Canon EOS 60D Instruction Manual

231
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust 
that might be visible on captured im ages. However, in case visible dust 
still remains, you can append the Du st Delete Data to the image for 
erasing the dust spots later. The Dust  Delete Data is used by Digital 
Photo Professional (provided software) to erase the dust spots 
automatically.
  Get a solid-white object (paper, etc.).
  Set the lens focal length to 50mm or longer.
  Set the lens focus mode switch to < MF> and...

232
3 Appending Dust Delete Data N
3Photograph a solid-white object.
 At a distance of 20 cm - 30 cm (0.7 ft. 
- 1.0 ft.), fill the viewfinder with a 
patternless, solid-white object and 
take a picture.
X The picture will be taken in the 
aperture-priority AE mode with an 
aperture of f/22.
  Since the image will  not be saved, the 
data can still be obta ined even if there 
is no card in the camera.
X
When the picture is taken, the camera 
will start obtaining the Dust Delete 
Data. When the Dust...

233
Dust which could not be removed by the automatic sensor cleaning can 
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the 
sensor needs to be cleaned directly, having it done by a Canon 
Service Center is recommended.
Before cleaning the sensor, det ach the lens from the camera.
1Select [Sensor cleaning].
 Under the [ 6] tab, select [Sensor 
cleaning ], then press < 0>.
2Select [Clean manually].
  Select [Clean manually], then press 
.
3Select [OK]....

234
3 Manual Sensor Cleaning N
 While cleaning the sensor, never do  any of the following. Doing any 
of the following will  cut off the power and close the shutter. The 
shutter curtains and image  sensor might get damaged.
• Setting the power switch to < 2>.
• Opening the battery compartment cover.
• Opening the card slot cover.
  The surface of the image  sensor is extremely delicate. Clean the sensor 
with care.
  Use a plain blower without any brus h attached. A brush can scratch the 
sensor.
  Do...

235
Printing Images
 Printing (p.236)
You can connect the camera directly to a printer and print 
out the images in the card. The camera is compatible with 
“w PictBridge” which is the standard for direct printing.
  Digital Print Order Format (DPOF) (p.245)
DPOF (Digital Print Order Fo rmat) enables you to print 
images recorded in the card according to your printing 
instructions such as the image  selection, quantity to print, 
etc. You can print multiple images in one batch or give the 
print order...

236
The direct printing procedure is done entirely with the camera 
while you look at the LCD monitor.
1Set the camera’s power switch to 
.
2Set up the printer.
 For details, see the printer’s 
instruction manual.
3Connecting the camera to the 
printer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the back of 
the camera.
  To connect to the printer, refer to the 
printer’s instruction manual.
4Turn on the...

237
Preparing to Print
6Playback the image.
 Press the  button.
X The image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Movies cannot be printed.
  The camera cannot be used  with printers compatible only with CP Direct 
or Bubble Jet Direct.
  Do not use any interface cable other than the  one provided.
  If there is a long beeping sound in st ep 5, it indicates a problem with the 
printer. Resolve the problem...

238
The screen display and setting options will differ depending on the 
printer.  Some settings might not be available. For details, see the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the  icon is 
displayed on the upper left of the LCD 
monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [Paper settings ], then press 
< 0 >.
X The paper settings screen will 
appear.
w...

239
wPrinting
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print setting screen will reappear.
* From the Exif data, the camera name, lens  name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
Q Setting the Paper...

240
wPrinting
4Set the printing effects.
 Set as necessary. If you need not set 
any printing effects, go to step 5.
  What is displayed on the screen 
differs depending on the printer.
  Select the option on the upper right 
(circled in the screenshot), then press 
.
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is displayed next to 
< z >, you can also adjust the 
printing effect (p.242).
* When you change the printing effects, it  is reflected in the image displayed on...