Canon Fax Jx510p User Guide

							5.Complete the setup  
Click OK. 
W hen you execute print, the document will be enlarged or reduced to fit to the page size. 
Page top
Стриз	стр
2!!
!
  
						

							On-screen Manual > Various Printing Methods > Scaled Printing 
Scaled Printing 
The procedure for printing a document with pages enlarged or reduced is as follows: 
1.Open the printer driver setup window
2.
Set scaled printing  
Select Scaled from the Page Layout list on the Page  Setup tab. 
3.Select the paper size for the data  
Using Page Size, select the page size that was set with your application. 
4.Set the scaling rate by using one of the following met hods: 
Select a Printer Paper Size  
Select a printer paper size, which is different from the Page Size, from the Printer Paper Size list.
If the printer paper size is smaller than the Page  Size, the page image will be reduced. If the
printer paper size is larger than the page size, th e page image will be enlarged.  Стриз	стр
4c,
!
      
						

							Specify a scaling factor  
Directly type in a value into the Scaling box. 
The current settings are displayed in the Settings Preview on the left side of the printer driver. 
5.Complete the setup  
Click OK. 
W hen you execute print, the document will be printe d with the specified scale. 
Important 
If the application software with which you created the original has the scaled printing function,
configure the settings on your application software . You do not need to also configure the same
setting in the printer driver. 
Note 
Selecting Scaled changes the printable area of the  document.  Стр%из	стр
4c,
!
   
						

							Page top
Стр(из	стр
4c,
!
 
						

							On-screen Manual > Various Printing Methods > Page Layout Printing 
Page Layout Printing 
The page layout printing function allows you to print more than one page image on a single sheet of
paper. 
The procedure for performing page layout printing i s as follows: 
1.Open the printer driver setup window
2.
Set page layout printing  
Select Page Layout from the Page Layout list on the  Page Setup tab.
The current settings are displayed in the Settings  Preview on the left side of the printer driver. 
3.Select the print paper size  
Select the size of the paper loaded in the machine  from the Printer Paper Size list.
Now you have finished setting the layout of the doc ument from left to right. 
4.Set the number of pages to be printed on one sheet an d the page sequence 
If necessary, click Specify..., specify the followi ng settings in the Page Layout Printing dialog box,  and
click OK.  Стриз	стр
=1!
!
      
						

							Pages  
To increase the number of pages to be included on a single sheet of paper, select a desired
number of pages from the list. 
Page Order 
To change the page arrangement order, select an icon from the list to change the page placement
order.  
Page Border  
To print a page border around each document page, c heck this check box. 
5.Complete the setup  
Click OK on the Page Setup tab. 
W hen you execute print, the specified number of pages will be arranged on each sheet of paper in
the specified order. 
Page top
Стр-из	стр
=1!
!
  
						

							On-screen Manual > Various Printing Methods > Poster Printing 
Poster Printing 
The poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. W hen the p ages are pasted together, they form a large print
like a poster. 
The procedure for performing poster printing is as foll ows: 
Setting Poster Printing 
1.Open the printer driver setup window
2.
Set poster printing  
Select Poster from the Page Layout list on the Page  Setup tab.
The current settings are displayed in the Settings  Preview on the left side of the printer driver. 
3.Select the print paper size  
Select the size of the paper loaded in the machine  from the Printer Paper Size list.
Now you have finished setting 2 by 2-page poster pr inting. 
4.Set the number of image divisions and the pages to be p rinted. Стр.из	стр
!
!
      
						

							If necessary, click Specify..., specify the following settings in the Poster Printing dialog box, and  then
click OK. 
Image Divisions  
Select the number of divisions (vertical x horizont al) from the Image Divisions list. As the number of
divisions increases, the number of sheets used for printing  increases, allowing you to create a
larger poster.  
Print Cut/Paste in margins  
To leave out words Cut and Paste, uncheck this check bo x. 
Important 
This feature is unavailable when the 64-bit printer driver is used. 
Print Cut/Paste lines in margins  
To leave out cut lines, uncheck this check box.  
Pages  
To reprint only specific pages, enter the page numb er you want to print. To print multiple pages,
specify by separating the pages with commas or entering a  hyphen between the page numbers. 
Note 
You can also specify the print range by clicking the pages in the setup preview. 
5.Complete the setup  
Click OK on the Page Setup tab. 
W hen you execute print, the document will be divide d into several pages during printing.
After all poster pages have been printed, paste the  pages together to create a poster. 
Printing Only Specific Pages 
If ink becomes faint or runs out during printing, you can print the pages you still need, by following  the
procedure below: 
1.Set the print range  
In the Settings Preview on the left of the Page Setup  tab, click the pages that do not need to be
printed. 
The pages that were clicked are deleted, and only t he pages to be printed are displayed.  Стр/из	стр
!
!
  
						

							Note 
Click the deleted pages to display them again. 
Right-click the Settings Preview to select Print all pages or Delete all pages. 
2.Complete the setup  
After completing the page selection, click OK. 
W hen you execute print, only specified pages will b e printed. 
Important 
W hen Poster is selected, the Print from Last Page c heck box appears grayed out and is
unavailable. 
Since poster printing enlarges the document when printi ng it, the print results may become coarse. 
Page top
Стр	из	стр
!
!
  
						

							On-screen Manual > Various Printing Methods > Stamp/Background Printing 
Stamp/Background Printing 
This feature is unavailable when the 64-bit printer driver is used. 
The Stamp function allows you to print a stamp text  or a bitmap over or behind document data. It also
allows you to print date, time and user name. The B ackground function allows you to print a light
illustration behind the document data.  
The procedure for performing stamp/background printing  is as follows: 
Printing a Stamp 
CONFIDENTIAL, IMPORTANT, and other stamps that  are used often in companies are pre-registered.
1.Open the printer driver setup window
2.
Click Stamp/Background... on the Page Setup tab 
The Stamp/Background dialog box opens. 
3.Select a stamp  
Check the Stamp check box, and select a desired sta mp from the list.
The current settings are displayed in the Settings  Preview on the left side of the Page Setup tab.  Стр%из	стр
4!5p>?c8
,
!