Canon Eos 30 D Manual

							
151
3 Print Ordering
4 Exit the menu.
 Press the < M> button.
X The Print order screen will reappear.
  Next, select [ Order] or [All] to select 
the images to be printed.
Print type Standard Prints one image on one sheet.IndexMultiple, thumbnail images are printed on 
one sheet.
BothPrints both the standard and index prints.
DateOn[ On ] imprints the recorded date on the print.Off
File No.On[On ] imprints the file No. on the print.Off
K
L
L K
  RAW images cannot be selected for printing.
  Even if [ Date] and [ File No. ] are set to [ On], the date or file No. might not 
be imprinted depending on the print type setting and printer type. 
  With [ Index ] prints, both the [ Date] and [ File No. ] cannot be set to [ On] 
at the same time.
  When printing with DPOF, you must use the CF card whose Print Order 
specifications have been set. It will not  work if you just extract images 
from the CF card and try to print them.
  Certain DPOF-compatible printers and photo labs might not be able to 
print the photos as you specified. If this happens with your printer, refer 
to the printer’s instruction manual. Or check with your photo lab about 
compatibility when ordering prints.
  Do not insert into the camera a CF card whose print order were set by a 
different camera and then try to specify a print order. The print order may 
not work or may be overwritten. Also, depending on the image type, the 
print order may not be possible.  
						

							
3 Print Ordering
152
1Select [Order].
 Turn the < 5> dial to select [ Order], 
then press < 0>.
X The order screen will appear.
2Select the image to be printed.
  Turn the < 5> dial to select the 
image to be printed.
 
Press the  button to display the 
three-image view. To return to the single-
image view, press the <
u> button.
3Order the print.
  The print order will vary depending on 
the [ Print type ] (p.150) setting.
For [Standard] and [Both]
  For standard-type prints, you can set 
the quantity (up to 99) for each 
image.
  Press < 0>, then turn the < 5> dial 
to select the print quantity. Then 
press < 0>.
Selecting Individual Images for Printing
Three-image view
[Standard ]
[ Both ]
Quantity To t a l
Index icon  
						

							
153
3 Print Ordering
For [Index]
 If you want to include the image in the 
index print, checkmark the box < X>. 
To deselect it, leave the box 
unchecked.
  Press < 0> to checkmark the box 
< X >, or press < 0> again to remove 
the checkmark.
  To select other images, repeat steps 
2 and 3.
  You can select up to 998 images.
4 Exit the menu.
 Press the < M> button.
X The Print order screen will reappear.
  Press the < M> button again to 
save the print order to the CF card. 
The menu will then reappear.
[ Index ]
Check mark Index icon  
						

							
3 Print Ordering
154
The print order can also be set or c anceled for all the images in the CF 
card. For standard-type prints, a quantity of one will be ordered for all 
the images.
Note that after following the “Selec ting Individual Images” procedure, if 
you do the “Selecting All Images” proc edure, the print order will change 
to “All images.”
1Select [All].
 Turn the < 5> dial to select [ All], 
then press < 0>.
X The All screen will appear.
2Select [Mark all].
  Turn the < 5> dial to select [ Mark 
all ], then press < 0>.
X One print each will be specified for all 
the images, then the Print order 
screen will reappear.
  If you select [ Clear all], all the images 
selected for printing will be 
deselected.
3Exit the menu.
  On the Print order screen, press the 
 button.
X The settings will be saved to the CF 
card, and the menu will reappear.
Selecting All images
  Note that RAW images cannot be selected for printing even when you 
set “Mark all.”
  When printing with PictBridge, print no more than 400 images for one 
print order. If you specify more than this, all the selected images might 
not be printed.  
						

							
155
With a printer compatible with direct printing, you can easily print images specified with DPOF.
1Prepare to print.
 See “Setting the Camera” (steps 1 
and 2) and “Connect the camera to 
the printer” (steps 1 to 5) on pages 
129 to 130.
2Select [Print order].
 Turn the < 5> dial to select [ x 
Print order ], then press < 0>.
X The Print order screen will appear.
3Select [Print].
  Turn the < 5> dial to select [ Print], 
then press < 0>.
  [Print ] will be displayed only if the 
camera is connected to the printer 
and printing is possible.
X The print setting screen will appear.
4Set the printing options.
w PictBridge
 Set the [ Paper settings ] and if 
necessary, also set the printing 
effects. (p.132, 134)
3 Direct Printing with DPOF
wPictBridge SBubble Jet Direct
A CP Direct  
						

							
3 Direct Printing with DPOF
156 A
CP Direct /  SBubble Jet Direct
  Set the [ Style]. (p.139/142)
5Start printing.
 Turn the < 5> dial to select [ OK], 
then press < 0>.
X The printing will start.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
  When printing with PictBridge or Bubble Jet Direct, be sure to set the 
paper size.
 
