Canon Color Imageclass Mf8280cw User Guide

							111
Troubleshooting
 QCan I change the folder that the scanned images are saved to?
└	AYes, you can change the folder to save the scanned images when scanning with MF 
Toolbox.
T\f change,
1. Fr\fm the MF T\f\flb\fx screen, click [ Browse].
 
2. L\fcate a f\flder t\f save the scanned images, and then click [ OK].
 QCan I scan multiple images and save as a single PDF file?
└	AYes, you can save multiple images as a single PDF file when scanning with MF Toolbox.
T\f make a single PDF file \ff multiple pages,
1. Fr\fm the PDF m\fde screen \ff MF T\f\flb\fx, select [ PDF (Multiple Pages)] in [Save as Type ].
 
2. Scan the d\fcuments.
 
						

							112
If a Power Failure Occurs
The mach\fne cannot be used wh\fle the power supply \fs cut OFF.
The fax function during a power failure :
•	Faxes cannot be sent or rece\fved.
•	You may not be able to make a call w\fth the external telephone 
depend\fng on your telephone.
•	You may be able to rece\fve a call w\fth the external telephone 
depend\fng on your telephone.Data storage for when the power supply is cut OFF
Even \ff power \fs lost due to a power fa\flure or 
acc\fdental unplugg\fng, any sent or rece\fved 
documents stored \fn the memory are backed up.
Recycling Used Cartridges
Canon has \fnst\ftuted a worldw\fde recycl\fng 
program for cartr\fdges called “The Clean 
Earth Campa\fgn”. Th\fs program preserves 
prec\fous natural resources by ut\fl\fz\fng 
a var\fety of mater\fals found \fn the used 
cartr\fdges that are of no further use, to 
remanufacture new cartr\fdges wh\fch, at 
the same t\fme, keeps the env\fronment 
cleaner by reduc\fng landfill waste.
Complete deta\fls concern\fng th\fs program 
are enclosed \fn each Cartr\fdge box.
The Clean Earth Campaign
THE Canon CARTRIDGE RECYCLING 
PROGRAM
The Canon Cartr\fdge Recycl\fng \brogram fulfills the first \fn\ft\fat\fve 
of Canon’s Clean Earth Campa\fgn, wh\fch supports four cr\ft\fcal 
env\fronmental areas:
•	Recycl\fng \fn the Workplace
•	Conserv\fng Env\fronmental Resources
•	Sc\fent\ffic Research and Educat\fon
•	Encourag\fng Outdoors Apprec\fat\fon
The rema\fn\fng “Clean Earth” \fn\ft\fat\fves are supported \fn the 
U.S. through sponsorsh\fps of the Nat\fonal \bark Foundat\fon, the 
Nat\fonal W\fldl\ffe Federat\fon, and The Nature Conservancy and \fn 
Canada through donat\fons to the World W\fldl\ffe Fund Canada and 
The Nature Conservancy of Canada.
S\fnce \fts \fncept\fon, The Canon Cartr\fdge Recycl\fng \brogram has 
collected huge amount of cartr\fdges that otherw\fse would have 
been d\fscarded \fnto landfills or s\fm\flar fac\fl\ft\fes.   
Instead, th\fs rap\fdly grow\fng program returns used cartr\fdges to 
the manufactur\fng process, thus conserv\fng an array of resources. 
Becom\fng a part of th\fs worthwh\fle program \fs easy. When your 
cartr\fdge \fs of no further use, s\fmply follow the \fnstruct\fons 
deta\fled for U.S. or Canad\fan res\fdents. We apprec\fate your support of The Canon Cartr\fdge Recycl\fng 
\brogram. 
Work\fng together we can make a s\fgn\fficant contr\fbut\fon to a 
cleaner planet.
•	Cartr\fdges collected through th\fs program are not refilled.
•	You are not ent\ftled to a tax deduct\fon or rebate for the return 
of empty cartr\fdges.
•	Th\fs program may be mod\ffied or d\fscont\fnued w\fthout not\fce.
U.S.A. PROGRAM
Packaging
Option A\b1: Single Box Return
•	Repackage the empty cartr\fdge ut\fl\fz\fng the wrapper and pulp 
mould end-blocks from the new cartr\fdge’s box.
•	\blace the empty cartr\fdge \fn the box of your new cartr\fdge. 
 
Seal the box.
Option B: Volume Box Return
We encourage you to use th\fs opt\fon as a more effic\fent way to 
sh\fp cartr\fdges.
•	\blace as many cartr\fdges as poss\fble \fnto one box. 
Carefully seal the box w\fth tape; 
or
•	Call 1-800-OK-Canon to rece\fve your free e\fght cartr\fdge 
collect\fon box.
Option A\b2: Multiple Box Return
We encourage you to use th\fs opt\fon as a more effic\fent way to 
sh\fp cartr\fdges.
•	Complete Opt\fon A-1.
•	Bundle mult\fple cartr\fdge boxes together securely w\fth tape.
IMPORTANTI M PO RTA N T
  
						

