CablePipeFault Advanced Locator 2250M2273M Series User Manual
Have a look at the manual CablePipeFault Advanced Locator 2250M2273M Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 57
78-8130-6150-0 Rev G 57
2. Clamp the 3M™ Dyna-Coupler around the cable or both the tip and ring of a pair.
Make sure the jaws fully close.
3. Press and hold off [T-1] to perform a battery check.
4. Press on: Ohm-meter/Fault Locate/Tone [T-2] three times to set the transmitter to
Tone mode.
− The indicator flag will light in the Digital Display [T-4] under the Tone icon.
5. Press Output Level [T-5] for high or maximum output power level.
− The indicator flag will light in the Digital Display...](http://img.usermanuals.tech/thumb/96/1612/w64_cablepipefault-advanced-locator-2250m2273m-series-1478511002_d-56.png "Page 57
78-8130-6150-0 Rev G 57
2. Clamp the 3M™ Dyna-Coupler around the cable or both the tip and ring of a pair.
Make sure the jaws fully close.
3. Press and hold off [T-1] to perform a battery check.
4. Press on: Ohm-meter/Fault Locate/Tone [T-2] three times to set the transmitter to
Tone mode.
− The indicator flag will light in the Digital Display [T-4] under the Tone icon.
5. Press Output Level [T-5] for high or maximum output power level.
− The indicator flag will light in the Digital Display...")
![Page 59
78-8130-6150-0 Rev G 59
− Press Exit [SK] to return to the Menu.
23. Product Description And Optional Accessories
A. Product Description
T= Transmitter
R=Receiver
Transmitter Output Power: 3W=3 Watt. 5W=5 Watt, 12W=12 Watt
Direct Connect Cable Clip Size: For 3 Watt and 5 Watt Transmitters only:
C= Communication Clip only; U=Utility Clip only;
For 12 Watt Transmitters only: CU=Communication and Utility Clips; W=Utility Clip only
U=US Version; E=Export Version
iD=Locates electronic markers, including...](http://img.usermanuals.tech/thumb/96/1612/w64_cablepipefault-advanced-locator-2250m2273m-series-1478511002_d-58.png "Page 59
78-8130-6150-0 Rev G 59
− Press Exit [SK] to return to the Menu.
23. Product Description And Optional Accessories
A. Product Description
T= Transmitter
R=Receiver
Transmitter Output Power: 3W=3 Watt. 5W=5 Watt, 12W=12 Watt
Direct Connect Cable Clip Size: For 3 Watt and 5 Watt Transmitters only:
C= Communication Clip only; U=Utility Clip only;
For 12 Watt Transmitters only: CU=Communication and Utility Clips; W=Utility Clip only
U=US Version; E=Export Version
iD=Locates electronic markers, including...")
![Page 64
64 78-8130-6150-0 Rev G
26. Environmental and Regulatory Specifications
Item Specification
Standard IP54
Regulatory FCC compliant, FCC Part 15
Operating Temperature -4°F to 122°F (-20°C to 50°C)
Storage Temperature -4°F to 158° F (-20°C to 70°C)
27. Rechargeable Battery Information
UN2800 classification as “Batteries, wet, Non-Spillable, and electric storage”
as a result of passing the Vibration and Pressure Differential Test described in
DOT [49 CFR 173.159(d) and IATA/ICAO [Special Provision A67].
!...](http://img.usermanuals.tech/thumb/96/1612/w64_cablepipefault-advanced-locator-2250m2273m-series-1478511002_d-63.png "Page 64
64 78-8130-6150-0 Rev G
26. Environmental and Regulatory Specifications
Item Specification
Standard IP54
Regulatory FCC compliant, FCC Part 15
Operating Temperature -4°F to 122°F (-20°C to 50°C)
Storage Temperature -4°F to 158° F (-20°C to 70°C)
27. Rechargeable Battery Information
UN2800 classification as “Batteries, wet, Non-Spillable, and electric storage”
as a result of passing the Vibration and Pressure Differential Test described in
DOT [49 CFR 173.159(d) and IATA/ICAO [Special Provision A67].
!...")
