Canon Hf M52 Owners Manual

Additional Information Š 211
Cannot connect with the wireless router.- Check that the wireless router is working correctly.
- The effective communication range between the camcorder and wireless router may vary depending on the strength of the wireless signal. Try using the camcorder closer to the wire-
less router.
- Cordless phones, microwave ovens, refrigerator s and other appliances in the line of sight 
between the wireless router and the camcorder may interfere with the wireless signal. Try 
using...

212 Š Additional Information
-/,  Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card  (A 37).
- There was an error creating the file name. Set    > [File Numbering] to [Reset] and 
initialize the memory card ( A41) or delete all the photos ( A134) and converted SD mov-
ies ( A 60).
Cannot copy - The total size of the scenes you selected to copy exceeds the...

Additional Information Š 213
-/,  Cannot play the movies in the built-in memory   Initialize only using the 
camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem- ory with this camcorder (A 41).
Cannot play the movies on this memory card - Movies cannot be played back from a 64 MB  or smaller memory card. Use a recommended 
memory card (A 37).
Cannot play the movies on this memory card   Initialize only using the camcorder - The memory card in the...

214 Š Additional Information
Check the memory card- Cannot access the memory card. Check the memory card and make sure it is inserted cor-rectly.
- A memory card error occurred. The camcorder cannot record or display the image. Try remov- ing and reinserting the memory card, or use a different memory card.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card  (A 37).
- If after the message disappears, *  appears in red, perform the following: Turn off the cam-
corder...

Additional Information Š 215
LCD screen has been dimmed   Use the [LCD Backlight] setting to change the brightness- Change the q  >  [LCD Backlight] setting to [Normal] or [Bright].
May not be possible to record movies on this memory card - You may not be able to record movies on a memory card without a Speed Class rating.  Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.
Mem. Card   Number of scenes already at maximum - The memory card already contains the maximum number of AVCHD...

216 Š Additional Information
Number of scenes already at maximum- The maximum number of AVCHD scenes (3,999 scenes) has been reached. Delete some scenes ( A60) to free some space.
Number of stories already at maximum - The gallery already contains the maximum number of stories (98 stories in any one given memory). Delete some stories ( A63) or change the recording memory for movies ( A40).
Recording program: Underwater / Surface
Turn on the camcorder while holding the zoom lever toward T or W to change...

Additional Information Š 217
Some scenes were recorded using another device and cannot be copied.- Scenes that were not recorded with this ca mcorder cannot be copied to the memory card.
Task in progress.   Do not disconnect the power source. - The camcorder is updating the memory. Wait unt il the operation ends and do not disconnect 
the compact power adapter or remove the battery pack.
There are no scenes with the selected rating - No scenes have been rated yet. Rate the scenes as you like ( A80).
-...

218 Š Additional Information
List of Messages for the Optional Video Light
-/,  List of Messages for Connecting to an External Hard Drive
-/,  List of Messages for Wi-Fi Functions
Battery charge is low. Cannot use the accessory attached to the mini advanced shoe.
- The battery charge is too low to supply power to the accessory attached to the mini advanced shoe. Charge the battery pack.
Cannot use the video light while powering the camcorder with the compact power adapter - Use a fully charged battery...

Additional Information Š 219
Cannot connect to FTP server- Make sure that the camcorder and FTP server have the same IP address configured.
- This message will appear if the encryption key is incorrect when the encryption method is set to [Open]. The encryption key is case sensitive so make sure to enter it correctly.
- The port number is usually 21 so make sure both the camcorder and FTP server are config- ured with this setting.
- If the Address setting in the FTP server is not configured, set the DNS...

220 Š Additional Information
No access points found- Cordless phones, microwave ovens, refrigerator s and other appliances may interfere with the 
wireless signal. Try using the camcorder in a location farther away from such appliances.
- Make sure that you use the wireless router’s SSID for the camcorder’s Wi-Fi settings.
- A connection cannot be established if the wireless router is using MAC address filtering. In the  camcorder’s [Wi-Fi Setup] screen, use [Check Current Configuration] to check the MAC...