Canon EOS 60D Instruction Manual

							201
Q Quick Control During Playback
To rotate an image, set the [ 5 Auto rotate ] menu to [On zD ]. If it is set to 
any other setting, the image will not rotate.
  If you shoot in RAW+JPEG image  quality, the RAW image will be 
displayed.
  Pressing the < Q> button during the index di splay will switch to the 
single-image display and the Quick Control screen  will appear. Pressing 
the < Q> button again will return to the index display.
  Regarding images not take n with the EOS 60D, selectable functions may 
be limited.
COPY  
						

							202
Basically, you can playback movies in the following three ways:
Use the provided AV cable or an HDMI 
Cable HTC-100 (sold separately) to 
connect the camera to a TV set. Then 
you can playback the captured movies 
and photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full HD (Full High-
Definition: 1920x1080) and HD (High-
Definition: 1280x720) movies with higher 
image quality.
k  Enjoying Movies
Playback on a TV set(p.209, 212)
 Movies on a card can be  played only by devices compatible with MOV 
files.
  Since hard disk recorder s do not have an HDMI IN terminal, the camera 
cannot be connected with an HDMI cable.
  Even if the camera is  connected to a hard di sk recorder with a USB 
cable, movies and photos c annot be played nor saved.
COPY  
						

							203
k Enjoying Movies
You can playback movies on the 
camera’s LCD monitor and even edit out 
the first and last scenes. You can also 
playback the photos and movies 
recorded in the card as an automatic 
slide show.
(See the PDF file instruction manu al for ZoomBrowser EX/ImageBrowser)
The movie files recorded in the card can 
be transferred to a personal computer 
and played or edited with ZoomBrowser 
EX/ImageBrowser (provided software).
You can also extract a single frame from 
a movie and save it as a still photo.
Playback on the Camera’s LCD Monitor(p.204-208)
Playback and Editing with a Personal Computer
A movie edited with a personal computer  cannot be rewritten to the card and 
played back with the camera.
  To have the movie playback smoothl y on a personal computer, the 
personal computer must be a high-performance model. Regarding the 
hardware requirements for ZoomBr owser EX/ImageBrowser, see the 
PDF file instruction manual.
  If you want to use commer cially-available software to playback or edit the 
movies, be sure it is compatible with MOV files. For details on 
commercially-available software , inquire the software maker.
COPY  
						

							204
1Playback the image.
 Press the < x> button to display the 
images.
2Select a movie.
  Turn the < 5> dial to select the 
movie to be played.
  With the single-image display, the 
 icon displayed on the 
upper left indicates that it is a movie.
 
On the index display, the perforation on 
the left edge of the im age indicates that it 
is a movie. 
As movies cannot be played 
on the index display, press  to 
switch to the single-image display.
3On the single-image display, press .
X The movie playback panel will appear 
on the bottom.
4Playback the movie.
  Select [7 ] (Play), then press < 0>.
X The movie will start playing.
  You can pause the movie playback by 
pressing .
  During movie playback, you can 
adjust the sound volume by turning 
the < 6> dial.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Speaker
COPY  
						

							205
k Playing Movies
FunctionPlayback Description
2 ExitReturns to the single-image display.
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion speed by pressing the  key. 
The slow-motion speed is in dicated on the upper right.
5 First frameDisplays the movie’s first frame.
3 Previous frameEach time you press < 0>, a single previous frame is 
displayed. If you hold down < 0>, it will rewind the movie.
6 Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast forward the 
movie.
4  Last frameDisplays the movie’s last frame.
X  EditDisplays the editing screen (p.206).
Playback position
mm’ ss”Playback time
 Vo l u m eYou can adjust the built-in s peaker’s (p.204) sound volume 
by turning the  dial.
 With a fully-charged Batt ery Pack LP-E6, the cont inuous playback time 
will be approx. 4  hours at 23°C/73°F.
  During the single-image display, press the < B> button to switch the 
shooting information display (p.266).
  If you took a still photo while you sh ot the movie, the still photo will be 
displayed for approx. 1 sec.  during the movie playback.
  If you connect the  camera to a TV set (p.209,  212) to playback a movie, 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
adjust the sound volume.)
COPY  
						

