Candy Go F 662 Manual

Washing machine                          Instructions for use 

Introduction
Please read these instructions for use carefully and all other information enclosed with the
washing machine.
Keep all documentation in a safe place for future reference or for any future owners.
Note: this machine is solely for domestic use. 
Notes on disposal
All packaging material used is environmentally-friendly and recyclable. Please help dispose of
the packaging via environmentally-friendly means.
Your supplier or local council will be able to give you
details of current means of...

Contents Page
Introduction 2
General delivery notes 4
Safety notes 4
Quick start5
Description of controls 6
Programme Table 12
Programme selector 14
Detergent drawer  17
Detergents, washing aids and amounts to use 18
Useful advice for the user 20
The main wash 21
Cleaning and routine maintenance 23
Investigating malfunctions 25
Technical data 27
Setting up +  installation28
BEFORE SWITCHING ON THE APPLIANCE MAKE SURE
IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT
SCREWS ARE REMOVED AS SHOWN IN PAGE 28.
3 

4
General delivery notes
Please check that the following items are delivered with the appliance:
-   Instruction manual
-   Certificate of guarantee
-   Inlet hose
Check that no damage has occurred during transit, and if so, call your nearest Authorised
Technical Support Service agent.
Safety notes.
Note:
for cleaning or maintenance of the washing machine.
A) Pull out the plug
B) Turn off the tap
C) Candyequips all its appliances with earthing. Ensure that the mains supply is earthed,
and if it is not,...

M) N.B!
If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.
N)  If the appliance is not running properly or breaks down, switch it off, turn off the tap and do
not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to 
use original spare parts.
Failure to comply with the above can compromise the safety of the appliance.
O)  If the appliance’s power cable should...

6
Description of controls
Door handle A
Door Security indicator light B
Start/Pause button  C
Cold wash button D
Allergy Care button E
Delay Start button F
Spin Selection button  G
Spin speed indicator light H
Wash stage indicator lights L
Buttons indicator lights M
Programme selector with OFF position N
Detergent drawer P
A P
N
E CHG
M
D
F  L
B M 
Fig. 1 

Door handle
Press the finger-bar inside the door handle to open the door.
A
7
DOOR SECURITY indicator light 
The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.
When "Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate. 
If the door is not closed the indicator will continue to flash.
Aspecial safety device prevents the door from being opened immediately after the end of the cycle....

8
COLD WASH button  
By pressing this button it is possible to transform every programme into a cold washing one,
without modifying other characteristics (water level, times, rythmes, etc...).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely
washed thanks to this new device.
D
The option buttons should be selected before pressing
the Start/Pause button.
E“ALLERGY CARE” button 
By pressing this button you can activate a special new wash cycle in the Cotton and...

9
DELAY START button   
Appliance start time can be set with this button, delaying the start by 3, 6 or 9 hours.
Proceed as follows to set a delayed start:
Select a programme (Wait that a “Spin” indicator light will go on).
Press "Delay Start" button (each time the button is pressed the start will be delayed by 3, 6
or 9 hours respectively and the corresponding light will blink).
Press "Start/Pause" to commence the Delay Start operation (the indicator light associated
with the selected...

10
Spin speed indicator light 
When you set a program, the maximum possible spin speed will be automatically shown by
the relevant indicator light. 
Choosing a smaller spin speed by the appropriate button, the relevant indicator light will go on.
H
WASH STAGE indicator lights 
= main wash
= rinse
= spin
L
Buttons indicator light 
These light up when the relevant buttons are pressed.
If an option is selected that is not compatible with the selected programme then the light on
the button first flashes and...