							113
\blease be sure that the sh\fpment does not exceed U\bS 
spec\fficat\fons.
Max\fmum we\fght = 70 lb. (31.8 kg)
Max\fmum length = 108” (2,743 mm)
Max\fmum g\frth (length + 2 x w\fdth + 2 x he\fght) = 130” (3,302 mm)
If your sh\fpment exceeds the above l\fm\fts, please call 1-800-OK-
Canon for spec\fal sh\fpp\fng \fnformat\fon.Please Note:
Do not send defect\fve cartr\fdges for replacement.
Defect\fve cartr\fdges under warranty should be exchanged 
by an author\fzed dealer or serv\fce fac\fl\fty as prov\fded \fn the 
warranty.
Shipping
Apply the U\bS author\fzed return\fng label prov\fded \fn th\fs gu\fde.
Res\fdents of Alaska and Hawa\f\f, Do not use the U\bS author\fzed 
return\fng label. For Alaska and Hawa\f\f: Canon set up alternat\fve 
ma\fl serv\fce w\fth the U.S. \bostal Serv\fce.
\blease call 1-800-OK-Canon to rece\fve U.S. \bostal Serv\fce 
merchand\fse return\fng label.
•	G\fve the sh\fpment to your U\bS dr\fver when you rece\fve your 
next regular del\fvery; (U\bS may charge a fee for customers who 
call U\bS to p\fck up a cartr\fdge sh\fpment \ff they do not already 
have a del\fvery scheduled.) 
or
•	Take the sh\fpment to your local U\bS rece\fv\fng po\fnt.
CANADA PROGRAM\bCANADA PROGRAMME
Option A: Single Box Return
•	Repackage the empty cartr\fdge ut\fl\fz\fng the wrapper and pulp 
mould end-blocks from the new cartr\fdge’s box.
•	\blace the empty cartr\fdge \fn the box of your new cartr\fdge.   
Seal the box.
•	Apply the Canon Canada Inc./Canada \bost label prov\fded \fn th\fs 
brochure. Canon’s labels are spec\fally marked so that Canon 
pays the postage.
•	Depos\ft your empty cartr\fdge \fn any full s\fze street ma\flbox or 
take \ft to your local Canada \bost outlet or franch\fse.
Option B: Volume Box Return (eight or more cartridges)
We encourage you to use th\fs opt\fon as a more effic\fent way to 
sh\fp cartr\fdges.
•	Call 1-800-667-2666 to rece\fve your free Canon collect\fon box 
k\ft.
•	The collect\fon box can accommodate e\fght \fnd\fv\fdual cartr\fdge 
boxes.
•	\blace your e\fght \fnd\fv\fdually packaged boxes of empty 
cartr\fdges \fnto the Canon collect\fon box. Seal the box.
•	Apply the Canon Canada Inc./Canada \bost label prov\fded \fn th\fs 
brochure.
•	Canon’s labels are spec\fally marked so that Canon pays the 
postage.
•	Del\fver to any local Canada \bost outlet or franch\fse. Customers 
who hold a Commerc\fal p\fck-up agreement w\fth Canada \bost 
may have the\fr collect\fon box p\fcked up.
Work\fng to preserve endangered spec\fes \fs a long-stand\fng Canon 
\fnterest.
To th\fs end, for every cartr\fdge collected, Canon Canada donates 
$1, shared equally between World W\fldl\ffe Fund Canada and the 
Nature Conservancy of Canada. Th\fs donat\fon \fs ut\fl\fzed \fn Canada.
•	For further \fnformat\fon about The Clean Earth Campa\fgn \fn 
Canada, please call or wr\fte to Canon. 
1-800-667-2666 
Canon Canada Inc. 
Corporate Customer Relat\fons 
6390 D\fx\fe Road 
M\fss\fssauga, ON L5T 1\b7
Important Safety Instructions
\blease read the “Important Safety Instruct\fons” \fn th\fs manual and 
\fn the e-Manual thoroughly before operat\fng the mach\fne.
As these \fnstruct\fons are \fntended to prevent \fnjury to the user 
and other persons or to prevent destruct\fon of property, always 
pay attent\fon to these \fnstruct\fons and operat\fonal requ\frements.
\blease note that you are respons\fble for all damages caused by
fa\flure to follow the d\frect\fons prov\fded here\fn, us\fng the 
dev\fce for any purpose for wh\fch \ft was not \fntended, or repa\frs 
or alterat\fons made by anyone other than a Canon-approved 
techn\fc\fan.
Installation
 \fARNING 
•	Do not \fnstall the mach\fne near flammable substances such as 
alcohol-based products or pa\fnt th\fnners. If these substances 
come \fnto contact to the electr\fcal parts \fns\fde the mach\fne 
could \fgn\fte these substances and cause a fire or \fncrease your 
r\fsk of electr\fc shock.
•	Do not place necklaces and other metal objects or conta\fners 
filled w\fth l\fqu\fd on the mach\fne. If fore\fgn substances come \fn 
contact w\fth electr\fcal parts \fns\fde the mach\fne, th\fs may result 
\fn a fire or electr\fcal shock. 
If any of these substances falls \fnto the mach\fne, turn off the 
power to the mach\fne \fmmed\fately and contact your local 
Canon dealer.
•	Do not use near any med\fcal equ\fpment. Rad\fowave em\ftted 
from th\fs mach\fne may \fnterfere w\fth med\fcal equ\fpments, 
wh\fch may result \fn ser\fous acc\fdents.
  
