Canon Eos Rebel T3 1100d Instruction Manual
Here you can view all the pages of manual Canon Eos Rebel T3 1100d Instruction Manual. The Canon manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 151
151 Movie Shooting Cautions Playback and TV connection If the brightness change s during movie shooting, that part might look momentarily still when you playback the movie. If you connect the camera to a TV set with an HDMI cable (p.191) and shoot a movie, the movie being shot wi ll be displayed at a small size on the TV. But the movie will still be properly recorded in High-Definition (HD) quality. If you connect the camera to a TV set and shoot a movie, the TV will not output any sound...
Page 152
152 COPY
Page 153
153 Handy Features Silencing the Beeper (p.154) Card Reminder (p.154) Setting the Image Review Time (p.154) Setting the Auto Power-off Time (p.155) Adjusting the LCD Monitor Brightness (p.155) Creating and Selectin g a Folder (p.156) File Numbering Methods (p.158) Setting Copyright Information (p.160) Auto Rotation of Vertical Images (p.162) Checking Camera Settings (p.163) Reverting the Camera to the Default Settings (p.164) Turning the LCD Monitor Off/On (p.166) Changing the...
Page 154
![Page 154
154
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.Under the [1] tab, select [Beep ], then
press < 0>. Select [ Disable], then
press < 0>.
This prevents shooting if there is no card in the camera. Under the [1] tab, select [Release
shutter without card ], then press
< 0 >. Select [Disable], then press
< 0 >.
If there is no card in stalled and you press
the shutter button, “ Card” will be
displayed in the viewfinder, and you
cannot release the...](http://img.usermanuals.tech/thumb/14/58887/w300_eos-rebel-t3-1100d-instruction-manual-153.png "Page 154
154
You can prevent the beeper from sounding when focus is achieved or
during self-timer operation.Under the [1] tab, select [Beep ], then
press < 0>. Select [ Disable], then
press < 0>.
This prevents shooting if there is no card in the camera. Under the [1] tab, select [Release
shutter without card ], then press
< 0 >. Select [Disable], then press
< 0 >.
If there is no card in stalled and you press
the shutter button, “ Card” will be
displayed in the viewfinder, and you
cannot release the...")
154 You can prevent the beeper from sounding when focus is achieved or during self-timer operation.Under the [1] tab, select [Beep ], then press < 0>. Select [ Disable], then press < 0>. This prevents shooting if there is no card in the camera. Under the [1] tab, select [Release shutter without card ], then press < 0 >. Select [Disable], then press < 0 >. If there is no card in stalled and you press the shutter button, “ Card” will be displayed in the viewfinder, and you cannot release the...
Page 155
![Page 155
155
Handy Features
To save battery power, the camera turns off automatically after the set
time of idle operation elapses. Y ou can set this auto power-off time.
When the camera has turned off due to auto power off, you can wake it
up by pressing the shutter button halfway or pressing any of the
following buttons: < M>, , < A>, etc.
If [Off] has been set, either turn off the camera yourself or press
the < B> button to turn off the LCD monitor to save battery
power.
Even if [Off] has been set and...](http://img.usermanuals.tech/thumb/14/58887/w300_eos-rebel-t3-1100d-instruction-manual-154.png "Page 155
155
Handy Features
To save battery power, the camera turns off automatically after the set
time of idle operation elapses. Y ou can set this auto power-off time.
When the camera has turned off due to auto power off, you can wake it
up by pressing the shutter button halfway or pressing any of the
following buttons: < M>, , < A>, etc.
If [Off] has been set, either turn off the camera yourself or press
the < B> button to turn off the LCD monitor to save battery
power.
Even if [Off] has been set and...")
155 Handy Features To save battery power, the camera turns off automatically after the set time of idle operation elapses. Y ou can set this auto power-off time. When the camera has turned off due to auto power off, you can wake it up by pressing the shutter button halfway or pressing any of the following buttons: < M>, , < A>, etc. If [Off] has been set, either turn off the camera yourself or press the < B> button to turn off the LCD monitor to save battery power. Even if [Off] has been set and...
Page 156
![Page 156
Handy Features
156
You can freely create and select the folder where the captured images
are to be saved.
This is optional since a folder will be created automatically for saving\
captured images.
Create a Folder
1Select [Select folder].
Under the [ 5] tab, select [ Select
folder ], then press < 0>.
2Select [Create folder].
Select [Create folder ], then press
< 0 >.
3Create a new folder.
Select [OK ], then press < 0>.
XA new folder with a higher one-up
folder number is created.
3 Creating...](http://img.usermanuals.tech/thumb/14/58887/w300_eos-rebel-t3-1100d-instruction-manual-155.png "Page 156
Handy Features
156
You can freely create and select the folder where the captured images
are to be saved.
This is optional since a folder will be created automatically for saving\
captured images.
Create a Folder
1Select [Select folder].
