Canon Eos Rebel T6 1300d Instruction Manual

181
General Movie Shooting Cautions
Red  Internal Temperature Warning IconIf the camera’s internal temperature increases due to prolonged movie 
shooting or under a high ambient temperature, a red < E> icon will 
appear.
 The red < E> icon indicates that movie shooting will soon be terminated 
automatically. If this happens, you will not be able to shoot again until the 
camera’s internal temperature decreases. Turn off the power and let the 
camera rest for a while.
 Shooting a movie at a high...

182
General Movie Shooting Cautions
Recording and Image QualityIf you use a card with a slow  writing speed, a five-level 
indicator may appear on the right of the screen during movie 
shooting. It indicates how much data has not yet been 
written to the card (remaining capacity of the internal buffer 
memory). The slower the card, the faster the indicator will 
climb upward. If the indicator becomes full, movie shooting 
will stop automatically.
If the card has a fast writing speed, the indicator will...

183
7
Handy Features
Disabling the Beeper (p.184)
 Card Reminder (p.184)
 Setting the Image Review Time (p.184)
 Setting the Auto Power-off Time (p.185)
 Adjusting the LCD Monitor Brightness (p.185)
 Creating and Selecting a Folder (p.186)
 File Numbering Methods (p.188)
 Setting Copyright Information (p.190)
 Auto Rotation of Vertical Images (p.192)
 Checking Camera Settings (p.193)
 Reverting the Camera to the Default Settings (p.194) 
 Turning the LCD Monitor Off/On (p.197)
 Changing the...

184
You can prevent the beeper from sounding when focus is achieved or 
during self-timer operation.Under the [z1] tab, select [Beep ], then 
press < 0>. Select [ Disable], then press 
< 0 >.
This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [Release 
shutter without card ], then press . 
Select [ Disable], then press < 0>.
If there is no card inserted in the camera 
and you press the shutter button, “ Card” 
will be displayed in the viewfinder, and 
you cannot...

185
Handy Features
To save battery power, the camera turns off automatically after the set 
time of idle operation elapses. You can set this auto power-off time. 
When the camera has turned off due to auto power off, you can turn it 
on again by pressing the shutter button halfway or pressing any of the 
following buttons: < M>, , , < A>, etc.
If [Disable] is set, either turn off the camera or press the  
button to turn off the LCD monitor to save battery power.
Even when [Disable] is set, if the camera...

Handy Features
186
You can freely create and select the folder where the captured images 
are to be saved.
This operation is optional since a folder will be created automatically for 
saving captured images.
Creating a Folder
1Select [Select folder].
Under the [5 1] tab, select [ Select 
folder ], then press < 0>.
2Select [Create folder].
 Select [ Create folder ], then press 
< 0 >.
3Create a new folder.
 Select [ OK], then press < 0>.
 A new folder with the folder number 
increased by one is...

187
Handy Features
Selecting a Folder
With the folder selection screen 
displayed, select a folder and press 
.
 The folder where the captured 
images will be saved is selected.
 Subsequent captured images will be 
recorded into the selected folder.
Number of images in folder
Folder name
Lowest file number
Highest file number
FoldersAs with “ 100CANON” for example, the folder name starts with three digits 
(the folder number) followed by five  alphanumeric characters. A folder can 
contain up to 9999...

Handy Features
188
The image files will be numbered from 0001 to 9999 in the order the 
images are taken, then saved in a folder. You can change how the file 
number is assigned.
The file number will appear on your computer in this format: 
IMG_0001.JPG.
Under the [51] tab, select [ File 
numbering], then press < 0>. The 
available settings are described below. 
Select the option, then press < 0>.
 [Continuous]: The file numbering continues in sequence even 
after you replace the card or create a...

189
Handy Features
[Auto reset]: The file numbering restarts from 0001 each time 
the card is replaced or a new folder is created.
When you replace the card or cr eate a folder, the file numbering 
restarts from 0001 for the new images  saved. This is useful if you 
want to organize images by cards or folders.
If the replacement card or existi ng folder already contains images 
recorded previously, the file numbering of the new images may 
continue from the file numbering of the existing images on the...

Handy Features
190
When you set the copyright information, it will be appended to the 
image as Exif information.
1Select [Copyright information].
Under the [ 53] tab, select [ Copyright 
information ], then press < 0>.
2Select the option to be set.
 Select [ Enter author’s name ] or 
[Enter copyright details], then press 
< 0 >.
 The text entry screen will appear.
 Select [ Display copyright info. ] to 
check the copyright information 
currently set.
 Select [ Delete copyright 
information ] to...