						

							114
 CAUTION 
•	Do not \fnstall the mach\fne \fn the follow\fng locat\fons. Do\fng so 
may result \fn personal \fnjury, fire or electr\fcal shock.
	
–Unstable l\fcati\fn
	
–A l\fcati\fn subject t\f excessive vibrati\fns
	
–A l\fcati\fn where bl\fck the ventilati\fn sl\fts (t\f\f cl\fse t\f walls, 
bed, shaggy rug, and \fther similar \fbjects)
	
–A damp \fr dusty l\fcati\fn
	
–A l\fcati\fn exp\fsed t\f direct sunlight \fr an \futside place
	
–A l\fcati\fn subject t\f high temperatures
	
–A l\fcati\fn near \fpen flames
	
–A l\fcati\fn with p\f\fr ventilati\fn system
•	Although ozone \fs produced by th\fs mach\fne \fs work\fng, the 
amount \fs too low to have any effect on the human body. 
However, \ff you \fntend to use the mach\fne for long per\fods of 
t\fme, ensure that the \fnstallat\fon locat\fon \fs well vent\flated.
•	Do not connect unapproved cables to th\fs mach\fne. Do\fng so 
may result \fn a fire or an electr\fc shock.
Power Supply
 \fARNING 
•	Do not use power cords other than the one prov\fded, as th\fs can 
result \fn a fire or electr\fcal shock.
•	Do not mod\ffy or bend the power cord and do not pull on \ft 
w\fth great force. Do not place heavy objects on the power cord. 
Damag\fng the power cord may result \fn a fire or an electr\fc 
shock.
•	Do not plug or unplug the power plug w\fth wet hands, as th\fs 
can result \fn electr\fcal shock.
•	Do not use extens\fon cords or mult\f-plug power str\fps w\fth th\fs 
mach\fne. Do\fng so may result \fn a fire or electr\fc shock.
•	Do not bundle up or t\fe up the power cord \fn a knot, as th\fs can 
result \fn a fire or electr\fcal shock.
•	Insert the power plug completely \fnto the AC power outlet. 
Fa\flure to do so can result \fn a fire or electr\fcal shock.
•	Remove the power plug completely from the power outlet 
dur\fng a thunder storm. Fa\flure to do so can result \fn a fire, 
electr\fcal shock, or malfunct\fon.
 CAUTION 
•	Use only a power supply that meets the voltage requ\frements 
l\fsted here\fn. Fa\flure to do so may result \fn a fire or electr\fc 
shock.
•	Do not obstruct the power outlet where th\fs mach\fne \fs 
connected, so that you can unplug the power cord eas\fly \fn an 
emergency.
Handling
 \fARNING
•	Do not d\fsassemble or mod\ffy the mach\fne. There are h\fgh-
temperature and h\fgh-voltage components \fns\fde the mach\fne 
wh\fch may result \fn a fire or electr\fcal shock. 
•	Do not allow ch\fldren to touch or play w\fth the power cord 
and cables or \fnternal or electr\fcal parts. Do\fng so may result \fn 
ser\fous personal \fnjury.
•	\blease contact an author\fzed Canon dealer \ff the mach\fne 
makes an unusual no\fse, em\fts an unusual smell, or em\fts smoke 
or excess\fve heat. Cont\fnued use may result \fn a fire or electr\fc 
shock.
•	Do not use flammable sprays near the mach\fne. If flammable 
substances come \fnto contact w\fth electr\fcal parts \fns\fde the 
mach\fne, th\fs may result \fn a fire or electr\fc shock.
 CAUTION 
•	For your safety, please unplug the power cord \ff the mach\fne 
w\fll not be used for a long per\fod of t\fme.
•	Use caut\fon when open\fng and clos\fng covers to avo\fd \fnjury to 
your hands.
•	Keep hands and cloth\fng away from the rollers \fn the output 
area. If the rollers catch your hands or cloth\fng, th\fs may result \fn 
personal \fnjury.
•	The \fns\fde of the mach\fne and the output slot \fs very hot dur\fng 
and \fmmed\fately after use. Avo\fd contact w\fth these areas to 
prevent burns. Also, pr\fnted paper may be hot \fmmed\fately after 
be\fng output, so use caut\fon when handl\fng \ft. Fa\flure to do so 
may result \fn burns.
Maintenance and Inspections
 \fARNING
•	Turn off the mach\fne and unplug the power cord from the 
outlet before clean\fng. Fa\flure to do so may result \fn a fire or an 
electr\fc shock
•	Unplug the power plug from the power outlet per\fod\fcally and 
clean the area around the base of the power plug’s metal p\fns 
and the power outlet w\fth a dry cloth to remove dust and gr\fme. 
When damp, accumulated dust may cause short c\frcu\ft\fng or 
fires.
•	Use a damp, well wrung-out cloth to clean the mach\fne. 
Dampen clean\fng cloths w\fth water only. Do not use alcohol, 
benzenes, pa\fnt th\fnners, or other flammable substances. If 
these substances come \fnto contact w\fth electr\fcal parts \fns\fde 
the mach\fne, th\fs may result \fn a fire or electr\fc shock.
•	Check the power cord and plug regularly for damage. Check 
the mach\fne for rust, dents, scratches, cracks, or excess\fve heat 
generat\fon. Use of poorly-ma\fnta\fned equ\fpment may result \fn a 
fire or electr\fc shock.
Consumables
 \fARNING
•	Do not d\fspose of used toner cartr\fdges \fn open flames. Th\fs 
may cause an \fgn\ft\fon, and result \fn burns or fire.
•	If you acc\fdentally sp\fll or scatter toner, carefully w\fpe up the 
loose toner w\fth a damp, soft cloth and avo\fd \fnhal\fng any toner 
dust. Never use a vacuum cleaner to clean up loose toner. Do\fng 
so may cause a malfunct\fon \fn the vacuum cleaner or result \fn a 
dust explos\fon due to stat\fc d\fscharge.
 CAUTION 
•	Keep the toner cartr\fdges and other consumables out of the 
reach of small ch\fldren. If toner \fs \fngested, consult a phys\fc\fan 
or po\fson control center \fmmed\fately.
•	Do not attempt to d\fsassemble the toner cartr\fdge. The toner 
may scatter and get \fnto your eyes or mouth. If toner gets \fnto 
your eyes or mouth, wash them \fmmed\fately w\fth cold water 
and consult a phys\fc\fan.
•	If toner sp\flls from the toner cartr\fdge, avo\fd \fnhal\fng \ft or 
allow\fng \ft to come \fnto contact w\fth your sk\fn. If the toner 
comes \fnto contact w\fth your sk\fn, wash \fmmed\fately w\fth soap. 
If you \fnhale the toner or your sk\fn becomes \frr\ftated due to 
contact w\fth the toner, consult a phys\fc\fan or po\fson control 
center \fmmed\fately.
  
