Canon Canoscan Lide220 Quick Start Guide

Safety PrecautionsChoosing a location•
Do not install the machine in a location that is unstable or subject to excessive vibration.
•
Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
To avoid the risk of fire or electric shocks, use the machine under the operating environment specified
in the On-screen Manual.
•
Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the scanner...

Regulatory and Safety InformationFor models containing lithium battery•
Dispose of used batteries according to the local regulations.
•
Risk of explosion if battery is replaced by an incorrect type.
Users in the U.S.A. FCC Notice (U.S.A. Only)
For 120V, 60Hz model
Model Number: K10403
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received,...

health due to potentially hazardous substances that are generally associated with EEE. At the same time,your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste disposal
service. For more information regarding return and recycling of WEEE products, please visit...

Ready Mode. In this mode it can print again immediately if required. If the product is not used for a time,the device switches to its Power Save Mode. The devices consume less power (Watt) in these modes.
If you wish to set a longer Activation Time or would like to completely deactivate the Power Save Mode,
please consider that this device may then only switch to a lower energy level after a longer period of
time or not at all.
Canon does not recommend extending the Activation Times from the optimum ones...

Main Components
(1) document coverPresses down the placed item.
(2) scanning unit The main part of the scanner that emits light and scans items.
(3) platen Place the item to be scanned.
(4) alignment mark Align a corner of the item with this mark.
(5) scanner buttons You can scan easily according to your purpose by simply pressing a button.
25
 

PDF buttonsSCAN START button
FINISH button
AUTO SCAN button
COPY button
SEND button
(6) scanner lock switch Lock or unlock the scanning unit.
(7) stand locking slot Insert the hook of the stand when setting the scanner upright.
(8) USB connectorConnect the supplied USB cable.
Important
•
There is no power switch or power lamp on this scanner. No AC adapter or power cord is required.
When you connect a computer and the scanner with the USB cable and turn on the computer, the
scanner also turns on.
26
 

Placing Items
Place the Item on the Platen
Items You Can Place & How to Place Items
27
 

Place the Item on the PlatenPlace the item you want to scan on the platen.
Note
•
To scan by using the stand, refer to "Using the Stand ".
1.
Place the item on the platen.
1.
Open the document cover.
2.
Place the item on the platen with the side to scan facing down.
Items You Can Place & How to Place Items
Important
•
Be sure to observe the following when placing the item on the platen. The scanner may not work
correctly or the glass may break.
•
Do not place any objects weighing 4.4 lb (2 kg) or...

Using the Stand1.
Place the item on the platen.
1.
Open the document cover.
2.
Place the item with the side to scan facing the platen and align it with the alignment mark.
Items You Can Place & How to Place Items
Important
•
If you open the document cover wide, the scanner may fall over.
•
Portions placed over (A) (0.094 inch (2.4 mm) from the left edge of the platen) or  (B) (0.106 inch (2.7
mm) from the front edge) cannot be scanned.
2.
Close the document cover gently.
While scanning, hold the document...

Important
•
When scanning with the scanner positioned upright, do not subject it to vibration during operation.The correct image results may not be obtained (for example, images blur).
•
When using the scanner in the upright position, the item type may not be detected automatically.
Specify the item type and scan.
Scanning Documents
Scanning Photos
Scanning with Favorite Settings
30