With PictBridge, the file No. cannot  be imprinted depending on the printer. If [Bordered ] is set, the date might be imprinted on the border, 
depending on the printer.
 
The date might look light if it is imprinted on a bright background or border.
  With CP Direct, if [ Print type] is set to [Index], the number of images 
printed on one index sheet will be as follows:
• Credit card size: 20 images         • 9 x 13 cm size: 42 images
• 10 x 14.8 cm size: 63 images
As for the number of index images with Bubble Jet Direct, see the BJ 
printer’s instruction manual.
  If you stopped the printing and want to resume printing the remaining 
images, select [ Resume]. Note that printing will not resume if you stop 
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order settings.
• Before resuming the printing, you erased an image that was to be  printed.
• In the case of index printing with CP Direct, you changed the paper  cassette before resuming the printing.
• In the case of index printing with PictBridge, you changed the paper  settings before resuming the printing.
• 
When you stopped the printing, the CF card’s remaining capacity was low.  If there is a printing problem, see page 138 for PictBridge, page 141 for 
CP Direct, or page 144 for Bubble Jet Direct.  
						

							
157
10
Transferring Images toa Personal computer
You can transfer images in the CF card to a personal 
computer. When the camera is connected to a personal 
computer, you can transfer the images directly with the 
camera. This feature is called direct image transfer.
If the computer software 
(EOS DIGITAL Solution Disk 
CD-ROM) provided with the 
camera has been installed in 
your personal computer, you 
can easily transfer the 
images without operating the 
personal computer. This is 
especially convenient for 
people who are not good at 
computers.
  To install the provided software in the personal computer, see the 
“Software Guide.”
  If you want to operate the personal computer to transfer the 
images from the camera, see the “Software Instruction Manual” 
in the CD-ROM.  
						

							
158
With the camera, you can select the JPEG and RAW images to be transferred to the personal computer.
1Select [Transfer order].
 Turn the < 5> dial to select [ x 
Transfer order ], then press .
X The Transfer order screen will 
appear.
2Select [Order].
  Turn the < 5> dial to select [ Order], 
then press < 0>.
X The transfer image selection screen 
will appear.
3Select the image to be transferred.
 Turn the  dial to select the image.
  Press the < I> button to display 
the three-image view. To return to the 
single-image display, press the < u> 
button.
4Checkmark the image to be 
transferred.
 Checkmark the upper left box . To 
deselect it, leave the box unchecked.
 
Press  to checkmark the box 
< X >, or press  again to remove 
the checkmark.
  To select other images, repeat steps 
3 and 4.
  You can select up to 998 images to 
be transferred.
3 Selecting the Images to be Transferred
Selecting Individual Images  
						

							
159
3 Selecting the Images to be Transferred
5Exit the menu.
 Press the < M> button.
XThe Transfer order screen will reappear.
 Press the  button again to save 
the image selections to the CF card. The 
menu screen will then reappear.
The transfer order can also be set or canceled for all the images in the 
CF card. Note that after following the “Selecting Individual Images” 
procedure, if you do the “Selecti ng All Images” procedure, the transfer 
order will change to “All images.”
1Select [All].
 Turn the < 5> dial to select [ All], 
then press < 0>.
  When transferring more than 999 
images at one time, select [ All 
Images ] on page 162.
2Select [Mark all].
 Turn the < 5> dial to select [ Mark 
all ], then press < 0>.
X All the images will be selected for the 
transfer order, and the Transfer order 
screen will reappear.
 
If you select [Clear all], all the images 
selected for transferring will be deselected.
3Exit the menu.
  On the Transfer order screen, press 
the < M > button.
 
The image selections will be saved to the 
CF card, and the menu will reappear.
Selecting All Images  
						

							
3 Selecting the Images to be Transferred
160
Do not insert into the camera a CF card whose transfer order were set by a different 
camera and then try to specify a transfer order. The selected images might all be 
overwritten. Also, depending on the image type, the transfer order may not be possible.
For the transfer order, if you select an image captured in the RAW+JPEG 
mode, it will be counted as one image. During the direct image transfer, both 
the RAW and JPEG images will be transferred to the personal computer.
Preparation for Image Transfer
Before connecting the camera to the personal computer, be sure to first install 
the EOS DIGITAL Solution Disk software (in the CD-ROM provided with the 
camera) to the personal computer. If you connect the camera to the personal 
computer before installing the software, the personal computer will not 
recognize the camera properly and the images cannot be transferred.
Install the software to the 
personal computer.
 Refer to the separate Software Guide to 
install the software to the personal computer.
1Select [Communication].
 Turn the < 5> dial to select [ c 
Communication ], then press .
2Select [Print/PC].
  Turn the < 5> dial and select [ Print/
PC ], then press < 0>.
Installing the Software
Camera Settings
If [Communication] is set to [LAN (WFT-E1)], the personal computer will not 
be able to recognize the camera.