Candy Go W264 D User Instructions

Instrucciones para el uso
User instructions
ES
EN
GO W 264 D
 

CAPÍTULO
CHAPTER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
3
EN
INDEXIntroduction
General points on delivery
Guarantee
Safety Measures
Technical Data
Setting up and Installation
Control Description
Table of Programmes
Selection
Detergent drawer
The Product
Washing
Drying cycle
Automatic washing/Drying
cycle
Cleaning and routine
maintenance
Faults Search
2
EN
OUR COMPLIMENTSWith the purchase of this
Candy household
appliance, you have shown
that you will not accept
compromises: you want only
the best.
Candy is...

5
EN
CHAPTER 2GU
ARANTEE
The appliance is supplied
with a guarantee certificate
which allows free use of the
T echnical Assistance Service.
4
EN
CHAPTER 1GENERAL POINTSON DELIVER
Y
On delivery, check that the
following are included with
the machine:A) INSTRUCTION MANUAL
B) CUSTOMER SERVICE ADDRESSES
C) GUARANTEE CERTIFICATES
D) CAPS
E) BEND FOR OUTLET TUBE
KEEP THEM IN A SAFE   
PLACECheck that the machine has
not incurred damage during
transport. If this is the case,
contact your nearest
Service...

7
EN
● Do not use adaptors or
multiple plugs.● This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
Children should be
supervised to ensure that
they do not play with the
appliance.● Do not pull the mains lead
or the appliance itself to
remove the plug from the
socket.●...

9
EN
CHAPTER 5SETTING UPINST
ALLA
TION
Move the machine near its
permanent position without
the packaging base.
Carefully cut the securing
strap that holds the main
cord and the drain hose.
Remove the 3 fixing screws
marked (A) and remove the
3 spacers marked (B)
Remove the screw  (C).
A spacer will fall inside the
machine.
By tilting the machine,
remove the above
mentioned spacer.
Cover the 4 holes using the
caps provided in the
instruction booklet pack.WARNING:
DO NOT LEAVE THE
PACKAGING IN THE
REACH...

11
EN
Use the 4 feet to level the
machine with the floor:
a)Turn the nut clockwise to
release the screw adjuster of
the foot.
b)  Rotate foot to raise or
lower it until it stands firmly on
the ground.
c)  Lock the foot in position
by turning the nut anti-
clockwise until it comes up
against the bottom of the
machine.
Ensure that the knob is on the
“OFF” position and the load
door is closed
Insert the plug.
ATTENTION:
should it be necessary to
replace the supply cord,
connect the wire in
accordance with...

13
A
DESCRIPTION OFCONTROL“Kg DETECTOR”
(Function active only on
Cotton and Synthetics
programmes)
Through every wash phase
“Kg DETECTOR”allows  to
monitor information on
the wash load in the drum.
So, as soon as the “Kg
DETECTOR”is set in motion, in
the first 4 minutes of the wash,
it:
- adjusts the amount of water
required
- determines the length of the
wash cycle
- controls rinsing
according to the type of
fabric selected to be washed
it:
- adjusts the rhythm of drum
rotation for the type of fabric...

15
C
“WASH TEMPERATURE” BUTTON
When a programme is
selected the relevant
indicator will light up to show
the recommended wash
temperature.
The Temperature button can
be used to decrease or
increase the temperature of
your chosen wash cycle.
Each time the button is
pressed, the new
temperature level is shown on
the Wash Temperature
Indicator.“SPIN SPEED” BUTTON
The spin cycle is very
important to remove as
much water as possible from
the laundry without
damaging the fabrics. You
can adjust the spin speed...

17
G
EN
The option buttons should be
selected before pressing the
START buttonINTENSIVE BUTTON
By pressing this button,
which can only be
activated in the Cotton
cycles, the sensors in the
new “Sensor” system  come
into operation. They affect
both the selected
temperature, keeping it at a
constant level throughout
the wash cycle, and the
mechanical function of the
drum.
The drum is made to turn at
two different speeds at
crucial moments. When the
detergent enters the
garments, the drum rotates
in such a...

19
“DELAY START” BUTTON
This button allows you to pre-
programme the wash cycle
to delay the start of the cycle
for up to 24 hours. 
To delay the start use the
following procedure:
Set the required programme.
Press the button once to
activate it (h00 appears on
the display) and then press it
again to set a 1 hour delay
(h01 appears on the display);
the pre-set delay increases
by 1 hour each time the
button is pressed, until h24
appears on the display, at
which point pressing the
button again will reset...