Canon Hf M52 Owners Manual

Additional Information Š 201
 Viewing Photos
GdControl button [Edit]: Open the Edit 
panel ( A185)
Gf Current photo / Total number of 
photos Gg
Control button [ h]: Photo jump 
(A 133)
Gh Control button [ Ð]: Slideshow 
(A 136)
Gj Control button [ f]: Return to the 
[ Photos] index screen ( A132)
COPY  

202 Š Additional Information
7 Memory operationÜRecord, ÛRecord pause, ÐPlayback, ÝPlayback pause, ×Fast playback, ØFast reverse playback, ÕSlow playback, ÖSlow reverse playback,ÓFrame advance, ÔFrame reverse.
9 Remaining battery time
• The icon shows a rough estimate of the remaining charge as a 
percentage of the full charge of the 
battery pack. The remaining recording/playback time of the battery pack is 
displayed, in minutes, next to the icon.
• When the battery charge becomes low,   will appear in...

Additional Information Š 203
Tr o u b le ?Troubleshooting
If you have a problem with your camcorder, refer to this section. Some-
times what you think is a malfunction of the camcorder may have the 
simplest of solutions - please read the “CHECK THIS FIRST” box 
before going on to the more detailed problems and solutions. Consult 
your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power source
The camcorder will not turn on or it turns off by itself.- The battery pack is...

204 Š Additional Information
Cannot charge the battery pack.- Make sure the camcorder is off so charging can start.
- The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C (32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try 
charging it again.
- Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and  104 °F).
- The battery pack is faulty. Replace the battery pack.
- The camcorder cannot...

Additional Information Š 205
Changing the operating mode between recording (Ü)/record pause ( Û)/playback ( Ð) 
takes longer than usual.
- When the memory contains a large number of  scenes, some operations may take longer than 
usual. Save your recordings ( A146) and initialize the memory ( A41).
Movies or photos cannot be recorded properly. - This may occur as movies and photos are recorded/deleted over time. Save your recordings (A 146) and initialize the memory ( A41).
Cannot record a photo while...

206 Š Additional Information
When playing back scenes/slideshow with background music, the music track is not played 
back correctly.- This can occur when you transfer the music files to a memory card after repeatedly recording and deleting scenes (fragmented memory). Save your recordings ( A146) and initialize the 
memory card (A 41). Then, transfer the music files first and only then transfer the video 
files.
- Music tracks will not play back  correctly if the connection was interrupted while...

Additional Information Š 207
? appears on the screen.
- The camcorder has become hot while in the [Underwater] or [Surface] recording program.  Turn off the camcorder and let it cool down.
The red ON/OFF (CHG) indicator flashes rapidly (  one flash at 0.5-second 
intervals).  - The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C (32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try 
charging it again.
- Charge the battery pack...

208 Š Additional Information
Sound is distorted or is recorded at lower levels.- When recording near loud sounds (such as fire works, shows or concerts), sound may become 
distorted or it may not be recorded at the ac tual levels. Activate the microphone attenuator 
(A 188) or adjust the audio recording level manually ( A118).
There are brief stops in the sound recorded with the optional WM-V1 Wireless Microphone. - This may occur if the LOCK switch on the Eye-Fi card was set to prevent writing, causing...

Additional Information Š 209
Cannot upload files wirelessly using an Eye-Fi card.-q > [Eye-Fi Communication] is set to [Off] ( … appears onscreen). Set it to [Auto-
matic].
- Wireless communication is not available with an Eye-Fi card in recording mode or while the  optional WM-V1 Wireless Microphone is attached to the camcorder. Set the camcorder to 
playback mode or remove the WM-V1.
- - /,  Wireless communication is not available with an Eye-Fi card when the cam-
corder has established a wireless...

210 Š Additional Information
Cannot save photos on my computer- When the memory contains too many photos  (Windows – 2,500 photos or more, Macintosh – 
1,000 photos or more), you may not be able to transfer photos to a computer. Try using a card 
reader to transfer the photos on the memory card.  -/,  only: To transfer the pho-
tos in the built-in memory, copy them to the memory card in advance ( A143).
- /,  Wi-Fi Functions
Refer also to the instruction manual  of your wireless router and other 
devices...