						

							115
Others
 \fARNING
•	If you are us\fng a card\fac pacemaker:  
Th\fs mach\fne generates a low level magnet\fc field. If you feel 
any abnormal\ft\fes \fn your body wh\fle us\fng th\fs mach\fne, please 
move away from the mach\fne and consult your phys\fc\fan 
\fmmed\fately.
Telephone Equipment
When us\fng telephone equ\fpment, bas\fc safety precaut\fons 
should always be followed to reduce the r\fsk of fire, electr\fc shock, 
and \fnjury to persons, \fnclud\fng the follow\fng:
1.  Do not use th\fs mach\fne near water (\f.e., near a bathtub, k\ftchen 
s\fnk, or laundry tub), or \fn a wet basement or near a sw\fmm\fng 
pool.
2.  Avo\fd us\fng the telephone dur\fng an electr\fcal storm, as there 
may be a remote r\fsk of electr\fc shock from l\fghtn\fng. 
3.  Do not use the telephone to report a gas leak \fn the v\fc\fn\fty of 
the leak.
Legal Notices
Legal Limitations on the Usage of Your 
Product and the Use of Images
Us\fng your product to scan, pr\fnt or otherw\fse reproduce certa\fn 
documents, and the use of such \fmages as scanned, pr\fnted or 
otherw\fse reproduced by your product, may be proh\fb\fted by law 
and may result \fn cr\fm\fnal and/or c\fv\fl l\fab\fl\fty.
A non-exhaust\fve l\fst of these documents \fs set forth below. Th\fs 
l\fst \fs \fntended to be a gu\fde only. If you are uncerta\fn about 
the legal\fty of us\fng your product to scan, pr\fnt or otherw\fse 
reproduce any part\fcular document, and/or of the use of the 
\fmages scanned, pr\fnted or otherw\fse reproduced, you should 
consult \fn advance w\fth your legal adv\fsor for gu\fdance.
•	\baper Money
•	Money Orders
•	Cert\fficates of Depos\ft
•	\bostage Stamps (canceled or uncanceled)
•	Ident\ffy\fng Badges or Ins\fgn\fas
•	Select\fve Serv\fce or Draft \bapers
•	Checks or Drafts Issued by Governmental Agenc\fes
•	Motor Veh\fcle L\fcenses and Cert\fficates of T\ftle
•	Travelers Checks
•	Food Stamps
•	\bassports
•	Imm\fgrat\fon \bapers
•	Internal Revenue Stamps (canceled or uncanceled)
•	Bonds or Other Cert\fficates of Indebtedness
•	Stock Cert\fficates
•	Copyr\fghted Works/Works of Art w\fthout \berm\fss\fon of 
Copyr\fght Owner
FCC (Federal Communications Commission)
Color \fmageCLASS MF8580Cdw: F164802
Color \fmageCLASS MF8280Cw: F164702
Conta\fns Transm\ftter Module FCC ID: AZDFM48944
Th\fs dev\fce compl\fes w\fth \bart 15 of the FCC Rules. Operat\fon
\fs subject to the follow\fng two cond\ft\fons:
1.  Th\fs dev\fce may not cause harmful \fnterference, and
2.  Th\fs dev\fce must accept any \fnterference rece\fved, \fnclud\fng 
\fnterference that may cause undes\fred operat\fon.
FCC \fARNING
Changes or mod\fficat\fons not expressly approved by the party 
respons\fble for compl\fance could vo\fd the user’s author\fty to 
operate the equ\fpment.
•	\broperly sh\felded and grounded cables and connectors must 
be used for connect\fon to host computers and/or per\fpherals \fn 
order to meet FCC em\fss\fon l\fm\fts.
Th\fs equ\fpment has been tested and found to comply 
w\fth the l\fm\fts for a class B d\fg\ftal dev\fce, pursuant to 
\bart 15 of the FCC Rules. These l\fm\fts are des\fgned to 
prov\fde reasonable protect\fon aga\fnst harmful 
\fnterference \fn a res\fdent\fal \fnstallat\fon. Th\fs 
equ\fpment generates, uses and can rad\fate rad\fo 
frequency energy and, \ff not \fnstalled and used \fn 
accordance w\fth the \fnstruct\fons, may cause harmful 
\fnterference to rad\fo commun\fcat\fons. However, there 
\fs no guarantee that \fnterference w\fll not occur \fn a 
part\fcular \fnstallat\fon. If th\fs equ\fpment does cause 
harmful \fnterference to rad\fo or telev\fs\fon recept\fon, 
wh\fch can be determ\fned by turn\fng the equ\fpment 
OFF and ON, the user \fs encouraged to try to correct 
the \fnterference by one or more of the follow\fng 
measures:
•	Reor\fent or relocate the rece\fv\fng antenna.
•	Increase the separat\fon between the equ\fpment and 
rece\fver.
•	Connect the equ\fpment to an outlet on a c\frcu\ft 
d\ffferent from that to wh\fch the rece\fver \fs 
connected.
•	Consult the dealer or an exper\fenced rad\fo/TV 
techn\fc\fan for help.
Th\fs transm\ftter must not be co-located or operated \fn 
conjunct\fon w\fth any other antenna or transm\ftter.
Th\fs equ\fpment compl\fes w\fth FCC rad\fat\fon exposure 
l\fm\fts set forth for an uncontrolled env\fronment 
and meets the FCC rad\fo frequency (RF) Exposure 
Gu\fdel\fnes \fn Supplement C to OET65. Th\fs equ\fpment 
should be \fnstalled and operated keep\fng the rad\fator 
at least 20cm or more away from person’s body 
(exclud\fng extrem\ft\fes: hands, wr\fsts, feet and ankles).
Use of sh\felded cables \fs requ\fred to comply w\fth class 
B l\fm\fts \fn Subpart B of \bart 15 of the FCC Rules. Do not 
make any changes or mod\fficat\fons to the equ\fpment 
unless otherw\fse spec\ffied \fn th\fs manual. If you make 
such changes or mod\fficat\fons, you could be requ\fred 
to stop operat\fon of the equ\fpment.
Canon U.S.A., Inc.
One Canon \bark, Melv\flle, NY 11747, U.S.A.
TEL No. 1-800-OK-CANON
  
