Canon Eos Rebel T5i 700d Instruction Manual

91
3 Setting the Image-Recording Quality
1 is the raw image data before it is made into  73 or other images. 
Although  1 images require software such as Digital Photo 
Professional (provided, p.364) so that they can be displayed on the 
computer, they also offer flexibil ity for image adjustments possible only 
with 1. 1 is effective when you want  to precisely adjust the image 
yourself or shoot an important subject.
1 +73  records both a  1 and  73 image with a single shot. The 
two images are saved...

92
Set the ISO speed (image sensor’s sensitivity to light) to suit the 
ambient light level. In Basic Zone modes, the ISO speed is set 
automatically (p.93).
1Press the  button. (9)
X [ISO speed ] will appear.
2Set the ISO speed.
 Press the < U> key or turn the 
< 6 > dial to select the desired ISO 
speed, then press < 0>.
  You can also set the ISO speed in the 
viewfinder while turning the < 6> 
dial.
  With [ AUTO ] selected, the ISO speed 
will be set automatically (p.93).
ISO Speed Guide
* High ISO...

93
i: Changing the ISO Speed N
If the ISO speed is set to [AUTO], the 
actual ISO speed to be set will be 
displayed when you press the shutter 
button halfway. As indicated on the next 
page, the ISO speed will be set 
automatically to suit the shooting mode.
ISO [AUTO]
  When you shoot at high ISO speeds,  noise (such as dots of light and 
banding) may become noticeable.
  If you use a high ISO speed and fl ash to shoot a close subject, 
overexposure may result.
  With ISO 12800 or “ H” (equivalent to...

94
i: Changing the ISO Speed N
*1: Fixed at ISO 400 for bulb exposures.
*2: Depends on the maximum ISO speed limit set.
*3: If fill flash results in overexposure, ISO 100 or a higher ISO speed will be set.
*4: Except in the A, 6 , and F  modes.
*5: Automatically set within ISO 400 - ISO 1600 (or up to the maximum limit) in the  C , 2 , 3 , 4 , 5  and < d> modes if you use bounce flash with an external 
Speedlite.
For ISO Auto, you can set the maxi mum ISO speed limit within ISO 400 
- ISO 6400.
Under the...

95
By selecting a Picture Style, you can obtain image characteristics 
matching your photographic ex pression or the subject.
In Basic Zone modes, you cannot select the Picture Style.
1Press the  button.
X[Picture Style] will appear.
2Select a Picture Style.
  Press the < U> key or turn the 
< 6 > dial to select the desired 
Picture Style, then press < 0>.
D  Auto
The color tone will be adjusted to suit the scene. The colors will 
look vivid, especiall y for blue skies, greenery, and sunsets in 
nature,...

96
A Optimal Image Characteristics for the Subject N
R Landscape
For vivid blues and greens, and very sharp and crisp images. 
Effective for impressive landscapes.
S  Neutral
This Picture Style is for users who prefer to process images with 
their computer. For natural colors and subdued images.
U  Faithful
This Picture Style is for users who prefer to process images with 
their computer. When the subject is captured under a color 
temperature of 5200K, the color is adjusted colorimetrically to 
match...

97
You can select the AF (autofocus) operation characteristics suiting the 
shooting conditions or s ubject. In Basic Zone modes, the optimum AF 
operation is set automatically fo r the respective shooting mode.
1On the lens, set the focus mode 
switch to .
2Press the  button.
X[AF operation ] will appear.
3Select the AF operation.
 Press the < U> key or turn the 
< 6 > dial to select the desired AF 
operation, then press < 0>.
4Focus the subject.
  Aim the AF point over the subject and 
press the...

98
f: Changing the Autofocus Operation N
Suited for still subjects. When you press the shutter button 
halfway, the camera will focus only once.
 When focus is achieved, the dot in side the AF point achieving focus 
lights up briefly in red, and the focus confirmation light < o> in the 
viewfinder will also light up.
  With evaluative metering (p.117), the exposure setting will be set at 
the same time focus is achieved.
  While you hold down the shutter button halfway, the focus will be 
locked. You can...

99
f: Changing the Autofocus Operation N
AI Focus AF switches the AF operation from One-Shot AF to AI 
Servo AF automatically if a still subject starts moving.
 After the subject is focused in One- Shot AF operation, if the subject 
starts moving, the camera will detect the movement, change the AF 
operation automatically to AI Servo AF, and keep tracking the 
moving subject.
AI Focus AF for Automatic Switching of AF Operation
When focus is achieved with AI Focus  AF with the Servo operation active, 
the...

100
In Basic Zone modes, the camera will normally focus the closest subject 
automatically. Therefore, it may not  always focus your target subject.
In the < d>, < s>, < f >, and < a> modes, you can select the AF 
point and use it to focus the target subject.
1Press the  button. (9)
X The selected AF point will be 
displayed on the LCD monitor and in 
the viewfinder.
2Select the AF point.
  Use the < S> key to select the AF 
point.
  While looking at the viewfinder, you 
can select the AF point by...