Canon Eos Rebel T6i 750d Instruction Manual

							301
Viewing Images on a TV Set
Stereo AV Cable AVC-DC400ST (sold separately) is required.
1Connect the AV cable to the 
camera.
With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q > terminal.
2Connect the AV cable to the TV 
set.
Connect the AV cable to the TV set’s 
video IN terminal and audio IN 
terminals.
3Turn on the TV set and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the  button.
The image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
 To play back movies, see page 290.
Viewing on Non-HD TV Sets (Connected with AV Cable)
AUDIO
VIDEO
(Red)
(White)
(Yellow)
Do not use any AV cable other than the Stereo AV cable AVC-DC400ST 
(sold separately). Movies may not be di splayed if you use a different cable. 
						

							302
You can set protections to prevent the precious images from being erased accidentally.
1Select [Protect images].
Under the [3 1] tab, select [Protect 
images], then press < 0>.
2Select [Select images].
 Select [ Select images ], then press 
< 0 >.
 An image will be displayed.
3Protect the image.
 Press the < Y> < Z> keys to select 
the image to be protected, then press 
< 0 >.
 The image will be protected, and the 
 icon will appear at the top of 
the screen.
 To cancel the image protection, press 
 again. The < K> icon will 
disappear.
 To protect another image, repeat step 
3.
 To return to the menu, press the 
 button.
K Protecting Images
3  Protecting a Single Image
Image protect icon 
						

							303
K Protecting Images
You can protect all the images in a folder or on a card at once.
When you select [All images in folder] 
or [All images on card ] in [31: 
Protect images], all the images in the 
folder or on the card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in a Folder or on a Card
If you format the card  (p.59), the protected images will also be erased.
Movies can also be protected.
 Once an image is protected, it cannot  be erased by the camera’s erase 
function. To erase a protected image, you must first cancel the 
protection.
 If you erase all the images (p.305), only the protected images will 
remain. This is convenient when you  want to erase unnecessary images 
all at once. 
						

							304
You can either select and erase unnecessary images one by one or 
erase them in one batch. Protected images (p.302) will not be erased.Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a RAW+JPEG image will erase both the RAW 
and JPEG images.
1Play back the image to be erased.
2Press the  button.
The Erase menu will appear.
3Erase the image.
 Select [ Erase], then press < 0>. The 
image displayed will be erased.
By appending checkmarks < X> to the images to be erased, you can 
erase multiple images at once.
1Select [Erase images].
 Under the [3 1] tab, select [Erase 
images], then press < 0>.
L Erasing Images
Erasing a Single Image
3  Checkmarking  Images to Be Erased in a Batch 
						

							305
L Erasing Images
2Select [Select and erase images].
 Select [ Select and erase images ], 
then press < 0>.
 An image will be displayed.
3Select the images to be erased.
 Press the < Y> < Z> keys to select 
the image to be erased, then press 
< 0 >.
 A checkmark  will be displayed 
on the upper left of the screen.
 By pressing the < I> button, you 
can select images from a three-image 
display. To return to the single-image 
display, press the < u> button.
 To select other images to be erased, 
repeat step 3.
4Erase the image.
Press the < L> button.
 Select [ OK], then press < 0>.
 The selected images will be erased.
You can erase all the images in a folder or on a card at once. When 
[31: Erase images] is set to [ All images in folder] or [All images on 
card ], all the images in the folder or on the card will be erased.
3  Erasing All Images in a Folder or on a Card
To erase all images including protected images, format the card (p.59). 
						

