Canon Eos Rebel Xt 350d Instruction Manual

							
131
1Select the image to be printed.
¡Check that the < S> icon is displayed 
on the upper left of the LCD monitor.
¡ Press the < U> key to select the 
image to be printed.
2Press < 0>.
s The Print setting screen will appear.
3Select [Style].
¡Press the < V> key to select 
[ Style ], then press < 0>.
s The Style screen will appear.
S Direct Printing with Bubble Jet Direct
Printer-connected icon
Print setting screen
The printing style settings are displayed.
 is the date icon. Set the quantity to be printed.
Set the trimming area.
Set the printing style.
Returns to the screen in step 1.
Starts the printing.  
						

							
S Direct Printing with Bubble Jet Direct
132
4Set the options as desired.
¡ Press the < V> key to select the 
desired option, then press < 0>.
¡ Press the < V> key to select the 
desired setting, then press < 0>.
¡ [Paper ] is the size of the paper 
loaded in the printer.
¡ Check the [ Borders] and [Date]
settings and set them if necessary.
¡ When you are done, press the 
 button to return to the Print 
setting screen.
5Set the number of copies.
¡ Set as necessary.
¡ Press the < V> key to select 
[ copies ].
¡ Press the < U> key to set the 
desired quantity.
¡ Set a number from 1 to 99.
6Set the trimming.
¡Set as necessary.
¡ For details on trimming, see page 
134.
[Paper][Borders][Date]  
						

							
133
S Direct Printing with Bubble Jet Direct
7Start printing.
¡ Press the < V> key to select [ Print],
then press < 0>.
s The printing will start.
¡ When the printing ends, the screen 
will return to step 1.
¡ To stop the printing, press < 0> while 
[ Stop ] is displayed, then select [ OK]
and press < 0>.
If [Borders ] is set, the date might be imprinted on the border, depending on 
the printer.
¡ If [Date ] is [On], the date recorded for the image will appear on the print. 
The date will appear on the lower right of the image.
¡ If you select [ Stop] during the printing, the printing will stop and the 
paper will be discharged.
¡ If a problem occurs during printing, an error message will appear on the 
camera’s LCD monitor. Select [ Stop] or [Continue ]. If you select 
[ Continue ] and the printer does not resume printing, it will resume 
automatically after you resolve the problem.
¡ If you are using a BJ printer equipped with an operation display panel, 
the error No. will be displayed if an error occurs. To resolve the respective 
error, refer to the BJ printer’s instruction manual.  
						

							
134
You can crop the image and print only the cropped portion as if the 
image was recomposed.
Do the trimming right before printing. If you set the trimming and 
then set the print settings, you may have to set the trimming again.
1Select [Trimming].
¡Press the < V> key to select 
[ Trimming ], then press < 0>.
s The trimming screen will appear.
2Trim the image.
¡The image area within the trimming 
frame will be printed.
¡ The operation guide disappears while 
you trim the image. It will reappear 
after 5 sec. of idle time.
Changing the trimming frame size
¡ When you press the < u> or < I>
button, the size of the trimming frame 
will change. The smaller the trimming 
frame, the larger the image 
magnification will be.
Moving the trimming frame
¡ Press the < S> keys to move the 
trimming frame in the respective 
direction. Move the trimming frame 
until it shows the desired image area 
or composition.
Rotating the frame
¡ The < B> button toggles between 
the vertical and horizontal orientation 
of the trimming frame. For example, a 
horizontal shot can be printed as a 
vertical shot.
Setting the Trimming  
						

							
135
Setting the Trimming
3Exit the menu.
¡Press < 0>.
s The Print setting screen will reappear.
s On the upper left, you can see the 
trimmed image area that will be 
printed.
Image area to be printed
¡Depending on the printer, the trimmed image area might not be printed 
as you specified.
¡ The smaller you make the trimming frame, the grainier the picture will 
look. If the picture will be too grainy, the trimming frame will turn red.
¡ While trimming the image, look at the camera’s LCD monitor. If you look 
at the image on a TV screen, the trimming frame might not be displayed 
accurately.
The trimming frame shape will be different depending on the [ Paper
settings ], [Image ] / [Paper ], [Page layout ] / [Borders ] settings.  
						