						

							116
Users in the U.S.A.
\bre-Installat\fon Requ\frements for Canon Facs\fm\fle Equ\fpment
A. Location
Supply a su\ftable table, cab\fnet, or desk for the mach\fne. See the 
e-Manual for spec\ffic d\fmens\fons and we\fght.
B. Order Information
1. A s\fngle telephone l\fne (touch-tone or rotary) should be used.
2.  Order an RJ11-C telephone wall jack (USOC), wh\fch should be 
\fnstalled by the telephone company. If the RJ11-C wall jack \fs 
not present, telephone/facs\fm\fle operat\fon \fs not poss\fble.
3.  Order a normal bus\fness l\fne from your telephone company’s 
bus\fness representat\fve. The l\fne should be a regular vo\fce 
grade l\fne or an equ\fvalent one. Use one l\fne per un\ft.
DDD (D\frect D\fstance D\fal) l\fne
-or-
IDDD (Internat\fonal D\frect D\fstance D\fal) l\fne \ff you commun\fcate 
overseas Canon recommends an \fnd\fv\fdual l\fne follow\fng 
\fndustry standards, \f.e., 2,500 (touch-tone) or 500 
(rotary/pulse d\fal) telephones. A ded\fcated extens\fon 
off a \bBX (\br\fvate Branch eXchange) un\ft w\fthout “Call 
Wa\ft\fng” can be used w\fth your facs\fm\fle un\ft. Key 
telephone systems are not recommended because 
they send nonstandard s\fgnals to \fnd\fv\fdual 
telephones for r\fng\fng and spec\fal codes, wh\fch may 
cause a facs\fm\fle error.
 C. Power Requirements
The mach\fne should be connected to a standard 120 volt AC, 
three-w\fre grounded outlet only.
Do not connect th\fs mach\fne to an outlet or power l\fne 
shared w\fth other appl\fances that cause “electr\fcal no\fse.” A\fr 
cond\ft\foners, electr\fc typewr\fters, cop\fers, and mach\fnes of 
th\fs sort generate electr\fcal no\fse that often \fnterferes w\fth 
commun\fcat\fons equ\fpment and the send\fng and rece\fv\fng of 
documents.
Connection of the Equipment
Th\fs equ\fpment compl\fes w\fth \bart 68 of the FCC rules and the 
requ\frements adopted by the ACTA. On the rear panel of th\fs 
equ\fpment \fs a label that conta\fns, among other \fnformat\fon, a 
product \fdent\ffier \fn the format US:AAAEQ##TXXXX. If requested, 
th\fs number must be prov\fded to the telephone company.
The REN (R\fnger Equ\fvalence Number) \fs used to determ\fne the 
number of dev\fces that may be connected to a telephone l\fne. 
Excess\fve RENs on a telephone l\fne may result \fn the dev\fces not 
r\fng\fng \fn response to an \fncom\fng call. In most, but not all areas, 
the sum of the RENs should not exceed five (5.0). 
To be certa\fn of the number of dev\fces that may be connected to a 
l\fne, as determ\fned by the total RENs, contact the local telephone 
company. The REN for th\fs product \fs part of the product \fdent\ffier 
that has the format US: AAAEQ##TXXXX. The d\fg\fts represented by 
## are the REN w\fthout a dec\fmal po\fnt (e.g., 10 \fs a REN of 1.0).
An FCC compl\fant telephone l\fne cable and modular plug \fs 
prov\fded w\fth th\fs equ\fpment. Th\fs equ\fpment \fs des\fgned to be 
connected to the telephone network or prem\fse w\fr\fng us\fng a 
compat\fble modular jack that \fs \bart 68 compl\fant. Th\fs equ\fpment may not be used on co\fn serv\fce prov\fded by the 
telephone company. Connect\fon to party l\fnes \fs subjected to 
state tar\fffs.
In Case of Equipment Malfunction
Should any malfunct\fon occur wh\fch cannot be corrected by the 
procedures descr\fbed \fn th\fs gu\fde or the e-Manual, d\fsconnect 
the equ\fpment from the telephone l\fne cable and d\fsconnect the 
power cord.
The telephone l\fne cable should not be reconnected or the power 
sw\ftch turned ON unt\fl the problem \fs completely resolved. Users 
should contact Canon Author\fzed Serv\fce Fac\fl\ft\fes for serv\fc\fng 
of equ\fpment, Informat\fon regard\fng Author\fzed Serv\fce Fac\fl\fty 
locat\fons can be obta\fned by call\fng Canon Customer Care Center 
(1-800-OK-CANON).
Rights of the Telephone Company
If th\fs equ\fpment (Color \fmageCLASS MF8580Cdw/MF8280Cw) 
causes harm to the telephone network, the telephone company 
may temporar\fly d\fsconnect serv\fce. The telephone company also 
reta\fns the r\fght to make changes \fn fac\fl\ft\fes and serv\fces that may 
affect the operat\fon of th\fs equ\fpment. When such changes are 
necessary, the telephone company \fs requ\fred to g\fve adequate 
pr\for not\fce to the user.
However, \ff advance not\fce \fs not poss\fble, the telephone 
company w\fll not\ffy the customer as soon as poss\fble. Also, the 
customer w\fll be adv\fsed of h\fs/her r\fght to file a compla\fnt w\fth 
the FCC \ff he/she bel\feves \ft \fs necessary.
 \fARNING
The Telephone Consumer \brotect\fon Act of 1991 makes \ft 
unlawful for any person to use a computer or other electron\fc 
dev\fce, \fnclud\fng FAX mach\fnes, to send any message unless such 
message clearly conta\fns \fn a marg\fn at the top or bottom of each 
transm\ftted page or on the first page of the transm\fss\fon, the date 
and t\fme \ft \fs sent and an \fdent\fficat\fon of the bus\fness or other 
ent\fty, or other \fnd\fv\fdual send\fng the message and the telephone 
number of the send\fng mach\fne or such bus\fness, other ent\fty, or 
\fnd\fv\fdual.
(The telephone number prov\fded may not be a 900 number or 
any other number for wh\fch charges exceed local or long-d\fstance 
transm\fss\fon charges.)
In order to program th\fs \fnformat\fon \fnto your 
mach\fne, you should complete the procedure for 
reg\fster\fng your name, un\ft’s telephone number, t\fme, 
and date \fn Gett\fng Started.
Users in Canada
\bre-Installat\fon Requ\frements for Canon Facs\fm\fle Equ\fpment
A. Location
Supply a su\ftable table, cab\fnet, or desk for the mach\fne. See the 
e-Manual for spec\ffic d\fmens\fons and we\fght.
B. Order Information
1. A s\fngle telephone l\fne (touch-tone or rotary) should be used.
2.  Order a CA11A modular jack, wh\fch should be \fnstalled by 
the telephone company. If the CA11A jack \fs not present, 
\fnstallat\fon cannot occur.
3.  Order a normal bus\fness l\fne from your telephone company’s 
bus\fness representat\fve. The l\fne should be a regular vo\fce 
grade l\fne or an equ\fvalent one. Use one l\fne per un\ft.
  
						

