Canon EOS 5D Mk.4 Manual

W-37
Sending Images to a Smartphone
To end the image transfer, press the 
 button on the image transfer 
screen.
 If you have established the 
connection with the NFC function 
while playing back an image, the 
connection termination screen will 
appear. Select [ OK] to terminate the 
connection.
 If you have sent images with the 
menu or Quick Control, the previous 
screen will reappear. The connection 
will not be terminated.
Ending Image Transfer
 If necessary, also read “NFC Function Cautions”...

W-38
You can specify images viewable from a smartphone by operating the 
camera. Images can be specified during connection setup or after 
the connection is terminated.
1Select [Communication settings].
Under the [5 4] tab, select 
[Communication settings ], then 
press < 0>.
2Select [Built-in wireless settings].
3Select [Wi-Fi function].
 Set [ Wi-Fi/NFC ] to [Enable], then 
select [Wi-Fi function] (p.W-12).
Specifying Viewable Images 

W-39
Specifying Viewable Images
4Select [q].
 If the [ qWi-Fi on ] screen appears, 
select [Disconnect,exit ].
5Select [Review/change settings].
6Select [Viewable imgs].
If [Viewable imgs ] is set to any setting other than [ All images], remote 
shooting is not possible.
When reconnecting to a smartphone, check the settings of viewable images 
before establishing a connection. 

W-40
Specifying Viewable Images
7Select an item.
Select [ OK] and press < 0> to 
display the setting screen.
[All images]
All images stored on the card become viewable.
[Images from past days]
Specify viewable images on the 
shooting-date basis. Images shot up to 
nine days ago can be specified.
 Select an item, then press < 0>.
 When [Images shot in past days ] is 
selected, images shot up to the 
specified number of days before the 
current date become viewable. When 
< r > is shown for the number...

W-41
Specifying Viewable Images
[File number range] (Select range)Select the first and last images from 
images arranged by the file number to 
specify the viewable images.
1Use < 5> or < 9> to select the first 
image file.
2Press < 0> to display the image 
selection screen.
Turn the < 5> dial to select an 
image.
If you press the  button and turn 
the < 6> dial counterclockwise, you 
can select an image from the index 
display.
3 Select an image and press < 0> to 
complete the selection.
4 Use the same...

W-42
The camera can reconnect to a Wi-Fi function for which connection settings is already registered.
1Select [Communication settings].
Under the [5 4] tab, select 
[Communication settings ], then 
press < 0>.
2Select [Built-in wireless settings].
3Select [Wi-Fi function].
 Set [ Wi-Fi/NFC ] to [Enable], then 
select [Wi-Fi function] (p.W-12).
4Select the Wi-Fi function to 
connect to.
 Use < 5> or < 9> to select an item, 
then press < 0>.
 When you select [ w], a screen to 
select a Web service is...

W-43
3
Easy Connection toConnect Station
Connect Station (sold separately) is a device that allows 
you to import captured st ill photos and movies for 
viewing on your TV set, smartphone, etc., or sharing 
them over a network.
You can easily save still photos and movies to Connect 
Station by holding this camera close to Connect Station. 

W-44
This section explains how to connect the camera and Connect Station 
(sold separately) wirelessly. To save  images in other ways, refer to the 
Connect Station Instruction Manual.
 Set up the camera to allow use of its NFC function in advance 
(p.W-16).
1Enable the NFC fu nction on the 
camera 
(p.W-16).
2Hold the camera close to Connect 
Station.
 Turn on the camera and Connect 
Station, then hold the camera’s  P 
mark close to the Connect Station’s 
NFC connect point.
 When a message indicating...

W-45
Saving Images
If necessary, also read “NFC Function Cautions” (p.W-17).
 While saving images, a picture cannot be taken even if the camera’s 
shutter button is pressed.
 Do not drop the camera on Connect Station or touch the camera to it with 
too much force. Doing so may damage Connect Station’s internal hard 
disk.
 If the camera is not recognized right away, try holding it close to Connect 
Station and slowly moving it or rotating it horizontally.
 Just holding the camera close to Connect...

W-46
9Countries and Regions Permitting Wireless LAN UseUse of wireless LAN  is restricted in some countries and regions, and illegal use may 
be punishable under national or local regul ations. To avoid violating wireless LAN 
regulations, visit the Canon Web site to check where use is allowed.
Note that Canon cannot be held liable for any  problems arising from wireless LAN 
use in other countries and regions.
9 Model NumberEOS 5D Mark IV (WG): DS126601 (including WLAN module model: ES200)
FCC/IC...