Canon Eos Rebel T6i 750d Instruction Manual

201
U Applying Creative Filters
5Adjust the filter effect.
 Press the < B> button (except for 
Miniature effect).
 Press the < Y> < Z> keys to adjust 
the filter effect, then press < 0>.
 For the Miniature effect, press < 0>, 
then press the   keys to 
move the white frame to where you 
want the image to look sharp.
6Take the picture.
 The image is shot with the filter 
applied.
Even if you set the drive mode to < i> or < q>, the camera will still shoot 
in single shooting mode.
 You cannot shoot...

U Applying Creative Filters
202
 VGrainy B/W
Creates a grainy black-and-white photo. You can change the black-
and-white effect by adjusting the contrast.
 WSoft focus
Gives the image a soft look. You can change the degree of softness 
by adjusting the blur.
 XFish-eye effect
Gives the effect of a fish-eye lens. The image will have a barrel-type 
distortion.
Depending on the level of this filter effect, the area trimmed along 
the periphery of the image changes. Al so, since this filter expands 
the...

203
U Applying Creative Filters
 bToy camera effect
Darkens the photo’s corners and applies a color tone that makes it 
look as if it was shot by a toy camera. You can change the color cast 
by adjusting the color tone.
 cMiniature effect
Creates a diorama effect. You can change where the image looks 
sharp. In step 5 on page 201, if you press the < u> button (or tap 
[T ] on the lower right of the screen), you can switch between the 
white frame’s vertical and horizontal orientations. The AF method...

204
The menu options displayed are as 
follows.
The settable functions on this menu 
screen apply only to Live View 
shooting. They do not work with 
viewfinder shooting (settings are 
disabled).
Live View shooting
You can set Live View shooting to [ Enable] or [Disable].
 AF method
You can select [ u+Tracking ], [FlexiZone - Multi ], or [FlexiZone - 
Single ]. See pages 206-213 for more about the AF method.
 Continuous AF
The default setting is [ Enable].
The camera focuses the subjec t continuously...

205
3 Menu Function Settings
Metering timer K
You can change how long the exposure setting is displayed (AE lock 
time). In Basic Zone modes, metering timer is fixed at 8 sec.
Selecting any of the following operations will stop Live View shooting. To 
start Live View shooting again, press the < A> button.
•[ z 3: Dust Delete Data], [ 53: Sensor cleaning ], [54: Clear settings ], 
or [ 54:  z firmware ver. ] 

206
You can select an AF method to suit the shooting conditions and your 
subject. The following AF methods are provided: [u(face)+Tracking ], 
[FlexiZone - Multi ] (p.208), and [FlexiZone - Single ] (p.210).
If you want to achieve precise focus,  set the lens focus mode switch to 
, magnify the image, and focus manually (p.216).
Select the AF method.
Under the [A ] tab, select [AF 
method ].
 Select the desired AF method, then 
press < 0>.
 While the Live View image is 
displayed, you can also press...

207
Using AF to Focus (AF Method)
You can also tap on the LCD monitor 
screen to select the face or subject. If 
the subject is not a face, < z> will be 
displayed.
 If no faces can be detected, or if you 
tap on the LCD monitor but do not 
select any face or subject, the 
camera will switch to [ FlexiZone - 
Multi ] with automatic selection 
(p.208).
3Focus on the subject.
 Press the shutter button halfway to 
focus.
 When focus is achieved, the AF point 
will turn green and the beeper will 
sound....

Using AF to Focus (AF Method)
208
You can use up to 49 AF points for wide-area focusing (automatic 
selection). This wide area can also be divided into 9 zones for focusing 
(zone selection).
1Display the Live View image.
Press the < A> button.
 The Live View image will appear on 
the LCD monitor.
2Select the AF point. J
Pressing < 0> or the < L> button will 
toggle between automatic selection 
and zone selection. In Basic Zone 
modes, automatic selection is set 
automatically.
 Use the < S> cross...

209
Using AF to Focus (AF Method)
3Focus on the subject.
Aim the AF point over the subject and 
press the shutter button halfway.
 When focus is achieved, the AF point 
will turn green and the beeper will 
sound.
 If focus is not achieved, the area 
frame will turn orange.
4Take the picture.
 Check the focus and exposure, then 
press the shutter button completely to 
take the picture (p.192).
 If the camera does not focus on the desired target subject with automatic 
AF point selection, select a...

Using AF to Focus (AF Method)
210
The camera focuses with a single AF point. This is effective when you 
want to focus on a particular subject.
1Display the Live View image.
Press the < A> button.
 The Live View image will appear on 
the LCD monitor.
 The AF point < > will appear.
 During movie shooting, if [Movie 
Servo AF ] is set to [ Enable], the AF 
point will be displayed in a larger size.
2Move the AF point.
Press the  cross keys to move the 
AF point to where you want to focus. (It 
cannot...