Home > Canon > Digital Camera > Canon Eos Rebel Sl1 100d Instruction Manual

Canon Eos Rebel Sl1 100d Instruction Manual

Here you can view all the pages of manual Canon Eos Rebel Sl1 100d Instruction Manual. The Canon manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.

Page 211

211
3 Menu Function Settings
 Video snapshots
You can shoot video snapshots.  For details, see page 197.
 In Basic Zone modes, th e settings available for [Sound recording] will 
be [ On/Off ]. If [On] is set, the sound- recording level will be adjusted 
automatically (same as with [ Auto]). However, the wind fi lter function will 
not take effect.
  The sound volume balance between L  (left) and R (right) cannot be 
adjusted.
  Both L and R record audio at a  48 kHz/16-bit sampling rate.
COPY  

Page 212

3 Menu Function Settings
212
Movie Shooting Cautions
White < s> and Red < E> Internal Temperature Warning Icons
  If the camera’s internal temperatu re increases due to prolonged movie 
shooting or under a high am bient temperature, a white  or red < E> 
icon will appear.
  The white < s> icon indicates that the image  quality of still photos will 
deteriorate. You should stop still sh ooting and allow the camera’s internal 
temperature to cool before shooting again. Since movie image quality 
will...

Page 213

213
Movie Shooting Cautions
Recording and Image Quality
 If you use a card with a slow  writing speed, a five-level 
indicator may appear on the right of the screen during movie 
shooting. It indicates how  much data has not yet been 
written to the card (remaining ca pacity of the internal buffer 
memory). The slower the card, the faster the indicator will 
climb upward. If the indicator  becomes full, movie shooting 
will stop automatically.
If the card has a fast writing sp eed, the indicator will...

Page 214

COPY  

Page 215

215
Handy Features
 Disabling the Beeper (p.216)
  Card Reminder (p.216)
  Setting the Image Review Time (p.217)
  Setting the Auto Power-off Time (p.217)
  Adjusting the LCD Monitor Brightness (p.218)
  Creating and Selectin g a Folder (p.219)
  File Numbering Methods (p.221)
  Setting Copyright Information (p.223)
  Auto Rotation of Vertical Images (p.225)
  Checking Camera Settings (p.226)
  Reverting the Camera to the Default Settings (p.227)
  Preventing the LCD Monitor from  Turning Off...

Page 216

216
You can prevent the beeper from sounding when focus is achieved, 
during self-timer operation, and during touch screen operations.
Under the [z1] tab, select [ Beep], then 
press < 0>. Select [ Disable], then 
press < 0>.
To silence the beeper only during touch 
screen operations, select [ Touch to ].
This setting prevents shooting if there is no card in the camera. Under the [z1] tab, select [ Release 
shutter without card ], then press 
< 0 >. Select [Disable], then press 
< 0 >.
If there is no...

Page 217

217
Handy Features
You can set how long the image is displayed on the LCD monitor 
immediately after capture. If [ Off] is set, the image will not be displayed 
immediately after image capture. If [Hold ] is set, the image review will 
be displayed up until the [ Auto power off] time.
During image review, if you operat e any camera controls such as 
pressing the shutter button halfwa y, the image review will end.
Under the [ z1] tab, select [ Image 
review ], then press < 0>. Select the 
desired setting,...

Page 218

Handy Features
218
You can adjust the brightness of the LCD monitor to make it easier to 
read.
Under the [52] tab, select [LCD 
brightness], then press < 0>. Press 
the < Y> keys to adjust the 
brightness on the adjustment screen, 
then press < 0>.
When checking the exposure of an 
image, set the LCD monitor brightness to 
4 and prevent the ambient light from 
affecting the reviewed image.
3  Adjusting the LCD Monitor Brightness
COPY  

Page 219

219
Handy Features
You can freely create and select the folder where the captured images 
are to be saved.
This operation is optional since a fo lder will be created automatically for 
saving captured images.
Creating a Folder
1Select [Select folder].
 Under the [ 51] tab, select [Select 
folder ], then press < 0>.
2Select [Create folder].
 Select [Create folder ], then press 
< 0 >.
3Create a new folder.
 Select [OK ], then press < 0>.
X A new folder with the folder number 
increased by one is created....

Page 220

Handy Features
220
Selecting a Folder
 With the folder selection screen 
displayed, select a folder and press 
.
X The folder where the captured 
images will be saved is selected.
  Subsequent captured images will be 
recorded into the selected folder.
Number of images in folder
Folder name
Lowest file number
Highest file number
FoldersAs with “ 100CANON ” for example, the folder name  starts with three digits 
(the folder number) followed by five  alphanumeric characters. A folder can 
contain up to...
Start reading Canon Eos Rebel Sl1 100d Instruction Manual

Related Manuals for Canon Eos Rebel Sl1 100d Instruction Manual

All Canon manuals