Canon Eos Rebel Xt 350d Instruction Manual

111
Image Playback
During the single image, image with shooting information, index, or magnified image display, you can jump forward or back to images stored on the CF card.
1Playback the image.
2Go to the jump display.
¡Press the < C> button.
s On the lower right of the screen, you 
can see the jump bar.
¡
During the single image or image with 
shooting information display, you can 
switch the jump method (10 images/100 
images/Date) by pressing the <
V> key.
3Jump forward or back.
¡ Press the < U> key....

Image Playback
112
You can playback the CF card’s images in an automatic slide show. Each image will be displayed for about 3 sec.
1Select [Auto play].
¡Select the [ x] tab.
¡ Press the < V> key to select [ Auto
play ], then press < 0>.
s The Autoplay screen will appear.
2Start the auto play.
sAfter [ Loading image... ] is displayed 
for a few seconds, auto play will start.
¡ To pause the auto play, press < 0>.
¡ During pause, [ ] will be displayed 
on the upper left of the image.Press 
 again to resume...

113
Image Playback
You can rotate an image by 90° or 270° clockwise. The image can then be displayed in the correct orientation during playback.
1Select [Rotate].
¡Select the [ x] tab.
¡ Press the < V> key to select 
[ Rotate ], then press < 0>.
s The Rotate screen will appear.
2Rotate the image.
¡Press the < U> key to select the 
image to be rotated, then press 
< 0 >.
s Each time you press < 0>, the image 
will rotate clockwise.
¡ To rotate another image, repeat step 
2.
¡ To exit the Rotate screen...

114
By connecting the camera to a TV set with the video cable (provided), 
you can view the captured images on a TV set. Always turn off the 
camera and the television before connecting or disconnecting them.
1Connect the camera to the TV.
¡Open the camera’s terminal cover.
¡ Use the video cable (provided) to 
connect the camera’s < D> terminal 
to the TV monitor’s VIDEO IN 
terminal.
¡ Insert the cable plug all the way in.
2Turn on the TV and switch the 
TV’s line input to Video IN.
3Turn the power...

115
This prevents the image from being erased accidentally.
1Select [Protect].
¡Select the [ x] tab.
¡ Press the < V> key to select 
[ Protect ], then press < 0>.
s The Protect screen will appear.
2Protect the image.
¡Press the < U> key to select the 
image to be protected, then press 
< 0 >.
s When an image is protected, the 
 icon will appear below the 
image.
¡ To cancel the image protection, press 
the < 0> button again. The < K>
icon will disappear.
¡ To protect another image, repeat step 
2.
¡ To...

116
You can erase images individually or erase all the images at one time in 
the CF card. Protected images (p.115) will not be erased.Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them.
1Playback the image.
¡Press the < x> button.
2Select the image to be erased.
¡Press the < U> key to select the 
image to be erased.
3Display the Erase menu.
¡ Press the < L> button.
s The...

117
L Erasing Images
1Playback the image.
¡ Press the < x> button.
2Display the Erase menu.
¡Press the < L> button.
s The Erase menu will appear at the 
bottom of the screen.
3Select [All].
¡Press the < U> key to select [ All],
then press < 0>.
s The confirmation dialog will appear.
4Erase the image.
¡Press the < U> key to select [ OK],
then press < 0>.
s All unprotected images will be 
erased.
¡ While the images are being erased, 
you can cancel the erasure by 
pressing < 0>.
Erasing All Images
After...

118
Format the CF card before using it in the camera.Formatting a CF card will erase everything in the card. It will 
also erase any protected images, so make sure the card has 
nothing you need to keep. If necessary, transfer the images to 
a personal computer before formatting the card.
1Select [Format].
¡Select the [ c] tab.
¡ Press the < V> key to select 
[ Format ], then press < 0>.
s The confirmation dialog will appear.
2Format the CF card.
¡Press the < U> key to select [ OK],
then press < 0>.
s...

119
8
Direct Printing
from the Camera
You can connect the camera directly to a printer and 
print out the images in the CF card. 
The camera enables direct printing with printers 
compatible with “< w> PictBridge”, Canon “< A> CP 
Direct”, and Canon “< S> Bubble Jet Direct.”  

120
This chapter includes procedures for various types of printers. After 
“Preparing to Print” on the next page, follow the instructions applicable 
to your printer on the pages indicated.
The Web site below gives more information about using your Canon 
camera with various printers such as which paper types to use.http://canon.com/pictbridge/
Conventions Used in this Chapter
Canon’s PictBridge Web Site
Compatible with 
Bubble Jet Direct onlyCompatible
with PictBridgeCompatible
with PictBridge...