Canon Gx 9 E Manual

Print Settings/Transfer Settings199
1Select [Print Settings].
1.Press the   button.
2. Press the   button.
3. Use the   or  button to select the 
 menu.
4. Use the   or   button to select 
[Print Settings].
5. Press the   button.
2Make settings.
1.Use the   or   button to select 
[Print Type], [Date], [File No.] or 
[Clear DPOF data].
2. Use the   or   button to specify the 
settings.
3. Press the   button.
zThe Date and File No. settings change according to the Print 
Type as follows.
- [Index]:...

Print Settings/Transfer Settings200
Image Selection Methods
Select Images & Qty.  Configures print settings for single images as you view them.
Select Range You can select a range of sequential images and  make print settings for all the images in that range.
Select by Date Configures print settings for images corresponding  to the selected date.
Select by Category Configures print settings for images in the selected  category.
Select by Folder Configures print settings for images in the selected...

Print Settings/Transfer Settings201
2Select an image and make print settings.
z[Select Images & Qty.]
Selection methods differ for the Print Type settings (p. 198).
Standard ( )/Both ( ) (p. 198)
1. Use the   or   button to select an 
image.
2. Press the   button.
3. Use the   or   button to select the 
number of print copies (up to 99).
4. Press the   button.
Index ( ) (p. 198)
1. Use the   or   button to select an 
image.
2. Press the   button to select or 
deselect it.
3. Press the   button.
• You...

Print Settings/Transfer Settings202
z[Select by Date] [Select by 
Category] [Select by Folder]
1. Use the   or   button to select a 
date, category or folder.
2. Press the   button.
3. Press the   button.
• Pressing the  FUNC./SET button again cancels the setting.
• You can select multiple dates, categories or folders.
• Pressing the   or   button will allow you to check the  images by date, category or folder.
4. Use the   or   button to select 
[OK].
5. Press the   button.
• Selecting [Cancel] cancels...

Print Settings/Transfer Settings203
You can use the camera to specify settings for images before downloading 
to a computer. Refer to the Software Starter Guide for instructions on how 
to transfer images to your computer. The settings used on the camera 
comply with the Digital Print Order Format (DPOF) standards.
Single Images
Setting the DPOF Transfer Settings
The   icon may display for a memory card with transfer 
settings set by a different DPOF-compliant camera. These 
settings will be overwritten...

Print Settings/Transfer Settings204
All the Images on a Memory Card 
1Select [Transfer Order].
1.Press the   button.
2. Use the   or   button to select   
in the   menu.
3. Press the   button.
2Select [Mark all].
1.Use the   or   button to select 
[Mark all].
2. Press the   button.
• Selecting [Reset] c ancels all transfer 
order settings.
3Select [OK].
1. Use the   or   button to select 
[OK].
2. Press the   button.
3. Press the   button.
zImages are transferred in order according to the file number....

Connecting a TV set205
Connecting a TV set
You can shoot or play back images on a television with the supplied 
AV cable.
Viewing Images on a TV set
1Turn off the camera and the TV.
2Connect the AV cable to the 
camera’s A/V OUT terminal.
• Open the camera’s terminal cover and plug the AV cable in all the way.
3Plug the other ends of the 
AV cable to the VIDEO IN 
and AUDIO IN jacks on the 
TV.
4Turn on the TV and switch it to Video mode.
5Turn on the camera.
VIDEO
Yellow
BlackAUDIO  

Connecting a TV set206
zThe video output signal can be switched (NTSC or PAL) to 
accommodate different regional standards (pp. 47, 52). The 
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
- If the video system is set incorrectly, the camera output may not display properly.
zWhen the camera is set to shooting mode, you can take 
pictures while displaying  images on the television.  

Customizing the Camera (My Camera Settings)207
Customizing the Camera (My Camera Settings)
My Camera allows you to customize the start-up image and startup, 
operation, self-timer and shutter sounds. You can change and register 
these settings, enabling you to customize the camera to suit your own 
tastes.
Changing My Camera Settings
1Select the menu item.
1.Press the   button.
2. Use the   or   button to select the 
 menu.
3. Use the   or   button to select the 
menu item.
• Select [Theme] to set all...

Customizing the Camera (My Camera Settings)208
Images recorded onto the memory card and newly recorded sounds 
can be added as My Camera settings to the   menu items. You can 
also use the supplied software to upload your computer’s images and 
sounds to the camera.  
Registering My Camera Settings
A computer is required to restore  the My Camera settings to the 
defaults. Use the supplied software (ZoomBrowser EX/
ImageBrowser) to restore the default settings to the camera.
1Select the menu item.
1....