Canon F792sga Owners Manual

49
61
    Calculate the Inner Product of Two VectorsExample: Calculate the inner product of Vector A and Vector B. As Vector A = (4,5,-6) and Vector B = (-7,8,9).
    Obtain the Scalar Product of a VectorEach position in the vector is multiplied by a single value, resulting in 
a vector of the same size.      
   s x VctA(a,b) = VctB(axs, bxs) 
Example: To Multiply Vector C = (4,5,-6) by 5 
Display
Key in operation
Display
Key in operationApps
Apps
Apps
Apps
Apps
Apps
Apps 

62
50
    Determine the Absolute Value of a Vector
Example 1: Determine the absolute value of the Vector C. When  
                     Vector C = (4,5,-6) and is already created in the calculator. 
    Calculate the Outer Product of Two Vectors
Example: Calculate the outer product of Vector A and Vector B. As Vector A = (4,5,-6) and Vector B = (-7,8,9).
!  An error occurs if you try to obtain an inner or outer product of two  vectors whose dimensions are different from each other. 
Abs
Display
Key in...

63
51
Example 2: Based on Vector A=(-1, 0, 1) and Vector B=(1, 2, 0), determine the size of the angle    (angle unit: Deg) and a 
unit 1 vector perpendicular to both A and B.
                          cos   =          , whereas   = cos 
-1 
            Unit 1 vector perpendicular to both A and B= 
  < Result:                   =(0.666666666, -0.333333333, 0.666666666) >
Display
Key in operation
AbsAbs
Abs
Apps
Apps
AppsAppsApps
AppsApps
AppsApps
AppsApps 

64
52
  Inequality Calculations
 
  Press                       (INEQ) to enter Inequality mode. Press        ,                           or         to select an inequality type.
     
  
  
  On the menu, press        ,        ,        or        to select the inequality  symbol type and orientation.
  Use the Coefficient Editor that appears to input coefficient values.
  To solve x
2 +2x -3 < 0, for example, input the coefficients a = 1, b 
= 2, c = -3, by pressing 1         2                3        ....

65
53
  Inequality Calculations
 
  Press                        (INEQ) to enter Inequality mode. Press        ,              
             or         to select an inequality type.
      
  
  
  On the menu, press        ,        ,        or        to select the inequality  symbol type and orientation.
  Use the Coefficient Editor that appears to input coefficient values.
  To solve x
2 +2x -3 < 0, for example, input the coefficients a = 1, b 
= 2, c = -3, by pressing 1         2                3...

66
54
Example: To calculate the ratio 2: 3 = 5: X
 The following operations are not supported by the Coefficient 
Editor.         ,                    ,                     ,       ,       ,       and 
  also cannot be input with the Coefficient Editor.
  [Math ERROR] will occur if a calculation is performed while 0 is  input as a coefficient.
Display
Key in operation
 
On the Coefficient Editor screen, input up to 10 digits for each of 
the required values (a, b, c, d).
 •  To solve 3:8=X:12 for X, for...

67
55
Start? Input the lower limit of X (Default =1).
End?  Input the upper limit of X (Default = 5).
  *End value must be greater than the start value.
Step?  Input the increment step (Default =1).
  Input f(x) function to generate the function table for x & f(x).
 Steps to Generate a Number Table
  1.  Press               to enter the Table function calculation.
  2.  Function Input screen
    •  Input function with X variable (              ) to generate the  Function Table Result.
    •  All other...

68
56
  In COMP mode, you can perform formula calculations using one of the 38 built-in universal formulas.
  Simply press              to enter formula calculation mode and  the formula selection menu will be shown promptly.
  Using Formula Calculation
  1.  Formula Selection and Display
    •  After entering the Formula Selection Menu, press     
      (or     ) for the next (last) formula page. Press          for 
      to display a formula.
    •  To instantly call for a specific formula before...

69
57
No.Name of Formula Formula Equation1.  Triangular area:   
2.  Circular area:   
3.  Fan-shaped area:   
4.  Area of parallelogram:
5.  Elliptical area:   
6.  Trapeziform area:   
7.  Spherical surface area:   
8.  Cylindrical surface area:   
9.  Spherical volume:   
10.  Cylindrical volume:   
11.  Conical volume:   
12.  Sum of arithmetic progression:   
13.  Sum of geometric progression:   
14.  Sum of square number:   
15.  Sum of cubic number:   
16.  Distance between arbitrary two points:...

70
58
Replace the battery immediately when the display 
characters are dim (even with a darker LCD display 
contrast) OR when the following message appears on the 
screen. Turn the calculator off and replace the lithium 
battery immediately.
Please replace the lithium battery with the following 
procedures:
1.  Press              to power off the calculator.
2.  Remove the screw that securely fixes the battery cover in place.
3.  Remove battery cover.
4.  Remove the old battery with the tip of a ball pen...