Canon EOS Rebel T5 1200D User Guide

							311
IMPORTANT SAFETY INSTRUCTIONS
1.SAVE THESE INSTRUCTIONS — This manual contains important safety 
and operating instructions for Battery Charger LC-E10 & LC-E10E.
2. Before using the charger, read all instructions and cautionary remarks on 
(1) the charger, (2) the battery pack, and (3) the product using the battery 
pack.
3.CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E10. 
Other types of batteries may burst, causing personal injury and other 
damage.
4. Do not expose the charger to rain or snow.
5. Use of an attachment not recommended or sold by Canon may result in 
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric plug and cord, pull by plug rather than 
by cord when disconnecting charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or 
otherwise subjected to damage or stress.
8. Do not operate the charger with damaged cord or plug - replace them 
immediately.
9. Do not operate the charger if it has received a sharp blow, been dropped, 
or otherwise damaged in any way; take it to a qualified serviceman.
10. Do not disassemble the charger; take it to a qualified serviceman when 
service or repair is required. Incorrect reassembly may result in a risk of 
electric shock or fire.
11. To reduce risk of electric shock, unplug charger from outlet before 
attempting any maintenance or cleaning.
MAINTENANCE INSTRUCTION
Unless otherwise stated in this manual, there are no user serviceable parts 
inside. Refer servicing to qualified serviceman.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is 
recyclable. Please call 1-800-8-BATTERY for information on 
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may 
apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. 
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION. 
						

							312
MEMO 
						

							
313
13
Viewing the CD-ROM Instruction Manuals /Downloading Images to Your Computer
This chapter explains how to view the Camera 
Instruction Manual CD-ROM on your computer, 
download images from the camera to your computer, 
gives an overview of the software in the EOS DIGITAL 
Solution Disk (CD-ROM), and explains how to install the 
software on your computer. It also explains how to view 
the software instruction manuals.
EOS DIGITAL Solution Disk
(Software/Software Instruction Manuals)
Camera Instruction 
Manual 
						

							
314
The Camera Instruction Manual CD-ROM contains the 
following instruction manuals (PDF):
  Camera Instruction Manual
The manual you are reading now. Explains all of the camera’s 
functions and operation procedur es, including basic content.
  Quick Reference Guide
Explains basic camera functi ons and procedures for shooting and 
playback.
To view the instruction manuals (PDF files), Adobe Reader 6.0 or higher 
must be installed in your computer. Adobe Reader can be downloaded 
free from the Internet. After installing Adobe Reader, follow the 
procedure below.
1Insert the “CAMERA INSTRUCTION 
MANUAL” CD-ROM into your computer.
2Double-click the CD-ROM icon.
  For Windows, the icon is displayed in [ (My) 
Computer ].
  For Macintosh, the icon is displayed on the 
desktop.
  The icon displayed will differ depending on your 
computer’s operating system.
Viewing the Camera Instruction Manual CD-ROM
Viewing the Camera  Instruction Manual on the CD-ROM 
						

							
315
Viewing the Camera Instruction Manual CD-ROM
3Double-click the START file.
XThe screen shown in step 4 will appear.
  The icon displayed will differ depending on your 
computer’s operating system.
4Click on the manual you want to view.
 Click on the name of the manual under your 
respective language.
X The manual will be displayed.
 §Ýå–;
†Ì	{ « ¿«¨ ÅÔŠ  –;
†Ì	{EnglishINSTRUCTION MANUAL Camera Instruction Manual
 Quick Reference GuideFrançaisMODE D’EMPLOI Mode d’emploi de l’appareil photo
 Guide de référence rapide
						

							
316
You can use the EOS software to download the images in the camera to your computer. There are two ways to do this.
1Install the software (p.320).
2Use the provided interface cable 
to connect the camera to your 
computer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
digital terminal with the cable plug’s 
 icon facing the front of the 
camera.
  Connect the cord’s plug to the 
computer’s USB terminal.
3Use EOS Utility to download the 
images.
 For details, refer to the EOS Utility 
Instruction Manual (p.321).
Downloading Images to a Computer
Downloading by Connecting the Camera to the Computer 
						

							
317
Downloading Images to a Computer
You can also use a card reader to download images to your computer.
1Install the software (p.320).
2Insert the card into the card 
reader.
3Use Canon software to download 
the images.
XUse Digital Photo Professional.
X Use ImageBrowser EX.
  For details, refer to the Software 
Instruction Manual (p.321).
Downloading Images with a Card Reader
When downloading images from the camera to your computer using a card 
reader without using EOS software, copy the DCIM folder on the card to 
your computer. 
						

							
318EOS DIGITAL Solution Disk
Various software for EOS DIGITAL cameras are contained 
on the EOS DIGITAL Solution Disk.
With the camera connected to a computer, EOS Utility enables you to 
transfer still photos and movies shot with the camera to the computer. 
You can use this software to set various camera settings and shoot 
remotely with the computer connected to the camera. Also, you can 
copy background music tracks, such  as EOS Sample Music*, to the 
card.
* You can use the background music as the soundtrack for a video snapshot  album, movie, or slide show played back with your camera.
This software is recommended fo r users who mainly shoot RAW 
images. You can quickly view, edit,  process and print RAW images. You 
can also edit JPEG images while  retaining the original images.
You can edit Picture Styles and create  and save original Picture Style 
files. This software is aimed at  advanced users who are experienced in 
processing images.
Software Overview
EOS Utility
Digital Photo Professional
Picture Style Editor 
						

							319
Software Overview
Connect to the Internet to download and install the software*.
This software is recommended for users who mainly shoot JPEG 
images. You can easily view and play back still photos, MOV movies, 
and video snapshot albums and also print JPEG images.
* EOS DIGITAL Solution Disk is necessary for downloading and installing 
ImageBrowser EX.
ImageBrowser EX
Note that the software ZoomBrowser EX/ImageBrowser provided with 
previous cameras does not support still photos and movie files shot with this 
camera (it is not compatible). Use ImageBrowser EX. 
						

							
320
1Insert the EOS DIGITAL Solution Disk into your 
computer.
 For Macintosh, double-click to  open the CD-ROM icon displayed 
on the desktop, then double-click on [ setup].
2Click [Easy Installation] and follow the on-screen 
instructions to install.
 If the “Microsoft Silverlight” instal lation prompt is displayed during 
installation, install “Microsoft Silverlight”.
3Click [Restart] and remove the CD-ROM after the 
computer restarts.
  When the computer has restarted, the installation is complete.
Installing the Software
  Do not connect the camera to your computer before you install the 
software. The software will not be installed correctly.
  When downloading and installing ImageBrowser EX, follow the steps 
below as with other EOS software included on the EOS DIGITAL 
Solution Disk. Note that Internet connection is necessary. Downloading 
or installing software is not possible in environments with no Internet 
connection.
  Even if your computer already has ImageBrowser EX installed, follow the 
steps below to reinstall ImageBrowser  EX. It will be updated to the latest 
version with features optimized for your camera. Also, the latest 
functions may be added with the auto update feature.
  For software other than ImageBrowse r EX, if a previous version is 
installed, follow the steps below to reinstall the software. (The newer 
version will overwrite the previous version.)