Canon Fax Jx510p User Guide

							To delete a topic from List of My Manual, select that topic from the list, and then click Delete (or
press Delete).
Page top
Стриз	стр
3!
#pc!1

 
						

							On-screen Manual > How to Use This Manual > Symbols Used in this Document
Symbols Used in this Document
 Warning 
Instructions that, if ignored, could result in deat h or serious personal injury caused by incorrect op eration
of the equipment. These must be observed for safe o peration.
 Caution 
Instructions that, if ignored, could result in pers onal injury or material damage caused by incorrect
operation of the equipment. These must be observed  for safe operation.
 Important 
Instructions that must be observed for safe operati on.
 Note 
Instructions as notes for operation or additional explan ations.
Page top
Стриз	стр
4156,
!$7c5
!
  
						

							On-screen Manual > How to Use This Manual > Trademarks
Trademarks
Microsoft is a registered trademark of Microsoft Corporation.
W indows is a trademark or registered trademark of M icrosoft Corporation in the U.S. and/or other
countries.
W indows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
Adobe, Adobe RGB and Adobe RGB (1998) are either re gistered trademarks or trademarks of Adobe
Systems Incorporated in the United States and or ot her countries.
Exif Print
This machine supports Exif Print. 
Exif Print is a standard for enhancing the communication between digital cameras and printers. By
connecting to an Exif Print-compliant digital camer a, the cameras image data at the time of shooting  is
used and optimized, yielding extremely high quality  prints.
Page top
Стр%из	стр#,58
  
						

							MA-5134-V1.00
| Instructions for Use (Printer Driver) | How to Use This Manual | Printing This Manual |
Various Printing Methods
Printing with Easy Setup 
Setting a Page Size and Orientation 
Setting the Number of Copies and Printing
Order
Fit-to-Page Printing
Scaled Printing
Page Layout Printing
Poster Printing 
Stamp/Background Printing 
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)
Changing the Print Quality and Correcting
Image Data
Selecting a Combination of the Print Quality
Level and a Halftoning Method
Adjusting Brightness
Adjusting Intensity 
Adjusting Contrast
Simulating an Illustration 
Smoothing Jagged Outlines
Changing Color Properties to Improve
Coloration
Reducing Photo Noise
Changing Machine Settings from Your
Computer
Changing the Print Options
Saving a Changed Printing Profile 
Changing the Machine Operation Mode
Performing Maintenance from a Computer
Cleaning the Print Heads 
Cleaning the Paper Feed Rollers 
Aligning the Print Head Position 
Checking the Print Head Nozzles 
Cleaning Inside the Machine
Overview of the Printer Driver
Canon IJ Printer Driver 
How to Open the Printer Driver Setup W indow 
Maintenance Tab 
Canon IJ Status Monitor 
The Canon IJ Preview
Updating the Printer Driver
Obtaining the Latest Printer Driver 
Uninstalling the Printer Driver 
Before Installing the Printer Driver 
Installing the Printer Driver
Appendix
Deleting the Undesired Print Job 
Sharing the Printer on a Network Стр(из	стр
C
!
!
  
						

							On-screen Manual > Various Printing Methods 
Various Printing Methods
Printing with Easy Setup
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Fit-to-Page Printing
Scaled Printing
Page Layout Printing
Poster Printing
Stamp/Background Printing
Saving a Stamp Setting
Saving Image Data to be Used as a Background
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)
Page top
Стриз	стр
9
!
!$,
  
						

							On-screen Manual > Various Printing Methods > Printing with Easy Setup 
Printing with Easy Setup 
The procedure for setting the basic print setup, which is necessary to print data properly with this
machine, is as follows: 
1.Open the printer driver setup window
2.Select the print quality  
Select High, Standard, or Draft for Print Quality. 
3.Select color/intensity  
Select Auto for Color/Intensity. 
4.Check the settings  
Check the specified settings displayed in the Settings Preview on the left side of the window. 
5.Complete the setup  
Click OK. 
W hen you execute print, the document will be printe d in accordance with the size of the media. 
Page top
Стр-из	стр

!
 !$)14!p
     
						

							On-screen Manual > Various Printing Methods > Setting a Page Size and Orientation 
Setting a Page Size and Orientation 
The paper size and orientation are essentially determined by the application. If the page size and
orientation set for Page Size and Orientation on th e Page Setup tab are same as those set with the
application, you do not need to select them on the  Page Setup tab. 
If you are not able to specify them with the applic ation, the procedure for selecting a page size and
orientation is as follows: 
1.Open the printer driver setup window
2.
Select the paper size  
Select a page size from the Page Size list on the P age Setup tab. 
3.Select Orientation  
Select Portrait or Landscape for Orientation. Check  Rotate 180 degrees check box if you want to
perform printing with the original being rotated 18 0 degrees. 
4.Complete the setup  
Click OK. 
The document will be printed with the selected page  size and the orientation. 
Page top
Стр.из	стр
4!!
4:
,
!!
   
						

							On-screen Manual > Various Printing Methods > Setting the Number of Copies and Printing Order 
Setting the Number of Copies and Printing Order 
Default Setting Print from Last Page 
Collate 
Print from Last Page + Collate
The procedure for specifying the number of copies a
nd printing order is as follows: 
1.Open the printer driver setup window
2.
Specify the number of copies to be printed  
For Copies on the Page Setup tab, specify the numbe r of copies to be printed. 
3.Specify the print sequence  
Check the Print from Last Page check box if you want to  print from the last page in order. If you do
this, you do not need to sort pages into their corr ect order after printing. 
4.Set up collated printing when you specify multiple copi es in the Copies box 
Check the Collate check box if you are specifying m ultiple copy together.
Uncheck this check box to print all pages with the  same page number together.  Стр/из	стр
4!!
!$;56
						

							5.Complete the setup  
Click OK. 
The specified number of copies will be printed with the specified printing order. 
Important 
If the application software that you used to create the document has the same function, give priority
to the printer driver settings. However, if the pri nt results are not acceptable, specify the function
settings on the application software. If you specif y the number of copies and the printing order with
both the application and this printer driver, the n umber of copies may be multiplied numbers of the
two settings or the specified printing order may no t be enabled. 
Print from Last Page appears grayed out and is unav ailable if Poster is selected for Page Layout. 
Note 
By setting both Print from Last Page and Collate, you can perform printing so that papers are
collated one by one starting from the last page. 
These settings can be used in combination with Normal-size , Fit-to-Page, Scaled, and Page
Layout. 
Page top
Стр	из	стр
4!!
!$;56
						

							On-screen Manual > Various Printing Methods > Fit-to-Page Printing 
Fit-to-Page Printing 
The procedure for printing document, which is enlarged or reduced to fit to the page size, is as follows: 
1.Open the printer driver setup window
2.
Set fit-to-page printing  
Select Fit-to-Page from the Page Layout list on the  Page Setup tab. 
3.Select the paper size for the data  
Using Page Size, select the page size that was set  with your application. 
4.Select the print paper size  
Select the size of the paper loaded in the machine from the Printer Paper Size list.
If the printer paper size is smaller than the Page  Size, the page image will be reduced. If the printe r
paper size is larger than the page size, the page imag e will be enlarged. 
The current settings are displayed in the Settings  Preview on the left side of the printer driver.  Стриз	стр
2!!
!