Canon Digital Ixus I5 User Guide

89
Shooting
Resetting the File Number
The images you shoot are automatically assigned file numbers. You can 
select how the file number is assigned.    
Setting the File No. Reset to [Off] is useful for avoiding file name 
duplication when images are downloaded to a computer.
OnThe file number is reset to the start (100-0001) each time a new SD 
card is inserted. New images recorded on SD cards with existing files 
are assigned the next available number.
OffThe file number of the last image to be shot is...

90
About File Numbers and Folder Numbers
Images are assigned file numbers from 0001 to 9900, and folders are 
assigned folder numbers from 100 to 998 (Folder numbers cannot 
contain 99 in the last two digits).
Folder File Capacity
Each folder usually contains up to 100 images.
However, since images shot in continuous shooting and Stitch Assist 
mode are always saved into the same folder, a folder may contain 
more than 100 images. The number of images may also exceed 100 if 
a folder contains images...

91
Playback
Playback
Displaying Images Individually
1Slide the mode switch to  
(Playback).
The last recorded image will appear in the 
display (single image playback).
2Use the   or   button to move 
between the images.
Use the   button to move to the previous 
image and the   button to move the next 
image. 
Holding the button down advances the 
images more rapidly, but the images will not 
appear as clearly.
 

92
 
  Magnifying Images
To Cancel the Magnified Display
Press the MENU button to return to the normal display.
Movie frames and index playback images cannot be magnified.
1Press the   button.
 appears on the monitor, 
indicating you can further magnify the 
image (up to approx. 10 times) by holding 
down the
  button.
 When you press the   or   button, you 
can display the next or previous image at 
the same magnification.
2Press the SET button.
 
appears on the monitor, indicating 
you can scroll the...

93
Playback
 
Viewing Images in Sets of Nine (Index Playback) 
To Return to Single Image Playback
Hold down the SET button.
1Hold down the SET button.
Nine images appear at a time.
2Use the  ,  ,   or   button to 
change the image selection.
Selected Image
Movie
 

94
Viewing Movies
You can play movie clips shot in  mode.
Movies cannot be played in the index playback mode.
1Use the   or   button to select a 
movie.
Images with a   icon are movies.
2Press the SET button.
 The movie control panel will display.
 Use the   or   button to adjust the 
sound volume.
3Use the   or   button to select 
 (Play) and press the SET 
button.
 The movie and sound will play.
 When playback ends, the movie stops at 
the last frame displayed. Press the SET 
button to display the...

95
Playback
Pausing and Resuming Play
Operating the Movie Control Panel
 You may experience frame dropping and audio breakup when 
playing back a movie on a computer with insufficient system 
resources.
 Movies shot with other cameras may not play back on this camera. 
See List of Messages (p. 134).
 You can adjust the playback volume of movie clips in the   (Set 
up) menu.
 Use the television’s controls to adjust the volume when playing a 
movie on a TV set (p. 126).
Press the SET button during...

96
Editing Movies
Selecting   (Edit) in the movie control panel enables you to cut unwanted 
portions at the start or end of a movie clip.
Protected movies and movies less than 1 second in duration cannot 
be edited.
1Use the   or   button to select a 
movie and press the SET button.
2Switch to the movie editing mode.
See Operating the Movie Control Panel (p. 
95).
 The movie editing panel and the movie 
editing bar will display.
3Use the   or   button to select   
or   and the   or   button to 
set...

97
Playback
 The minimum duration of a movie that can be edited is 1 second.
 It may take approximately 3 minutes to save an edited movie. If the 
battery pack runs out of charge partway through, edited movie clips 
cannot be saved. When editing movies, use a fully charged battery 
pack (p. 17).
4Use the   or   button to select   
(Play) and press the SET button.
 A preview of the temporarily edited movie 
clip plays.
 To stop it, press the SET button again.
5Use the   or   button to select   
(Save)...

98
Rotating Images in the Display
Images can be rotated clockwise 90° or 270° in the display.
 Movies cannot be rotated.
 When images are downloaded to a computer, the orientation of 
images rotated by the camera will depend upon the software used 
to download the images.
 Images can be magnified when rotated (p. 92).
 Images taken vertically with Auto Image Rotate (p. 88) set to [On] 
will automatically be rotated to the vertical position when viewed on 
the camera’s LCD monitor.
1In the   (Play)...