							306
The information displayed varies depending on the shooting mode and settings.
Basic information display
B : Shooting Information Display
Sample Information for Still Photos
Folder number - 
File number
Rating
Playback number/ 
Total images 
recorded Protect images
Eye-Fi transfer completed
Battery level
Image-recording 
quality
ISO speed
Exposure compensation 
amount Wi-Fi function
Shutter speed Aperture
Wi-Fi/Eye-Fi card 
transmission status
Highlight tone priority 
						

							307
B: Shooting Information Display
Shooting information display 
•Detailed information
* When you shoot in [ 1+73 ] image quality, the  1 file size will be displayed.
* During flash photography without  flash exposure compensation,  will be 
displayed.
*< M > will be displayed for images shot with Multi Shot Noise Reduction.
* For still photos taken during movie shooting, < G> will be displayed.
* If a Creative filter or resizing is applied to the image and then saved, < u> will 
be displayed.
* For cropped images, < u> and  will be displayed.
Exposure compensation amount
Shutter speed
Shooting mode ISO speed
Shooting date and time
Image-recording quality
Histogram (Brightness/RGB)
White balance
White balance correction Highlight tone priority
Metering mode
Flash exposure compensation 
amount / 
Multi Shot Noise Reduction
Picture Style/Settings
Auto Lighting
Optimizer Scroll bar
Aperture
File size
If the image was taken by another camera, certain shooting information may 
not be displayed. 
						

							B: Shooting Information Display
308
•Lens/Histogram information
Histogram display 
(Brightness)
Lens name
Focal length Histogram display 
(RGB)
•
White balance information •Picture Style information
• Color space / Noise 
reduction information •
Lens aberration correction 
information
• GPS information
If GPS information was not recorded for the image, the GPS information 
screen will not be displayed.
Direction
Latitude
Elevation
Longitude
UTC (Coordinated Universal Time) 
						

							309
B: Shooting Information Display
* If manual exposure is used, the shut ter speed, aperture, and ISO speed (when 
set manually) will be displayed.
*The < t> icon will be displayed for video snapshots.
*The < c> icon will be displayed for Miniature effect movies.
 AF Point Display
When [32: AF point disp.] is set to [ Enable], the AF point that has 
achieved focus will be displayed in red. If automatic AF point 
selection is set, multiple AF points may be displayed.
Sample Movie Information Display
Shooting mode
Movie file size
Shutter speed
Compression method
Movie recording size
Shooting time, Playback time
Playback
Aperture
Frame rate 
						

							B: Shooting Information Display
310
Highlight Alert
When the shooting information is di splayed, any overexposed areas 
of the image will blink. To obtain more image detail in the 
overexposed, blinking areas, set the exposure compensation to a 
negative amount and shoot again.
 Histogram
The brightness histogram shows the exposure level distribution and 
overall brightness. The RGB hist ogram is for checking the color 
saturation and gradation. The display can be switched with [ x2: 
Histogram disp].
[Brightness] Display
This histogram is a graph showing the distribution 
of the image’s brightness level. The horizontal axis 
indicates the brightness level (darker on the left 
and brighter on the right), while the vertical axis 
indicates how many pixels exist for each 
brightness level. The more pixels there are toward 
the left, the darker the image. The more pixels 
there are toward the right, the brighter the image. 
If there are too many pixels on the left, the shadow 
detail will be lost. If there are too many pixels on 
the right, the highlight detail will be lost. The 
gradation in-betw een will be reproduced. By 
checking the image and its brightness histogram, 
you can see the exposure level inclination and the overall gradation.
[RGB] Display
This histogram is a graph showing the distribution of each primary 
color’s brightness level in the image (RGB or red, green, and blue). The 
horizontal axis indicates the color’s brightness level (darker on the left 
and brighter on the right), while the vertical axis indicates how many 
pixels exist for each color brightness level. The more pixels there are 
toward the left, the darker and less prominent the color. The more pixels 
there are toward the right, the brighter and denser the color. If there are 
too many pixels on the left, the respective color information will be 
lacking. If there are too many pixels on the right, the color will be too 
saturated with no gradation. By checking the image’s RGB histogram, 
you can see the color’s saturation and gradation condition, as well as 
white balance inclination.
Sample Histograms
Dark image
Normal brightness
Bright image