Canon Eos 30 D Manual

							
131
Preparing to Print
6Playback the image.
 Press the < x> button.
X The image and the printer icon < w>, 
< A >, or < S> indicating a printer 
connection will be displayed.
X The < l> button lamp will light in 
blue.
  The procedure will be different 
depending on the icon displayed. See 
the applicable pages below.
SBubble Jet Direct
ACP Direct
wPictBridge
IconReference pages
132 - 138, 147
139 - 141, 147
142 - 144, 147
w
A
S
  RAW images are not compatible with direct printing.
  If you use a battery to power the came ra, make sure it is fully charged. 
During direct printing, keep checking the battery level.
  If there is a long beeping sound in step 5, it indicates a problem with the 
PictBridge printer. To find out what’s wrong, do the following: 
Press the < x> button to playback the image and follow the steps 
below. 1. Press < 0>.
2. On the print setting screen, select [ Print].
The error message will be displayed on the LCD monitor. See “ Error 
Messages ” on page 138.
  Before disconnecting the cable, turn off the camera and printer. Pull out 
the cable while holding the plug, not the cord.
  When connecting the camera to the printer, do not use any cable other 
than the dedicated interface cable.
  Do not disconnect the cable during direct printing.  
						

							
132
The setting options will differ depending on the printer. Some 
settings might be disabled. For details, refer to your printer’s instruction 
manual.
1Select the image to be printed.
  Check that the < w> icon is 
displayed on the upper left of the LCD 
monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press < 0>.
XThe print setting screen will appear.
3Select [Paper settings].
  Turn the < 5> dial to select [ Paper 
settings ], then press < 0>.
X The Paper settings screen will 
appear.
w Printing with PictBridge
Printer connected icon
Print setting screen
* Depending on the type of printer,  the date and file number imprinting, 
trimming, and other settings might not be available. Set the printing effects.
Set the date or file number imprinting to on
or off.
Sets the quantity to be printed.
Sets the trimming area.
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout you have set will be displayed.  
						

							
133
wPrinting with PictBridge
 Turn the < 5> dial to select the size 
of the paper loaded in the printer, 
then press < 0>.
X The Paper Type screen will appear.
  Turn the < 5> dial to select the type 
of paper loaded in the printer, then 
press < 0>.
X The Layout screen will appear.
About the Paper Types
If you are using a Canon PIXMA/DS/BJ printer with Canon paper, set 
the respective paper type as follows:
If you are using a non-Canon printer, refer to the printer’s instruction 
manual.
 Turn the < 5> dial to select the 
layout, then press < 0>.
X The Print setting screen will reappear.
Setting the Paper Size
Y Setting the Paper Type
Photo Paper Plus Glossy Photo
Photo Paper Pro Fast Photo
Fine Art PaperFine Art
Photo Paper Plus GlossyDefault
USetting the Layout  
						

							
wPrinting with PictBridge
134
About Page Layout
*   From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
** This depends on the < I> date/file number imprinting option set in step 5.
 4Set the printing effects.
 Set as desired. If you need not set any 
printing effects, go to step 5 on page 137.
 Turn the  dial to select the item on the 
upper right (see left figure), then press <
0>.
 Next, turn the  dial to select the 
desired printing effect, then press .
Printing Effects  (Depending on the printer, certain items might not be displayed.)
BorderlessThe print will have no white borders. If your printer cannot print 
borderless prints, the print will have borders.
BorderedThe print will have a white border along the edges.
Bordered 
cThe shooting information* will be imprinted on the border on 9x13cm and larger prints.
xx-upOption to print 2, 4, 8, 9, 16, or 20 copies of same image on one sheet.
20-upc
35-up p
On A4 / Letter size paper, 20 or 35 thumbnails of the images 
ordered through DPOF will be printed.
[ 20-up c] will have the shooting informat ion* printed on the side of 
each thumbnail and the file number and date** printed on the 
bottom of each thumbnail image.
[ 35-up p] will have the file number  and date** printed on the 
bottom of the thumbnail images.
DefaultWith a Canon printer, the print will be borderless.
E Off Same as the printing characteristics turned “On”. No automatic 
correction will be performed.
E
OnThe image will be printed according to the printer’s standard color. 
The image’s Exif data is used to make automatic corrections.
EVividThe image will be printed with higher saturation to produce more vivid blues and greens.
0 B/W Prints in black-and-white with true blacks.
0Cool tonePrints in black-and-white with cool, bluish blacks.
0Warm tonePrints in black-and-white with warm, yellowish blacks.
zNatural No automatic correction will be  performed, and the image’s 
natural color and contrast will be used.
z Natural MThe printing characteristics are the same as the “Natural” setting. 
However, this setting enables fine adjustments for printing.  
						

