Canon Fax L380 User Guide

Assembling the Machine2-5
Setting Up Your Machine
2
Assembling the Machine
Use the following instructions to assemble the main unit and its components. To see how the machine 
will look fully assembled, see “Getting Acquainted With Your Machine,” on p. 2-11.
Attaching Components
NOTE
Make sure the tabs are inserted into the slot completely.
Document Output Tray
Insert the tabs into the slots on the back of the machine.
Output Tray
Insert the tray into the corresponding slots.
 

Assembling the Machine2-6
Setting Up Your Machine
2
Installing the Paper Cassette
1Pull out the paper cassette.
2Attach the cassette extension to the cassette.
3Attach the extension cover on the back of the machine.
4Insert the paper cassette into the machine.
 

Making Connections2-7
Setting Up Your Machine
2
Making Connections
NOTE
•The use of the jacks may differ in certain countries. See Appendix C, “Country-Specific Features,” for details.•Be sure to connect any external device before using your machine.•Canon cannot guarantee that all answering machines will be compatible with your machine, due to varying 
specifications.
•If you have connected an external device to your machine, be sure to set the correct receive mode. 
(See Chapter 7, “Receiving Faxes.”)...

Making Connections2-8
Setting Up Your Machine
2
Connecting the Telephone Line
Connect the telephone line to the jack on the left side of the machine:
If you connect an answering machine to the machine, be sure to read your answering machine’s 
manual.
NOTE
You can also connect the extension phone to the jack marked   if you have not connected the optional handset.
Connecting the Power Cord
CAUTION
Follow these guidelines when connecting your machine to a power source:
- The machine is intended for...

Making Connections2-9
Setting Up Your Machine
2
Connect the power cord as follows:
1Plug the supplied power cord into the power connector on the back of the machine.
2Plug the other end of the power cord into the outlet.
NOTE
The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the 
machine still needs to warm up before you can use it.
While the machine is warming up, the message  appears in the LCD display:
When you connect the power cord to an AC...

Setting the Display Language and Country*2-10
Setting Up Your Machine
2
Setting the Display Language and Country*
When you connect the power cord to an AC outlet for the first time, you need to select the language for 
the LCD display. For some countries, you also need  to select the country where you are using the 
machine. The machine automatically switches the selectable settings and the default settings in the 
menus to suit the selected country.
Follow these steps to set the display language and...

Getting Acquainted With Your Machine2-11
Setting Up Your Machine
2
Getting Acquainted With Your Machine
Before using your machine, look over the diagrams on these pages to become familiar with the 
machine’s components.
Front View
a Document feeder trayPlace documents.bADF (Automatic Document Feeder)Holds documents and feeds them automatically into the scanning 
machine.
cDocument output trayDocuments come out here.dSlide guidesAdjust to the width of documents.eOperation panelControls the machine.
f...

Getting Acquainted With Your Machine2-12
Setting Up Your Machine
2
Rear View
aUSB portConnect the USB (Universal Serial Bus) cable.bHandset jackConnect the handset (optional).cExtension phone jackConnect an extension phone.dTelephone line jackConnect the telephone cable.
eFace up coverOpen it when you output paper face up, or remove jammed 
paper.
fPower socketConnect the power cord.gExtension coverProtects paper supply in the cassette from dirt and dust.
 

Getting Acquainted With Your Machine2-13
Setting Up Your Machine
2
The Operation Panel
l 
aMenu buttonUse this button to customize the operation of the machine.b  In Use/Memory indicatorLights when the telephone line is used or a document has been 
received in memory.
cLCD displayThe LCD display shows messages and prompts while you use the 
machine.
d  COPY buttonUse this button to switch standby display to Copy mode.e FAX buttonUse this button to switch standby display to Fax mode.f Alarm indicatorThis...

Getting Acquainted With Your Machine2-14
Setting Up Your Machine
2Special Function Buttons (One-Touch Speed Dial Panel 
Open)
r Hook buttonUse this button to dial, even with the optional handset still in the 
handset cradle.
s Directory buttonUse this button to look up fax/telephone numbers registered for 
speed dialing.
t Coded Dial buttonUse this button to dial a fax/telephone number that you have 
registered for Coded Speed Dialing.
u  Redial/Pause buttonUse this button to redial the last number that...