![Page 66
Important Notice
All statements, technical information and recommendations related to 3M Products are ba\
sed on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using the 3M Product, you
must evaluate it and determine if it is suitable for your intended appli\
cation. Because conditions of Product
use are outside of our control and vary widely you assume all risks and liability associated with such use. Any
Product-related statements not contained in...](http://img.usermanuals.tech/thumb/96/1612/w64_cablepipefault-advanced-locator-2250m2273m-series-1478511002_d-65.png "Page 66
Important Notice
All statements, technical information and recommendations related to 3M Products are ba\
sed on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using the 3M Product, you
must evaluate it and determine if it is suitable for your intended appli\
cation. Because conditions of Product
use are outside of our control and vary widely you assume all risks and liability associated with such use. Any
Product-related statements not contained in...")
78-8130-6150-0 Rev G 61 24. Receiver Specifications Item Specification Modes Directional Peak Directional Null Special Peak Induction Peak Frequency Response: Active 577 Hz 8 kHz 33 kHz 200 kHz Passive 31.5 kHz (CATV) 9 – 30 kHz (LF) Power 50 Hz, 5th and 9th harmonic of 50 Hz 60 Hz, 5th and 9th harmonic of 60 Hz (100 / 120 Hz) rectified power Auxiliary 333 Hz 512 Hz 560 Hz User Defined Frequencies Four Display LCD Gain Control Manual and Automatic Weight w/batteries 4–5 lbs. (1.8–2.3 kg) (model dependent) Battery Qty. and size 8 AA (LR6) Battery Life 30 hours average Depth Accuracy ±2% ± 2 in. (5 cm) for 0–60 in. (0-1.5 m) ±6% ± 2 in. (5 cm) for 60–120 in. (1.5–3.0 m) ±10% ± 2 in. (5 cm) for 120–180 in. (3.0 m–4.5 m) Depth Range 0–360 in. (0–914 cm) Marker depth accuracy ± 15% ± 2 in. (5 cm) Maximum Program Range 3M ™ iD Markers Near-Surface Ball Marker Full-Range 6 in (15 cm) 12 in (30 cm) 24 in (61 cm)
62 78-8130-6150-0 Rev G ItemSpecification Read Range 3M ™ iD Markers Near-Surface Ball Marker Full-Range 3 ft (0.9 m) 5 ft (1.5 m) 8 ft (2.4 m) Detection Depth 3M Non-iD (Passive) Markers Near Surface Ball Marker Mid-Range Full-Range 2 ft (0.6 m) 5 ft (1.5 m) 6 ft (1.8 m) 8 ft (2.4 m)
78-8130-6150-0 Rev G 63 25. Transmitter Specifications Item Specification Trace Mode 577 Hz 8 kHz 33 kHz 200 kHz Fault Mode (2273M models only) 10/20 Hz - Fault signal 577 Hz / 33 kHz -Trace signal Note: The fault locating limit is 2.0MΩ although the transmitter's ohmmeter mode can display a fault resistance up to 10MΩ . Tone Mode 577 Hz and 200 kHz pulsing at 8 Hz Induction Mode 8 kHz (only available on 12 Watt Transmitter) 33 kHz 200 kHz Output Power (in Direct Connect mode) 3 Watt Transmitter Model Normal setting: 0.5 W High setting: 3 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz 5 Watt Transmitter Model Normal setting: 0.5 W High setting: 3 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz Maximum setting: 5 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz (with external DC power source) 12 Watt Transmitter Model Normal setting: 0.5 W High setting: 3 W @ 577 Hz, 8 kHz, 33 kHz; 1 W @ 200 kHz Maximum setting: 12 W @ 577 Hz, 8 kHz; 10 W @ 33 kHz; 1 W @ 200 kHz (with external DC power source) Output Voltage (Maximum) 70 Vrms Output Protection 240 Vrms Weight w/batteries w/ alkaline batteries only: 5.2 lbs (2.4 kg) w/ rechargeable battery (2200RB) and alkaline batteries (5W and 12W transmitters only): 9.2 lbs (4.2 kg) Battery Qty. and size For Normal and High Output Power: 6 "C" size, Alkaline (LR14) For Maximum Output Power: Rechargeable Battery (2200RB), 12V-6AH, Sealed Maintenance-Free Lead (Pb)-Acid Battery (See safety information below.) Battery Life Normal Output Power level: 50 hours typical High Output Power level: 10 hours typical Typical transmitter specified battery life (listed above) is increased by 40% when using the 2200RB Rechargeable Battery (12 volt). Using the 2200RB bypasses the alkaline batteries. Maximum Output Power level: 4 hours typical (Maximum Output Power level achieved using 2200RB Rechargeable Battery.) External DC Power 9–18 V DC Rechargeable Battery fuse 5 Amp / 32 Volt Littelfuse MINI ® Blade # 0297005 Cigarette Lighter Adapter Cable fuse 4 Amp / Fast Blow 250V
