Canon EOS 60D Instruction Manual

251
3 Custom Functions N
C.Fn I: ExposureA LV  
shooting
1Exposure level increments
p.252
k
2ISO speed setting incrementsk
3 ISO expansion k
4Bracketing auto cancelk
5Bracketing sequence
p.253
k
6 Safety shift k
7Flash sync. speed in Av modek
C.Fn II: Image
1Long exposure noise reductionp.254k
2High ISO speed noise reductionk
3 Highlight tone priority p.255 k
C.Fn III: Autofocus/Drive
1 Lens drive when AF impossible
p.255k
 (f )
2
AF point selection method
3Superimposed displayp.2564 AF-assist beam...

252
3 Custom Function Settings N
C.Fn I: Exposure
C.Fn I -1     Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the  shutter speed, aperture, exposure 
compensation, AEB, flash exposure  compensation, etc. Effective when 
you prefer to control the exposure in  less fine increments than 1/3-stop 
increments.
C.Fn I -2     ISO speed setting increments
0: 1/3-stop
1: 1-stop
C.Fn I -3     ISO expansion
0: Off
1: On
For the ISO speed, “ H” (equivalent to ISO 12800 ) will be...

253
3 Custom Function Settings N
C.Fn I -5     Bracketing sequence
The AEB shooting sequence and white bal ance bracketing sequence can 
be changed.
0: 0, -, +
1: -, 0, +
C.Fn I -6     Safety shift
0: Disable
1: Enable (Tv/Av)
This takes effect in the shutter-priority AE ( s) and aperture-priority AE 
( f ) modes. When the subject’s bright ness changes erratically and the 
standard auto exposure cannot be obtai ned, the camera will change the 
exposure setting automatically to obtain a standard...

254
3 Custom Function Settings N
C.Fn II: Image
C.Fn II -1     Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposure s, noise reduction is performed 
automatically if noise typical of long exposures is detected. This [ Auto] 
setting is effective in most cases.
2: On Noise reduction is performed for all ex posures of 1 sec. or longer. The 
[ On ] setting may be able to reduce  noise which otherwise cannot be 
detected with the [ Auto] setting.
C.Fn II -2     High ISO speed noise...

255
3 Custom Function Settings N
C.Fn II -3     Highlight tone priority
0: Disable
1: Enable
Improves the highlight  detail. The dynamic range is expanded from the 
standard 18% gray to br ight highlights. The gradation between the grays 
and highlights becomes smoother.
C.Fn III: Autofocus/Drive
C.Fn III -1     Lens drive when AF impossible
If autofocus is executed, but focus  cannot be achieved, the camera can 
either keep trying to focus or stop.
0: Continue focus search
1: Stop focus search
Prevents...

256
3 Custom Function Settings N
C.Fn III -3    Superimposed display
0: On
1: Off
When focus is achieved, the AF point  will not light up in red in the 
viewfinder. Set this if the AF poi nts lighting up is too distracting.
The AF point will still li ght up when you select it.
C.Fn III -4     AF-assist beam firing
The AF-assist beam can be emitted by t he camera’s built-in flash or by an 
external, EOS-dedicated Speedlite.
0: Enable
1: Disable
The AF-assist beam is not emitted.
2: Enable external flash...

257
3 Custom Function Settings N
Customizing camera controls with the Quick Control screen  (p.45)The Custom Controls function on the Quick 
Control screen is the same as the Custom 
Functions below:
[ AF and metering buttons ] : C.Fn IV -1
[ AF point selection method ] : C.Fn III -2
[ Assign SET button ] : C.Fn IV -2
C.Fn III -5     Mirror lockup
0: Disable
1: Enable
Prevents camera vibrations caused by  the reflex mirror action that can 
disturb shooting with s uper telephoto lenses or close-up (macro)...

258
3 Custom Function Settings N
C.Fn IV -2     Assign SET button
You can assign a frequently-used function to < 0>. Press < 0> when the 
camera is shooting-ready.
0: Default (no func)
1: Image quality
Pressing < 0> will display the image-recordi ng quality setting screen on 
the LCD monitor. Select the desir ed image-recording quality, then press 
.
2: Picture Style
Pressing < 0> will display the Picture  Style selection screen on the 
LCD monitor. Select a Pict ure Style, then press .
3: White balance...

259
3 Custom Function Settings N
C.Fn IV -4     Focusing Screen
If you change the focusing screen, ch ange this setting to match the 
focusing screen type. This is  to obtain the standard exposure.
0: Ef-A
1: Ef-D
2: Ef-S
About focusing scr een characteristics
Ef-A: Standard Precision Matte Standard focusing screen which comes with the camera. It 
provides a good balance between  viewfinder brightness and 
manual focusing ease.
Ef-D: Precision Matte with Grid Grid lines are added to the Ef-A 
focusing...

260
3 Custom Function Settings N
C.Fn IV -5     Add image verification data
0: Disable
1: Enable
Data for verifying whether the image is  original or not is appended to the 
image automatically. When the  shooting information of an image 
appended with the verification data  is displayed (p.191), the  icon 
will appear.
To verify whether the image is original, the Original Data Security Kit 
OSK-E3 (sold separately) is required.
The images are not compatible with  the image encryption/decryption...