Canon Eos Rebel Xt 350d Instruction Manual

61
3 White Balance Auto Bracketing N
4Take the picture.
sIf B/A bracketing has been set, the 
three images will be recorded onto 
the CF card in the following 
sequence: Normal white balance, 
blue bias, and amber bias. If M/G 
bracketing has been set, the 
sequence will be normal white 
balance, magenta bias, and green 
bias.
¡ In step 3, set “ BKT” to “±0” (set “   ” 
to “ ”, 1 point).
Canceling White Balance Auto Bracketing
¡ If the image-recording quality is set to RAW or RAW+ 7L, white balance...

62
The color space refers to the range of reproducible colors. With this 
camera, you can set the color space for captured images to sRGB or 
Adobe RGB. For normal images, sRGB is recommended. In the Basic 
Zone modes, sRGB will be set automatically.
1Select [Color space].
¡Select the [ m] tab.
¡ Press the < V> key to select [ Color
space ], then press < 0>.
2Set the desired color space.
¡ Press the < V> key to select 
[ sRGB ] or [Adobe RGB ], then press 
< 0 >.
This is mainly used for commercial...

63
The image you capture can be processed internally by the camera to 
look more vivid and sharp or more subdued. The processing 
parameters can be set according to the preset Parameter 1 or 
Parameter 2 or to Set 1, 2, or 3 that you can set yourself. There is also a 
B/W parameter for black-and-white photos. In the Basic Zone modes, 
Parameter 1 will be set automatically.
1Select [Parameters].
¡Select the [ m] tab.
¡ Press the < V> key to select 
[ Parameters ], then press < 0>.
s Processing parameter...

64
The image you capture can be processed automatically by the camera in accordance with 
the parameter settings you set (five levels each for [Contrast], [Sharpness ], [Saturation ],
and [Color tone ]). You can register and save up to three sets of processing parameters.
1Select [Parameters].
¡Select the [ m] tab.
¡ Press the < V> key to select 
[ Parameters ], then press < 0>.
s The parameter setting screen will 
appear.
2Press < 0>.
3Select the set number.
¡ Press the < V> key to select [ Set 1],
[...

65
3 Setting the Processing Parameters N
When you capture images with the processing parameter set to B/W, the camera will process and record the images as black-and-white images onto the CF card.
1Select [B/W].
¡In step 3 on page 64, select [ B/W],
then press < 0>.
2Select the item to be set.
¡ Press the < V> key to select the 
desired setting, then press < 0>.
¡
The [ Contrast ] and [Sharpness ] will be the 
same as in the table in step 4 on page 64.
¡ For details on [ Filter effect] and 
[ Toning...

3 Setting the Processing Parameters N
66
The same effect as using filters with black-and-white film can be 
obtained with digital images. A color can be brightened by using a filter 
having a similar or same color. At the same time, the complementary 
colors will be darkened. 
v
When color toning is set, the selected color toning will be applied to t\
he 
black-and-white image before being recorded to the CF card. It can 
make the image look more impressive.
Select one of the following: [N:None]
[ S:Sepia...

67
The file number is like the frame number on film. There are two file 
numbering methods: [Continuous] and [Auto reset ]. The images you 
take are automatically assigned a file number from 0001 to 9999 and 
saved in a folder (created automatically) that can hold up to 100 images.
1Select [File numbering].
¡ Select the [ c] tab.
¡ Press the < V> key to select [ File
numbering ], then press < 0>.
2Select the file numbering method.
¡ Press the < V> key to select 
[ Continuous ] or [Auto reset ], then 
press <...

68
When folder No. 999 is created, [Folder number full] will appear on the 
LCD monitor. If file No. 9999 is created, “ Err CF” will be displayed on the 
LCD panel and in the viewfinder. Replace the CF card with a new one.
For both JPEG and RAW images, the file name will star t with “IMG_”. The 
extension will be “.JPG” for JPEG images and “.CR2” for RAW images.
When the camera is ready to shoot, press the < B> button to view the current camera settings on the LCD monitor.
Display the camera settings....

69
4
Setting the AF, Metering,and Drive Modes
The viewfinder has seven AF points. By 
selecting a suitable AF point, you can 
shoot with autofocus while framing the 
subject as desired. You can also set the 
AF mode to suit the subject or obtain 
the desired effect.
Evaluative, partial, and center-
weighted average metering modes 
are provided. Single, continuous, 
and self-timer drive modes are 
provided. Select the metering 
mode that suits the subject or your 
photographic intention.
¡The asterisk  M...

70
The AF mode is the autofocusing operation method. Three AF modes 
are provided. One-Shot AF is suited for still subjects, while AI Servo AF 
is for moving subjects. And AI Focus AF switches from One-Shot AF to 
AI Servo AF automatically if the still subject starts moving. In the Basic 
Zone modes, the optimum AF mode is set automatically.
1Set the lens focus mode switch to 
.
 (p.25)
2Press the  button.
s The [ AF mode ] menu will appear.
3Select the AF mode.
¡Press the < V> key to select the...