject the camcorder to  shocks or vibration as this may cause damage.
• When mounting the camcorder on a  tripod, make sure that the tripod’s fas-
tening screw is shorter than 5.5 mm 
(0.2 in.). Using other tripods may dam-
age the camcorder.
• When recording movies, try to get a 
calm, stable picture.  Excessive cam-
corder movement while shooting and extensive use of fast zooms and 
panning can result in jittery scenes. In extreme cases, the playback of 
such scenes may result in visually induced motion sickness. If you expe-
rience such a reaction, stop the playback immediately and take a rest 
break as necessary.
• Do not insert the supplied stylus pen into the mouth. If swallowed, seek  medical assistance immediately.
• Handle the supplied stylus pen with extreme care and keep it out of the 
reach of children. If mishandled, the stylus pen can present a risk of 
severe eye injury and even blindness.
Long-term storage 
If you do not intend to use the camcorder for a long time, store it in a 
place free of dust, in low humidity, and at temperatures not higher than 
30 °C (86 °F).
5.5 mm
COPY  
						

							224 Š Additional Information 
Battery Pack
• Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth.
Long-term storage 
• Store battery packs in a dry place at temperatures no higher than 30°C 
(86°F). 
• To extend the battery life of the battery pack, discharge it completely 
before storing it.
• Charge and discharge all your battery packs fully at least once a year.
Remaining battery time
When you are using a battery pack that is compatible with Intelligent Sys-
tem, if the remaining battery time displayed is not correct, charge the bat-
tery pack fully. Still, the correct time may not be displayed after a large 
number of repeated uses, if a fully charged battery pack is left unused, or 
if a battery pack is used for long periods of time in high temperatures. Use 
the time shown on the screen as an approximation.
Regarding the use of non-Canon battery packs
• For your safety, battery packs that are not genuine Canon battery packs 
will not be charged even if you attach them to this camcorder or to the 
optional CG-700 Battery Charger.
• We recommend using genuine Canon battery  packs bearing the Intelligent System mark.
• If you attach to the camcorder battery packs 
that are not genuine Canon battery packs,   will appear and the 
remaining battery time will not be displayed.
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperature higher than 60 °C 
(140 °F). Do not leave it near a heater or inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop it or subject it to shocks.
• Do not get it wet.
COPY  
						

							Additional Information Š 225
Memory Card
• We recommend backing up the recordings on the memory card onto 
your computer. Data may be corrupted or lost due to memory card 
defects or exposure to static electricity. Canon shall not be liable for lost 
or corrupted data.
• Do not touch or expose the terminals to dust or dirt.
• Do not use memory cards in places subject to strong magnetic fields.
• Do not leave memory cards in places subject to high humidity and high 
temperature.
• Do not disassemble, bend, drop, or subject memory cards to shocks  and do not expose them to water.
• Check the direction before inserting the memory card. Forcing a mem- ory card into the slot if it is not correctly oriented may damage the mem-
ory card or the camcorder.
• Do not attach any labels or stickers on the memory card.
• Secure Digital (SD) memory cards  have a physical switch to prevent writ-
ing on the card so as to avoid the 
accidental erasure of the card’s con-
tent. To write-protect the memory card 
set the switch to the LOCK position.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the 
date/time and other settings. The built-in lithium battery is recharged 
while you use the camcorder; however, it will discharge completely if 
you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power 
adapter to the camcorder and leave it connected for 24 hours with the 
camcorder off.
LOCK switch
COPY  
						

							226 Š Additional Information 
Disposal
When you delete movies or initialize the memory, only the file allocation 
table is altered and stored data is not physically erased. When you dis-
pose of the camcorder or memory card or give either to another per-
son, initialize the camcorder's built-in memory ( -/,  only) or 
memory card using the [Complete Initialization] option ( A41). Fill it up 
with unimportant recordings, and then initialize it again using the same 
option. This makes recovering the original recordings very difficult.
COPY  
						