							117
DDD (D\frect D\fstance D\fal) l\fne
-or-
IDDD (Internat\fonal D\frect D\fstance D\fal) l\fne \ff you commun\fcate 
overseas Canon recommends an \fnd\fv\fdual l\fne follow\fng 
\fndustry standards, \f.e., 2,500 (touch-tone) or 500 
(rotary/pulse d\fal) telephones. A ded\fcated extens\fon 
off a \bBX (\br\fvate Branch eXchange) un\ft w\fthout “Call 
Wa\ft\fng” can be used w\fth your facs\fm\fle un\ft. Key 
telephone systems are not recommended because 
they send nonstandard s\fgnals to \fnd\fv\fdual 
telephones for r\fng\fng and spec\fal codes, wh\fch may 
cause a facs\fm\fle error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle 
(S\fngle or Duplex). It should be \fndependent from cop\fers, heaters, 
a\fr cond\ft\foners, or any electr\fc equ\fpment that \fs thermostat\fcally 
controlled. The rated value \fs 115 volts and 15 amperes. The CA11A 
modular jack should be relat\fvely close to the power outlet to 
fac\fl\ftate \fnstallat\fon.
Notice
•	Th\fs product meets the appl\fcable Industry Canada techn\fcal 
spec\fficat\fons.
•	The R\fnger Equ\fvalence Number \fs an \fnd\fcat\fon of the 
max\fmum number of dev\fces allowed to be connected to a 
telephone \fnterface. The term\fnat\fon of an \fnterface may cons\fst 
of any comb\fnat\fon of dev\fces subject only to the requ\frement 
that the sum of the RENs of all the dev\fces does not exceed five.
•	The REN of th\fs product \fs 1.0.
•	Before \fnstall\fng th\fs equ\fpment, users should ensure that 
\ft \fs perm\fss\fble to be connected to the fac\fl\ft\fes of the local 
telecommun\fcat\fons company. The equ\fpment must also be 
\fnstalled us\fng an acceptable method of connect\fon. In some 
cases, the company’s \fns\fde w\fr\fng assoc\fated w\fth a s\fngle l\fne 
\fnd\fv\fdual serv\fce may be extended by means of a cert\ffied 
connector assembly (telephone extens\fon cord). The customer 
should be aware that compl\fance w\fth the above cond\ft\fons 
may not prevent deter\forat\fon of serv\fce \fn some s\ftuat\fons.
•	Repa\frs to cert\ffied equ\fpment should be made by an 
author\fzed Canad\fan ma\fntenance fac\fl\fty des\fgnated by 
the suppl\fer. Any repa\frs or alterat\fons made by the user to 
th\fs equ\fpment, or equ\fpment malfunct\fons, may g\fve the 
telecommun\fcat\fons company cause to request the user to 
d\fsconnect the equ\fpment.
•	Users should ensure for the\fr own protect\fon that the electr\fcal 
ground connect\fons of the power ut\fl\fty, telephone l\fnes, and 
\fnternal metall\fc water p\fpe system, \ff present, are connected 
together. Th\fs precaut\fon may be part\fcularly \fmportant \fn rural 
areas.
 CAUTION 
Users should not attempt to make such connect\fons themselves, 
but should contact the appropr\fate electr\fc \fnspect\fon author\fty, 
or electr\fc\fan, as appropr\fate.
Th\fs equ\fpment compl\fes w\fth the Canad\fan ICES-003 
Class B l\fm\fts.
Utilisation au Canada
Cond\ft\fons à Rempl\fr \bréalablement à L’\fnstallat\fon d’un 
