Canon Eos Rebel Sl1 100d Instruction Manual

21
Handling Precautions
LCD Monitor Although the LCD monito r is manufactured with very high precision 
technology with over 99.99% effective  pixels, there may be a few dead pixels 
displaying only black or red, etc. among the remaining 0.01% or less pixels. 
Dead pixels are not a malfunction. Th ey do not affect the images recorded.
  If the LCD monitor is left  on for a prolonged period,  screen burn-in may occur 
where you see remnants of  what was displayed. However, this is only 
temporary and will...

22
Nomenclature
Built-in flash/AF-assist beam
(p.111/106)EF Lens mount index (p.40)
Power switch (p.35) Mode Dial (p.26)
 ISO speed
setting button (p.98)  Main Dial
Shutter button
(p.43) EF-S Lens mount index (p.40)
Strap mount
(p.29)

Audio/video OUT/
Digital terminal (p.265, 282, 364)
Body cap (p.40) Lens release button
(p.41)
Grip
Contacts (p.21) Red-eye
reduction/
Self-timer 
lamp 
(p.112/110)
Mirror (p.147, 239)
Remote control
sensor
(p.147, 309) Hot shoe (p.311)
Flash sync contacts
Microphone...

23
Nomenclature
Display-off sensor (p.50, 230)Dioptric adjustment knob (p.42)
Card slot/
Battery compartment
cover (p.32)Access lamp 
(p.33)
Card slot/
Battery compartment
cover release lever (p.32)
Viewfinder eyepiece
Eyecup (p.310)  Live View shooting/
Movie shooting button (p.150/182)
 AE lock/
FE lock button/
Index/Reduce button
(p.127/128/242/244, 279, 289)

AF point selection/
Magnify button
(p.105/244, 279, 289)
DC cord hole
(p.308)
 Info button
(p.50, 89, 152, 187, 226)
 Menu
button (p.46)
LCD...

Nomenclature
24
Shooting Settings (in Creative Zone modes, p.26)
The display will show only th e settings currently applied.
Shutter speed
Shooting mode Aperture
ISO speed (p.98)
Self-timer countdown Number of possible shots
Battery check (p.36)
zxcn
Quick Control icon (p.44)
Exposure level indicator
Exposure compensation
amount (p.123)
AEB range (p.125)
White balance (p.142)
 Q Auto
 W  Daylight
E Shade
R Cloudy
 Y Tungsten light
 U   White fluorescent light
 I  Flash
 O  Custom Image-recording 
quality...

25
Nomenclature
Viewfinder Information
The display will show only the settings currently applied.
AF point activation indicator < >
AF points
  Flash-ready  
 Improper FE lock warning Max. burst
 
Focus
 confirmation light
 High-speed sync
 (FP flash)
 FE  lock/FEB  in-progress
 Flash exposure
 compensation
Card full warning (FuLL)
Card error warning ( Card)
No card warning (Card) Exposure level indicator
  Exposure compensation amount
 AEB range
Red-eye reduction lamp-on indicator
 Highlight tone...

Nomenclature
26
Mode Dial
The Mode Dial includes the Basic Zone modes and Creative Zone 
modes.
Basic Zone
All you do is press the shutter button. 
The camera sets everything to suit the 
subject or scene.
A : Scene Intelligent Auto  (p.58)
7 : Flash Off  (p.63)
C : Creative Auto  (p.64)
2 : Portrait (p.68)
3 : Landscape  (p.69)
4 : Close-up (p.70)
5 : Sports  (p.71)
8 : Special scene  (p.72)
C : Kids (p.73)
P : Food (p.74)
x : Candlelight (p.75)
6 : Night Portrait (p.76)
F : Handheld Night Scene (p.77)...

27
Nomenclature
Battery Charger LC-E12
Charger for Battery Pack LP-E12 (p.30).
Battery Charger LC-E12E
Charger for Battery Pack LP-E12 (p.30).
Battery pack slot
Power plug
Charge lampFull-charge lamp
IMPORTANT SAFETY INSTRUCTIO NS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 
CAREFULLY FOLLOW  THESE INSTRUCTIONS.
For connection to a supply  not in the U.S.A., use an attachment plug adapter 
of the proper configuration fo r the power outlet, if needed.
Power cord 
Power...

COPY  

29
Getting Started
This chapter explains preparatory steps before you start 
shooting and basic camera operations.
Attaching the Strap
Pass the end of the strap through 
the camera’s strap mount eyelet 
from the bottom. Then pass it 
through the strap’s buckle as shown 
in the illustration. Pull the strap to 
take up any slack and make sure 
the strap will not loosen from the 
buckle.
 The eyepiece cover is also 
attached to the strap (p.310).
Eyepiece cover
COPY  

30
1Remove the protective cover.
2Attach the battery.
 As shown in the illustration, attach the 
battery securely to the charger.
  To detach the battery, follow the 
above procedure in reverse.
3Recharge the battery.
For LC-E12
 As shown by the arrow, flip out the 
battery charger’s prongs and insert 
the prongs into a power outlet.
For LC-E12E
 Connect the power cord to the 
charger and insert the plug into a 
power outlet. 
X Recharging starts automatically and 
the charge lamp lights up in orange.
X...