							Additional Information Š 227
Maintenance/Others
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the camcorder body. Never use chemically 
treated cloths or volatile so lvents such as paint thinner.
Lens and Instant AF Sensor
• If the lens surface or Instant AF sensor is dirty, autofocus may not work  properly.
• Remove any dust or dirt particles using a non-aerosol type blower  brush.
• Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use 
tissue paper.
LCD Touch Screen
• Clean the LCD touch screen using a clean, soft lens-cleaning cloth.
• Condensation may form on the surface of the screen when the temper- ature changes suddenly. Wipe it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between hot and cold temperatures may 
cause condensation (water droplets) to form on its internal surfaces. 
Stop using the camcorder if condensation is detected. Continued use 
may damage the camcorder.
Condensation may form in the following cases:
• When the camcorder is moved quickly from cold to warm places
• When the camcorder is left in a humid room
• When a cold room is heated rapidly
COPY  
						

							228 Š Additional Information 
To avoid condensation 
• Do not expose the camcorder to sudden or extreme changes in tem-perature.
• Remove the memory card and battery pack. Then, place the camcorder 
in an airtight plastic bag and let it adjust gradually to temperature 
changes before removing it from the bag.
When condensation is detected 
The camcorder automatically shuts off.
The precise time required for water droplets to evaporate will vary 
depending on the location and weather conditions. As a general rule, wait 
for 2 hours before resuming use of the camcorder.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter to operate the camcorder and to 
charge battery packs in any country with power supply between 100 and 
240 V AC, 50/60 Hz. Consult a Canon Service Center for information on 
plug adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings on TVs compatible with the NTSC 
system. NTSC is used in the following regions/countries:
Americas:  All of North America and Central America; most Caribbean 
islands (except in French territories like Guadeloupe and Martinique); most 
of South America (except in Argentina, Brazil and Uruguay).   Asia: Only in 
Japan, the Philippines, South Korea, Taiwan and Myanmar.   Oceania: US 
territories (Guam, American Samoa, etc.) and some Pacific islands like 
Micronesia, Samoa and Tonga.
COPY  
						

							Additional Information Š 229
General InformationAccessories
* Supplied with the camcorder; not available as an optional accessory.
**- /,  only.
 (Availability differs from area to area)
1
2
7
Aq
Aa
Af
Ag
Ah
Aj As
Ad
Ak
Al
Sq
SaS s
89
4 56
3
TV/HDTV
Digital video  recorder
Computer
External 
hard drive**
Card 
reader/writer
Optional accessories not listed below are described in more detail in 
the following pages.
1SS-600/SS-650 Shoulder StrapAdIFC-300PCU/S* or IFC-400PCU USB2WS-20 Wrist Strap Cable6CA-110 Compact Power AdapterAlHTC-100/S* or HTC-100 HDMI CableAqStylus Pen*SqSTV-250N Stereo Video CableAsMemory card
COPY  
						

							230 Š Additional Information 
NOTES
• Accessories that are compatible with the Advanced Accessory Shoe  cannot be attached to this camcorder. Look for the  Mini ADVANCED 
SHOE  logo to ensure compatibility with the mini advanced shoe.
Optional Accessories
Call or visit your local retailer/dealer for genuine Canon video accesso-
ries. You can also obtain genuine accessories for your Canon cam-
corder by calling: 1-800-828-4040, Ca non U.S.A. Information Center.
3 WL-D89 Wireless Controller
Use the wireless controller to operate 
the camcorder from a distance. This is 
especially useful when you wish to 
achieve stable shots.
To purchase this accessory, contact 
your local Canon office.
4 Battery Packs
When you need extra battery packs, 
select one of the following models: 
BP-718 or BP-727.
When you use battery packs bearing the 
Intelligent System mark, the camcorder 
will communicate with the battery and 
display the remaining usage time (accurate to 1 minute). You can only use 
and charge these battery packs with camcorders and chargers compati-
ble with Intelligent System. Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with 
genuine Canon accessories. Canon shall not be liable for any damage to 
this product and/or accidents such as fire, etc., caused by the malfunction 
of non-genuine Canon accessories (e.g., a leakage and/or explosion of a 
battery pack). Please note that this warranty does not apply to repairs aris-
ing out of the malfunction of non-genuine Canon accessories, although you 
may request such repairs on a chargeable basis.
COPY