Télécop\feur Canon
A. Emplacement
\brévo\fr une table, un meuble, ou un bureau suffisamment sol\fde et 
de ta\flle appropr\fée (vo\fr le chap\ftre 11, Annexe (Append\fx), pour 
les \fnd\fcat\fons de po\fds et d\fmens\fons).
B. Installation téléphonique
1. Une seule l\fgne téléphon\fque (tonal\ftés ou \fmpuls\fons) do\ft être 
ut\fl\fsée.
2.  Il faut commander un jack modula\fre CA11A qu\f sera \fnstallé par 
la compagn\fe téléphon\fque. Sans ce jack, la m\fse en place sera\ft 
\fmposs\fble.
3.  S\f vous vous abonnez à une nouvelle l\fgne, demandez une 
l\fgne d’affa\fres normale de qual\fté téléphon\fque courante ou 
équ\fvalente. \brenez un abonnement d’une l\fgne par appare\fl.
L\fgne automat\fque \fnterurba\fne
ou
L\fgne automat\fque \fnternat\fonale (s\f vous commun\fquez avec les 
pays étrangers) Canon vous conse\flle d’ut\fl\fser une l\fgne \fnd\fv\fduelle 
conforme aux normes \fndustr\felles, à savo\fr: 
l\fgne téléphon\fque 2,500 (pour appare\fl à clav\fer) 
ou 500 (pour appare\fl à cadran/\fmpuls\fons). Il est 
également poss\fble de raccorder ce télécop\feur à 
un système téléphon\fque à pousso\frs car la plupart 
de ces systèmes émettent des s\fgnaux d’appel non 
normal\fsés ou des codes spéc\faux qu\f r\fsquent de 
perturber le fonct\fonnement du télécop\feur.
C. Condition d’alimentation
Raccordez le télécop\feur à une pr\fse de courant plus terre à tro\fs 
branches, du type s\fmple ou double, et qu\f ne sert pas à al\fmenter 
un cop\feur, un appare\fl de chauffage, un cl\fmat\fseur ou tout autre 
appare\fl électr\fque à thermostat.
L’al\fmentat\fon do\ft être de 115 volts et 15 ampères. \bour fac\fl\fter 
l’\fnstallat\fon, le jack CA11A do\ft être assez proche de la pr\fse de 
courant.
Remarques
•	Le présent matér\fel est conforme aux spéc\fficat\fons techn\fques 
appl\fcables d’Industr\fe Canada.
•	Avant d’\fnstaller cet appare\fl, l’ut\fl\fsateur do\ft s’assurer qu’\fl 
est perm\fs de le connecter à l’équ\fpement de la compagn\fe 
de télécommun\fcat\fon locale et do\ft \fnstaller cet appare\fl en 
ut\fl\fsant une méthode de connex\fon autor\fsée. Il se peut qu’\fl 
fa\flle étendre la c\frcu\fter\fe \fntér\feure de la l\fgne \fnd\fv\fduelle 
d’abonné, qu\f a été \fnstallée par la compagn\fe, au moyen d’un 
jeu de connecteurs homologués (rallonge téléphon\fque).
•	L’attent\fon de l’ut\fl\fsateur est att\frée sur le fa\ft que le respect des 
cond\ft\fons ment\fonnées c\f-dessus ne const\ftue pas une garant\fe 
contre les dégradat\fons de qual\fté du serv\fce dans certa\fnes 
c\frconstances.
•	L’\fnd\fce d’équ\fvalence de la sonner\fe (IES) sert à \fnd\fquer le 
nombre max\fmal de term\fnaux qu\f peuvent être raccordés à 
une \fnterface téléphon\fque. La term\fna\fson d’une \fnterface 
peut cons\fster en une comb\fna\fson quelconque de d\fspos\ft\ffs, 
à la seule cond\ft\fon que la somme d’\fnd\fces d’équ\fvalence de la 
sonner\fe de tous les d\fspos\ft\ffs n’excède pas 5.
  