Under the [ 5] tab, select [ Select
folder ], then press < 0>.
2Select [Create folder].
Select [Create folder ], then press
< 0 >.
3Create a new folder.
Select [OK ], then press < 0>.
XA new folder with a higher one-up
folder number is created.
3 Creating...")
Handy Features 156 You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving\ captured images. Create a Folder 1Select [Select folder]. Under the [ 5] tab, select [ Select folder ], then press < 0>. 2Select [Create folder]. Select [Create folder ], then press < 0 >. 3Create a new folder. Select [OK ], then press < 0>. XA new folder with a higher one-up folder number is created. 3 Creating...
Page 157
157 Handy Features Selecting a Folder With the folder selection screen displayed, select a folder and press . XThe folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder. Number of images in folder Folder name Lowest file number Highest file number About FoldersAs with “ 100CANON ” for example, the folder name starts with three digits (folder number) followed by five alphan umeric characters. A folder can contain up to...
Page 158
![Page 158
Handy Features
158
The image files will be numbered from 0001 to 9999 in the order the
images are taken, then saved in a folder. You can change how the file
number is assigned.
The file number will appear on y our computer in this format:
IMG_0001.JPG .
Under the [5] tab, select [ File
numbering ], then press < 0>. The
available settings are described below.
Select one, then press < 0>.
[Continuous]: The file numbering continues in sequence even
after you replace the card or create a folder....](http://img.usermanuals.tech/thumb/14/58887/w300_eos-rebel-t3-1100d-instruction-manual-157.png "Page 158
Handy Features
158
The image files will be numbered from 0001 to 9999 in the order the
images are taken, then saved in a folder. You can change how the file
number is assigned.
The file number will appear on y our computer in this format:
IMG_0001.JPG .
Under the [5] tab, select [ File
numbering ], then press < 0>. The
available settings are described below.
Select one, then press < 0>.
[Continuous]: The file numbering continues in sequence even
after you replace the card or create a folder....")
Handy Features 158 The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on y our computer in this format: IMG_0001.JPG . Under the [5] tab, select [ File numbering ], then press < 0>. The available settings are described below. Select one, then press < 0>. [Continuous]: The file numbering continues in sequence even after you replace the card or create a folder....
Page 159
![Page 159
159
Handy Features
[Auto reset]: The file numbering is reset to 0001 whenever you
replace the card or create a folder.
Whenever the card is replaced or a new folder created, the file
numbering starts from 0001. This is convenient if you want to
organize images according to cards or folders.
If the replacement card or existi ng folder already contains images
recorded previously, the file num bering of the new images might
continue from the file numbering of the existing images in the card or...](http://img.usermanuals.tech/thumb/14/58887/w300_eos-rebel-t3-1100d-instruction-manual-158.png "Page 159
159
Handy Features
[Auto reset]: The file numbering is reset to 0001 whenever you
replace the card or create a folder.
Whenever the card is replaced or a new folder created, the file
numbering starts from 0001. This is convenient if you want to
organize images according to cards or folders.
If the replacement card or existi ng folder already contains images
recorded previously, the file num bering of the new images might
continue from the file numbering of the existing images in the card or...")
159 Handy Features [Auto reset]: The file numbering is reset to 0001 whenever you replace the card or create a folder. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders. If the replacement card or existi ng folder already contains images recorded previously, the file num bering of the new images might continue from the file numbering of the existing images in the card or...
Page 160
![Page 160
Handy Features
160
When you set the copyright information, it will be appended to the image as Exif information.
1Select [Copyright information].
Under the [ 7] tab, select [Copyright
information ], then press < 0>.
2Select the option to be set.
Select [Enter author’s name ] or
[Enter copyright details ], then press
< 0 >.
XThe text entry screen will appear.
Select [Display copyright info. ] to
check the copyright information
currently set.
Select [Delete copyright
information ] to delete...](http://img.usermanuals.tech/thumb/14/58887/w300_eos-rebel-t3-1100d-instruction-manual-159.png "Page 160
Handy Features
160
When you set the copyright information, it will be appended to the image as Exif information.
1Select [Copyright information].
Under the [ 7] tab, select [Copyright
information ], then press < 0>.
2Select the option to be set.
Select [Enter author’s name ] or
[Enter copyright details ], then press
< 0 >.
XThe text entry screen will appear.
Select [Display copyright info. ] to
check the copyright information
currently set.
Select [Delete copyright
information ] to delete...")
Handy Features 160 When you set the copyright information, it will be appended to the image as Exif information. 1Select [Copyright information]. Under the [ 7] tab, select [Copyright information ], then press < 0>. 2Select the option to be set. Select [Enter author’s name ] or [Enter copyright details ], then press < 0 >. XThe text entry screen will appear. Select [Display copyright info. ] to check the copyright information currently set. Select [Delete copyright information ] to delete...