							
135
wPrinting with PictBridge
 With step 4, select the item. When 
 is displayed, press the 
< C > button. You can then set the 
parameters for fine adjustments.
The parameters that can be adjusted 
for the selected item are shown in the 
table below.
  Turn the < 5> dial to select the item 
to be adjusted, then press < 0>.
Printing Adjustments  
(k : Adjustable)
  Turn the < 5> dial to make the 
adjustment, then press < 0>.
 Adjustment of Printing Effects
Item Off / On / Vivid / 
Natural Natural MB/W / Cool tone /
Warm tone
Brightnesskkk
Adjust levels–kk
k Brightenerkkk
Red-eye corr.kkk
Detail 
set.
Contrast
–
kk
Saturationk
–Color tonek
Color balancek
After making fine adjustments for the printing effect, if you do step 4 again to 
change the printing effect’s setting, the adjustments will all revert to the default.
When [ Default ] is selected, the printing adjustments can not be adjusted. 
[Brightness]  
						

							
wPrinting with PictBridge
136
 Turn the < 5> dial to select the item 
to be adjusted, then press < 0>.
  Select [ Manual ] and press < 0>. The 
Adjust levels screen will then appear.
  Turn the < 5> dial to adjust the 
shadows (black) within 0 to 127.
  Press the < C> button.
  Turn the < 5> dial to adjust the 
highlights (white) within 128 to 255.
  Press < 0> to exit. The previous 
screen will reappear.
  Turn the < 5> dial, select either [ Off] 
or [ On], then press < 0>.
  Select [ Detail set. ], then press < 0>. 
The Detail set. screen will then 
appear.
  Turn the < 5> dial to select the item 
to be adjusted, then press < 0>.
  Turn the < 5> dial to adjust the level, 
then press < 0>.
[Adjust levels]
When direct printing with DPOF (p.155) is selected, [Manual] can not be selected.
[k  Brightener] [Red-eye corr.]
 Detail Settings of Printing Effects
[Contrast] [Saturation] [Color tone]  
						

							
137
wPrinting with PictBridge
 Press the < 9> up, down, left or right 
to move the dot “   ” on the screen to 
the desired position.
 
B is for blue, A is amber, M is magenta, 
and G is green. The color balance will 
shift in the respective direction.
  On the upper left, “ SHIFT” indicates 
the color balance direction and 
correction amount.
  Press < 0> to exit. The previous 
screen will reappear.
  After completing the detail settings of 
printing effects, press the < M> 
button, then go to step 5.
 5Setting the date  and file number 
imprinting.
  Set as necessary.
 
Turn the  dial to select the field 
next to the  icon, then press .
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
6Set the number of copies.
  Set as necessary.
 
Turn the  dial to select the field 
next to the <
R> icon, then press .  Turn the < 5> dial to set the number 
of copies, then press < 0>.
 
For details on trimming, see page 145.
[Color balance]
If you select [ Clear all], all the adjustments will revert to the default.  
						

							
wPrinting with PictBridge
138
7Start printing.
 Turn the < 5> dial to select [ Print], 
then press < 0>.
X The printing will start.
X During the printing, the < l> button 
lamp will blink in blue.
  When the printing ends, the screen 
will return to step 1.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
  Depending on the image’s file size and recording quality, it may take 
some time for the printing to start after you select [ Print].
  The [ Default ] setting for printing effects and other options are the 
printer’s own default settings as set by the printer’s manufacturer. See 
the printer’s instruction manual to find out what the [ Default] settings are.
Handling Printer ErrorsIf you resolve a printer error (no ink, no paper, etc.) and select [ Continue] to 
resume printing but it does not resume, operate the buttons on the printer to 
resume printing. For details, see the printer’s instruction manual.
Error MessagesIf a problem occurs during printing, an error message will appear on the 
camera’s LCD monitor. Press < 0> to stop printing. After resolving the 
problem, resume printing. For details on how to resolve a printing problem, 
refer to the printer’s instruction manual.
Paper Error Check whether the paper is properly loaded in the printer.
Ink Error The printer has run out of ink or the waste ink tank is full.
Hardware Error Check for any printer problems other than paper and ink problems.
File Error The selected image cannot be printed via PictBridge. Images taken with 
a different camera or images edited with a computer might not be 
printable.  
						

							
139
1Select the image to be printed.
 Check that the < A> icon is displayed 
on the upper left of the LCD monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Style].
  Turn the < 5> dial to select [ Style], 
then press < 0>.
X The Style screen will appear.
A Printing with CP Direct
Printer connected icon
Print setting screen
Sets the quantity to be printed.
Sets the trimming area.
Sets the printing style.
Returns to step 1. 
Starts the printing.
The printing style settings are displayed. 
<
H> is the date icon.  
						

							
A Printing with CP Direct
140
4Set the options as desired.
  Set the [ Image], [Borders ], and 
[ Date ] as desired.
  Turn the < 5> dial to select the menu 
item, then press < 0>.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
  [Image ] is selectable when card-size 
paper is used. If you select [ Multiple], 
8 small images of the same picture 
will be printed on the paper.
  Check the [ Borders] and [Date] 
settings and set them if necessary.
  When you are done, press the 
 button to return to the print 
setting screen.
5Set the number of copies.
  Set as necessary.
  Turn the < 5> dial to select [ copies], 
then press < 0>.
  Turn the < 5> dial to set the number 
of copies, then press < 0>.
  Set a number from 1 to 99.
6Set the trimming.
 Set as necessary.
  For details on trimming, see page 
145.
[Image]
[
Borders]
[
Date]