Canon EOS 5D Mk.4 Manual

W-17
NFC Function
4Add [X] to [Allow NFC 
connections].
 Displayed when [ Wi-Fi/NFC] is set to 
[Enable ].
 Press the < B> button to add or 
remove [X ]. Add [X], then press 
< 0 >.
 When a nickname (for identification) 
is not registered, a registration screen 
is displayed (p.W-8).
When establishing wireless communi cations using the NFC function, 
see the following pages. Connecting to a smartphone wirelessly: page W-21*
Sending images to a smartphone: page W-31*
Connecting to Connect Station: page...

W-18
To use [q] (Connect to smartphone), a smartphone on which iOS or 
Android is installed is necessary.  In addition, the dedicated application 
Camera Connect (free of charge) must be installed on the smartphone.
 Camera Connect can be downloaded from the App Store or Google 
Play.
 For the operating system versions supported by Camera Connect, 
refer to the download site of Camera Connect.
 When an NFC-enabled smartphone is touched to the camera before 
installing Camera Connect, the download...

W-19
2
Easy Connection to aSmartphone
Communicating with a smartphone enables you to 
perform the following:
• View images stored in the camera on a smartphone or save 
viewed images to a smartphone.
• Operate the camera to take a picture or change camera  settings using a smartphone.
• Send images to a smartphone from the camera.
This section explains how to connect the camera 
directly to a smartphone via Wi-Fi.
 Install Camera Connect on the smartphone before setting 
up a connection (p.W-18).
 For...

W-20
When the smartphone is NFC-enabled: See page W-21.
You can easily set up a connec tion using the NFC function.
 When the smartphone is not NFC-enabled: See page W-24.
Set up a connection by selecting [ Easy connection].
Smartphones labeled with the  P mark are NFC-enabled. Some 
smartphones are not labeled with the  P mark even if they are NFC-
enabled; if you do not know whether your smartphone is NFC-enabled, 
contact the manufacturer of the smartphone.
Connection Method
A connection may not be...

W-21
NFC-enabled smartphones can be connected by touching them to the 
camera.
The operation flow is as follows.
(1) Turn on the camera and smartphone.
(2) Enable the NFC function on the camera and smartphone.
(3) Touch the smartphone to the camera so that they come into 
contact with each other.
 For the camera’s NFC setting, see page W-16.
 For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna 
position, refer to the smartphone’s instruction manual.
1Enable the NFC fu nction on the 
camera...

W-22
Connecting to an NFC-enabled Smartphone
3Connect to the camera.
When a connection is established, 
the screen on the left will appear on 
the camera’s LCD monitor. When 
connecting to the same smartphone, 
this screen will not appear again.
 To specify viewable images, press the 
 button. See step 7 on page 
W-40 to set them.
 Select [ OK] and press < 0>. After a 
message is displayed, the [q Wi-Fi 
on ] screen will appear.
 The main window of Camera Connect 
will be displayed on the...

W-23
Connecting to an NFC-enabled Smartphone
If necessary, also read “NFC Function Cautions” (p.W-17).
 When touching the smartphone to the camera, be careful not to drop the 
camera or smartphone.
 Do not touch the smartphone to the camera with too much force. Doing 
so can scratch the camera or smartphone.
 Just holding the smartphone close to the mark may not establish a 
connection. Be sure to touch the mark with the smartphone so that they 
come into contact with each other.
 Recognition may be...

W-24
The camera and a smartphone can be directly connected via Wi-Fi.
To establish connection, operations on the smartphone are required. 
For details, refer to the smartphone’s instruction manual.
1Install Camera Connect on the 
smartphone 
(p.W-18).
 2Select [Communication settings].
Under the [5 4] tab, select 
[Communication settings ], then 
press < 0>.
3Select [Built-in wireless settings].
4Select [Wi-Fi function].
 Set [ Wi-Fi/NFC ] to [Enable], then 
select [Wi-Fi function] (p.W-12).
 If a...

W-25
Connecting with [Easy connection]
6Select [Easy connection].
Select [ OK] and press < 0> to go to 
the next screen.
7Operate the smartphone and 
connect it to the camera.
 Activate the smartphone’s Wi-Fi 
function, then select the SSID 
(network name) displayed on the 
camera’s LCD monitor.
 For the password, enter the 
encryption key displayed on the 
camera’s LCD monitor.
Operation on the Smartphone-2
Encryption key (password)
Smartphone’s screen 
(sample)
SSID (network name)
Camera’s screen...

W-26
Connecting with [Easy connection]
8Start Camera Connect on the 
smartphone.
When the [Waiting to connect ] 
screen is displayed on the camera’s 
LCD monitor, start Camera Connect 
on the smartphone.
9Select the camera to connect to 
on the smartphone.
 Select and tap the camera to connect 
to from [ Cameras ] on Camera 
Connect.