Canon G9 X Owners Manual

141
7 Establish the connection.
 zOn the access point, hold down the WPS 
connection button for a few seconds.
 zTouch [Next].
 zThe camera connects to the access point 
and lists devices connected to it on the 
[Select a Device] screen.
8 Choose the target device.
 zTouch the name of the target device, and 
then press the [] button.
9 Install a driver (first Windows 
connection only).
 zWhen this screen is displayed on the 
camera, click the Start menu on the 
computer, click [Control Panel], and then...

142
 ●Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
Simply touch a listed device to connect again. To add a new 
device, display the device selection screen by touching [
][], 
and then configure the setting.
 ● If you prefer not to display recent target devices, choose MENU 
(= 29) ► [4] tab ► [Wi-Fi Settings] ► [Target History] ► 
[Off].
 ● You can also change the camera nickname on the screen in step 
2 (= 157). ●
When...

143
Previous Access Points
You can reconnect to any previous access points automatically by 
following step 4 in “Using WPS-Compatible Access Points” (= 140).
 ●
To connect to a device via an access point, confirm that the target 
device is already connected to the access point, and then follow the 
procedure from step 8 in “Using WPS-Compatible Access Points” 
(=
 140).
 ●
To switch access points, choose [Switch Network] on the screen 
displayed when you establish a connection, and then either follow...

144
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON 
iMAGE GATEWAY as a destination Web service on the camera. Note 
that you will need to enter an email address used on your computer or 
smartphone to receive a notification message for completing linkage 
settings.
1 Access the Wi-Fi menu.
 zPress the [] button to turn the camera 
on.
 z Press the [] button.
 zTouch [], and then press the [] 
button.
 z If the [Device Nickname] screen is 
displayed, touch [OK].
2...

145
7 Check for the notification message.
 zOnce information has been sent to 
CANON iMAGE GATEWAY
, you will 
receive a notification message at the 
email address entered in step 5.
 z Touch [OK] on the next screen, which 
indicates that notification has been sent.
 z[] now changes to [].
8 Access the page in the notification 
message and complete camera link 
settings.
 zFrom a computer or smartphone, 
access the page linked in the notification 
message.
 zFollow the instructions to complete the...

146
3 Choose [].
 zIn Playback mode, press the [] button.
 zTouch [], and then press the [] 
button.
 z Drag left or right on the screen, and then 
touch [].
 zThe Web service settings are now 
updated.
 ● If any configured settings change, follow these steps again to 
update the camera settings.
Uploading Images to Web Services
1 Access the Wi-Fi menu.
 zPress the [] button to turn the camera 
on.
 z Press the [] button.
 zTouch [], and then press the [] 
button.
2 Choose the destination.
 z Touch the...

147
Printing Images Wirelessly from a 
Connected Printer
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can 
also use an existing access point (=
 137).
1 Access the Wi-Fi menu.
 z
Access the Wi-Fi menu as described in 
step 2 in “Adding a Smartphone Using 
the Wi-Fi Menu” ( =
 136).
2 Choose [].
 z
Touch [].
3 Choose [Add a Device].
 zTouch [Add a Device].
 zThe camera’s SSID is displayed.
3 Send an image.
 zDrag images...

148
 ●Connections require that a memory card with saved images be in 
the camera.
 ●Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
You can easily connect again by choosing the device. To add 
a new device, drag left or right to access the device selection 
screen, and then configure the setting.
 ●If you prefer not to display recent target devices, choose MENU 
(= 29) ► [4] tab ► [Wi-Fi Settings] ► [Target History] ►...

149
4 Send an image.
 zDrag images left or right to choose an 
image to send, and then touch [Send this 
image].
 zImage transfer will begin. The screen 
darkens during image transfer.
 z[Transfer completed] is displayed after 
the image is sent, and the image transfer 
screen is displayed again.
 zTo end the connection, touch [] in 
the upper right of the screen, and then 
touch [OK] on the confirmation screen.
 ● Connections require that a memory card be in the camera. ●Once you have connected to...

150
2 Choose an image.
 zTouching an image to send will label it 
with a [] icon.
 zTo cancel selection, touch it again. [] is 
no longer displayed.
 z Repeat this process to choose additional 
images.
 zAfter you finish choosing images, press 
the [] button.
 zTouch [OK].
3 Send the images.
 zTouch [Send].
 ● You can also choose images in step 2 by moving the zoom 
lever twice toward [] to access single-image display and then 
touching images.
Selecting a Range
1 Choose [Select Range].
 z Following step...