							206
You can edit out the first and last scenes of a movie in 1-sec. increments.
1On the movie playback screen, 
select [X].
X The editing screen will be displayed.
2Specify the part to be edited out.
  Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
 
Press the  key to fast forward or turn 
the <
5> dial (next frame) to specify the 
part to be edited out, then press . After deciding which pa rt to edit out, press 
<
0>. The portion highlighted in blue on 
the top of the screen  is what will remain.
3Check the edited movie.
 Select [7] and press  to playback 
the portion highlighted in blue.
 To change the editing, go back to step 2.
  To cancel the editing, select [2] and 
press < 0>.
4Save the movie.
  Select [W ], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ]. Then press < 0>.
X Editing the Movie’s First and Last Scenes
  Since the editing is done  in 1-sec. increments (position indicated by 
[ X ]), the exact position where the movie  is edited may differ slightly from 
the position you specified.
  If the card does not have enough room, [ New file] will not be selectable.
  More movie editing functions are  available with ZoomBrowser EX/
ImageBrowser (provided software).
COPY  
						

							207
You can playback the images in the card as an automatic slide show.
1Select [Slide show].
 Under the [ 4] tab, select [ Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < V> key to select the 
desired option, then press < 0>.
[All images/Movies/Stills]
  Press the < V> key to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Date/Folder/Rating]
  Press the < V> key to select one of 
the following: [ iDate/nFolder/
Rating ].
  When < zH> is highlighted, 
press the < B> button.
  Press the < V> key to select the 
desired option, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
Item Playback Description
jAll imagesAll the still photos and movies in the card will be played back.
iDateStill photos and movies taken on the selected shooting date will 
be played back.
nFolder Still photos and movies in the se
lected folder will be played 
back.
kMoviesOnly the movies in the ca rd will be played back.
zStillsOnly the still photos in the  card will be played back.
9 Rating Only the still photos 
and movies with the selected rating will be 
played back.
COPY  
						

							208
3 Slide Show (Auto Playback)
3Set [Set up] as desired.
 Press the < V> key to select [ Set 
up], then press < 0>.
 
Set the [Display time] (still photos), 
[
Repeat], and [Transition effect] 
options, then press the  button.
4Start the slide show.
  Press the < V> key to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
 To quit the slide show  and return to the 
setting screen, press the  button.
[Display time][Repeat][Transition effect]
  To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left  of the image. Press  again to resume 
the slide show.
  During auto playback , you can press the  button to change the 
still photo display format.
  During movie playback, you can adjust  the sound volume by turning the 
.
  During pause, you can turn the < 5> dial to view another image.
  During the slide show, auto po wer off will not take effect.
  The display time may vary depending on the image.
  To view the slide show on  a TV set, see pages 209-212.
COPY  
						

							209
You can also view the still photos and movies on a TV set. Before 
connecting or disconnecting the cable between the camera and 
television, turn off the camera and television.
* Adjust the movie’s sound volume with the TV set.* Depending on the TV se t, part of the image displayed might be cut off.
The HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 With the plug’s < dHDMI MINI > logo 
facing the back of t he camera, insert 
it into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
 Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
Viewing the Images on TV
Viewing on HD (High-Definition) TV Sets
COPY  
						

							210
Viewing the Images on TV
5Press the  button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  The images will be displayed at the 
TV’s optimum resolution 
automatically.
  By pressing the < B> button, you 
can change the display format.
  To playback movies, see page 204.
 Do not connect any ot her device’s output to the camera’s  
terminal. Doing so ma y cause a malfunction.
  Some TVs might not be able to disp lay the captured images. In such a 
case, use the provided AV ca ble to connect to the TV.
  The camera’s  terminal and  terminal cannot 
be used at the same time.
COPY