64 78-8130-6150-0 Rev G 26. Environmental and Regulatory Specifications Item Specification Standard IP54 Regulatory FCC compliant, FCC Part 15 Operating Temperature -4°F to 122°F (-20°C to 50°C) Storage Temperature -4°F to 158° F (-20°C to 70°C) 27. Rechargeable Battery Information UN2800 classification as “Batteries, wet, Non-Spillable, and electric storage” as a result of passing the Vibration and Pressure Differential Test described in DOT [49 CFR 173.159(d) and IATA/ICAO [Special Provision A67]. ! CAUTION To reduce the risks associated with environmental contamination and possi\ ble injury: The 12W transmitter utilizes the 2200RB rechargeable battery for the Maximum Output Power level. This is a maintenance-free sealed lead (Pb)-acid battery. • Replace the battery if the acid solution leaks. • The batteries are not serviceable. • Do not disassemble batteries. • Do not remove vent caps. • Do not rest tools or cables on batteries. • Store lead-acid batteries with adequate ventilation. • Do not heat batteries above 140°F (60°C) • Never recharge batteries in an unventilated, enclosed space. • Spent batteries must be treated as hazardous waste. Dispose of batteries and electronic components in accordance with all regulations. • Do not incinerate batteries. • Always remove/disconnect batteries when not in use or storing for long periods of time.
Important Notice All statements, technical information and recommendations related to 3M Products are ba\ sed on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using the 3M Product, you must evaluate it and determine if it is suitable for your intended appli\ cation. Because conditions of Product use are outside of our control and vary widely you assume all risks and liability associated with such use. Any Product-related statements not contained in current 3M publications, or any contrary statements contained in your purchase order, shall have no force or effect unless expressly agreed to in writing by \ an authorized officer of 3M. Limited Product Warranty 3M Locators (except accessories), will conform to 3M's published specifications and will be free from def\ ects in material and manufacture for a period of twelve (12) months from th\ e date of purchase. Dry cell batteries included in any of 3M's products are warranted only to the extent the ba\ ttery manufacturer determines such batteries are covered by its warranty. Locating accessories are warranted for ninety (90) days after purchas\ e. 3M's obligations and liability under this warranty are limited to repair\ ing, replacing or refund of the purchase price, at 3M's option, any of 3M's products which, after normal and proper usage, are determined by 3M to be defective. This warranty does not extend to any of 3M's products which have been su\ bjected to misuse, neglect, accident or improper applications, nor shall it extend to products which have been repaired or substantial\ ly altered outside 3M's manufacturing or repair facility, nor to any associated instruments, equipment or apparatus. Before utilizing any of 3M's products, BUYER should determine the suitability of the product for BUYER'S intended use. 3M MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no case shall 3M be liable for any special, or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory. This limitation does not apply to claims for personal injury. Special Condition: Shipments into authorized distributor/supplier locations will have an a\ dditional ninety (90) day warranty period. 3 Electrical Markets Division6801 River Place Blvd. Austin, TX 78726-9000 1-800-200-0265 FAX: 1-877-601-1305 www.3M.com/dynatel Please Recycle. Printed in USA. © 3M 2014. All Rights Reserved. 78-8130-6150-0 Rev G This is the EU symbol f or equipment that is covered under the W aste from Electr ical and Electronic Equipment (WEEE) directiv e per CENELEC Specification 5041. It indicates that cert ain products should not be discarded in the trash, but rather should be recycled. This applies to all electronic pluggab le and batter y powered product s.This is the EU symbol for equipment that is covered under the Waste from Electrical and Electronic Equipment (WEEE) directive per CENELEC \ Specification 5041. It indicates that certain products should not be discarded in the trash, but rather should be recycled. This applies to all electronic pluggable and battery powered products. 3M and Dynatel are trademarks of 3M Company. ArcPad is trademark of Environmental Systems Research Institute, Inc. (\ ERSI). MINI and Littlefuse are trademarks of Littlefuse, Inc.