							
136
When you print directly from your camera to your printer, the printing 
settings will be saved in your camera. To use the same settings again, 
follow the steps below.
1Connect the camera to a printer 
and prepare for printing.
2Playback the images and select 
the ones to be printed.
3Press the  button that lights 
in blue.
s The blue lamp will blink and printing 
will start.
Easy Printing
¡With Easy Printing, only one print can be printed each time.
¡ With Easy Printing, any cropping (trimming) will not be applied.  
						

							
137
9
DPOF: Digital PrintOrder Format
With DPOF (Digital Print Order Format), you can use 
the camera to specify which images in the CF card are 
to be printed and the quantity. This feature is very 
convenient when you make prints with a DPOF-
compatible printer or photo lab.
About DPOF
DPOF (Digital Print Order Format) is a standard for recording 
print ordering instructions to the CF card. It is for images taken 
with a digital camera, and you can specify which photos and 
the quantity to print. With a DPOF-compatible digital camera, 
you can do the following:
¡By inserting a CF card into a printer compatible 
with DPOF, you can make prints as specified.
¡ Printers capable of direct printing from 
the camera can print the images as 
specified by DPOF.
¡ When ordering prints from a photo lab, 
you do not need to fill in any order form 
to specify the image selections, 
quantity, etc.  
						

							
138
Set the print type, date imprinting, and file No. imprinting. The print 
settings will be applied to all print-ordered images. (They cannot be set 
individually for each image.)
1Select [Print order].
¡Select the [ x] tab.
¡ Press the < V> key to select [ Print
Order ], then press < 0>.
s The Print Order screen will appear.
2Select [Set up].
¡Press the < U> key to select [ Set
up ], then press < 0>.
s The Print setting screen will appear.
3Set the options as desired.
¡Set the [ Print type ], [Date ], and [ File
No. ].
¡ Press the < V> key to select the 
desired option, then press < 0>.
¡ Press the < V> key to select the 
desired setting, then press < 0>.
3Print Ordering
Print Settings
[Print type][Date][FileNo.]  
						

							
139
3 Print Ordering
4 Exit the menu.
¡Press the < 7> button.
s The Print Order screen will reappear.
¡ Next, select [ Order] or [All] to select 
the images to be printed.
Print Type Standard Prints one image on one sheet.IndexMultiple, thumbnail images are printed on 
one sheet.
BothPrints both the standard and index prints.
DateOn[ On ] imprints the recorded date on the print.Off
File No.On[On ] imprints the file No. on the print.Off
K
L
L K
¡ RAW images cannot be selected for printing.
¡ Even if [ Date] and [ File No. ] are set to [ On], the date or file No. might not 
be imprinted depending on the print type setting and printer type.
¡ With [ Index ] prints, both the [ Date] and [ File No. ] cannot be set to [ On]
at the same time.
¡ When printing with DPOF, you must use the CF card whose Print Order 
specifications have been set. It will not work if you just extract images 
from the CF card and try to print them.
¡ Certain DPOF-compatible printers and photo labs might not be able to 
print the photos as you specified. If this happens with your printer, refer 
to the printer’s instruction manual. Or check with your photo lab about 
compatibility when ordering prints.
¡ Do not insert into the camera a CF card whose print order specifications 
have already been set by a different camera and then try to set print 
order specifications. The print order may not work or may be overwritten. 
Also, depending on the image type, the print order may not be possible.  
						

							
3 Print Ordering
140
1Select [Order].
¡Press the < U> key to select 
[ Order ], then press < 0>.
s The Order screen will appear.
2Select the image to be printed.
¡Press the < U> key to select the 
image to be printed.
3Order the print.
¡ The print order will vary depending on 
the [ Print Type ] setting (p.138).
For [Standard] and [Both]
¡ For standard-type prints, you can set 
the quantity (up to 99) for each 
image.
¡ Press the < V> key to select the 
print quantity.
For [Index]
¡ If you want to include the image in the 
index print, checkmark < X> the box. 
Otherwise, leave the box unchecked.
¡ Pressing < V> toggles between 
checkmarking and uncheckmarking 
the box.
¡ If there are other images you want to 
select, repeat steps 2 and 3.
¡ You can select up to 998 images.
Selecting Individual Images for Printing