Canon Elura 70, 65, 60 Instruction Manual

61
Advanced Functions -
Recording
E
Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used
when " H" is displayed on the screen. If not, change the setting following the
procedure below.
Open the menu and select [VCR SETUP]. Select [AV/PHONES  H], set it to
[PHONES H] and close the menu.
Adjusting the Headphone Volume
Open the menu and select [AUDIO SETUP]. Select [  HVOLUME], adjust the
volume with the SET dial and close the menu.
You...

62

The image gradually fades in.
The image gradually fades out.
Using Digital Effects
Faders ( 65)
Begin or end scenes with a fade to or from black.

Fade Trigger (FADE-T)

The image begins as a vertical line in the
center and expands sideways until it fills
the whole screen.
The image is wiped off from the sides of
the screen.Wipe (WIPE)

The image appears from the corners until
it fills the whole screen.
The image is wiped off from the corners.Corner Wipe (CORNER)

A small image appears from the...

63
Advanced Functions -
Recording
E

The image appears in zigzag from the
top of the screen.
Black stripes appear in zigzag from the
bottom of the screen until they cover the
whole image.Zigzag (ZIGZAG)

The screen turns yellow, forms a beam
that becomes thinner and the image
appears.
A yellow beam appears in the center of
the screen and expands until it covers the
whole image.Beam (BEAM)

The image appears from both sides like
tides.
The image disappears from both sides
like tides.Tide (TIDE)

The...

64
Multi-Image Screen ( 67)
Captures moving subjects in 4, 9 or 16 sequences of still images and dis\
plays them at
one time. Sound will be recorded normally.

9 Sequences
4 Sequences 16 Sequences
Effects ( 66)
Add flavor to your recordings.

Art (ART)
The image becomes like a
paint (solarization).

Black and White (BLK
& WHT)
The image becomes black
and white.

Sepia (SEPIA)
The image becomes
monochrome with a
brownish tint.

Mosaic (MOSAIC)
The image is blurred
through enlarging the size
of some...

65
Advanced Functions -
Recording
E
Selecting a Fader
In CAMERA mode, set the program selector to  Q.
1. Press the DIGITAL EFFECTS button.
[D.EFFECT |], [FADER], [EFFECT] and [MULTI-S] appear.
2. Select [FADER].
3. Select the fader option.
4. Press the DIGITAL EFFECTS button.
The name of the selected fader flashes.
CAMERA mode:
5. Fade in: In record pause mode, press the ON/OFF button and begin recording by pressing the
start/stop button.
Fade out: During recording, press the ON/OFF button
and pause...

66
Selecting an Effect in CARD CAMERA Mode
1. Press the DIGITAL EFFECTS button.
“BLK&WHT” flashes.
2. Press the ON/OFF button.
• “BLK&WHT” stops flashing.
• The effect can be activated/deactivated by pressing the ON/OFFbutton.

CARD PLAY
CARD CAMERA
PLAY (VCR)CAMERA
Selecting an Effect
In CAMERA mode, set the program selector to  Q.
1. Press the DIGITAL EFFECTS button.
[D.EFFECT |], [FADER], [EFFECT] and [MULTI-S] appear.
2. Select [EFFECT].
3. Select the effect.
4. Press the DIGITAL EFFECTS button.
The...

67
Advanced Functions -
Recording
E
Using the Multi-Image Screen
You can operate the multi-image screen only in the following playback mod\
es:
- When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse \
playback
- When [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pause
In CAMERA mode, set the program selector to  Q.
1. Press the DIGITAL EFFECTS button.
[D.EFFECT |], [FADER], [EFFECT] and [MULTI-S] appear.
2. Select [MULTI-S].
[S.SPEED] and [S.SPLIT] appears.
3. Select...

68❍
Turn off the digital effect when you do not use it. 
Press the DIGITAL EFFECTS button to open the menu. Select [D.EFFECT  |]
and press the DIGITAL EFFECTS button.
❍ The camcorder retains the setting even if you turn it off or change the program
AE mode.
❍ The image quality may be slightly lower with digital effects.
❍ Digital effects cannot be used in the following cases:
- When the program selector is set to  [.
- During DV dubbing.
❍ Faders cannot be used when Card Mix is activated.
About the...

69

Advanced Functions -
Playback
E
Magnifying the Image 
The playback image can be magnified up to 5 times. 
1. Move the zoom lever toward T.
• The image is magnified by 2 times.
• A frame appears indicating the position of the magnified area.
• To further enlarge the image, move the zoom lever toward 
T.
To shrink the image below 2 times magnification, move the zoom lever towa\
rd 
W.
2. Select the magnified area with the SET dial.
• Turn the SET dial to move the image to the right and left, or up and...

70

Displaying the Data Code 
The camcorder maintains a data code containing recording date and time a\
nd other
camera data such as shutter speed and exposure (f-stop). When you play\
 back a tape,
you can display the data code and select the data code combination you w\
ish to
display.
Selecting the Date/Time Display Combination
Open the menu and select [DISPLAY SETUP/ ]. Select [D/TIME SEL.], set it
to [DATE] or [TIME] and close the menu.
Selecting the Data Code Display Combination
Open the menu and...