						

							118
•	Le nombre d’équ\fvalents sonner\fe (REN) de ce produ\ft est 1,0.
•	Les réparat\fons sur un appare\fl cert\ffié do\fvent être fa\ftes 
par une soc\fété d’entret\fen canad\fenne autor\fsée par le 
Gouvernement canad\fen et dés\fgnée par le fourn\fsseur. Toute 
réparat\fon ou mod\fficat\fon que pourra\ft fa\fre l’ut\fl\fsateur de 
cet appare\fl, ou tout mauva\fs fonct\fonnement, donne à la 
compagn\fe de télécommun\fcat\fon le dro\ft de débrancher 
l’appare\fl.
•	\bour sa propre protect\fon, l’ut\fl\fsateur do\ft s’assurer que 
les pr\fses de terre de l’appare\fl d’al\fmentat\fon, les l\fgnes 
téléphon\fques et les tuyaux métall\fques \fnternes, s’\fl y en a, sont 
b\fen connectés entre eux. Cette précaut\fon est part\fcul\fèrement 
\fmportante dans les zones rurales
 CAUTION 
Au l\feu d’essayer de fa\fre ces branchements eux-mêmes, les 
ut\fl\fsateurs sont \fnv\ftés à fa\fre appel à un serv\fce d’\fnspect\fon 
fa\fsant autor\fté en mat\fère d’électr\fc\fté ou à un électr\fc\fen, selon 
le cas.Respecte les l\fm\ftes de la classe B de la NMB-003 du 
Canada.
Laser Safety
Th\fs mach\fne compl\fes w\fth 21 CFR Chapter 1 Subchapter J as 
a Class 1 laser product under the U.S. Department of Health 
and Human Serv\fces (DHHS) Rad\fat\fon \berformance Standard 
accord\fng to the Rad\fat\fon Control for Health and Safety Act of 
1968. Th\fs means that the mach\fne does not produce hazardous 
rad\fat\fon.
S\fnce rad\fat\fon em\ftted \fns\fde the mach\fne \fs completely confined 
w\fth\fn protect\fve hous\fngs and external covers, the laser beam 
cannot escape from the mach\fne dur\fng any phase of user 
operat\fon.
CDRH Regulations
The Center for Dev\fces and Rad\folog\fcal Health (CDRH) of the 
U.S. Food and Drug Adm\fn\fstrat\fon \fmplemented regulat\fons 
for laser products on August 2, 1976. These regulat\fons apply to 
laser products manufactured from August 1, 1976. Compl\fance \fs 
mandatory for products marketed \fn the Un\fted States.
 CAUTION 
Use of controls, adjustments, or performance of procedures 
other than those spec\ffied \fn th\fs manual may result \fn hazardous 
rad\fat\fon exposure.
The label \fs attached to the laser scanner mach\fne \fns\fde the
mach\fne and \fs not \fn a user access area.
 
						

							119
119
Memo
 
						

							FT6-0109   (000) XXXXXXXXXX © CANON INC.  201\f  PRINTE\b IN CHINA
CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, \fokyo 14\b-8501, Japan
CANON MARKETING JAPAN INC.1\b-\b, Konan 2-chome, Minato-ku, \fokyo 108-8011, Japan
CANON U.S.A., INC.One Canon Park, Melville, NY 11747, U.S.A.
CANON EUROPA N.V.Bovenkerkerweg 59, 1185 XB Amste\tlveen, \fhe Netherlands
CANON C\fINA CO. LTD.15F Jinbao Building\t No.89, Jinbao Street,\t Dongcheng District, Beijing 100005\t, PRC
CANON SINGAPORE PT\VE LTD1 HarbourFront Avenue, #04-01 Keppel Bay \fower, Singapore 098\b32
CANON AUSTRALIA PTY LTD1 \fhomas Holt Drive, North Ryde, Sydney NSW 2113, Australia
CANON GLO\bAL WORLDWIDE SITEShttp://www.canon.com/
Serial No. 
\bate of Purchase