Brother Quattro 3 User Manual
Here you can view all the pages of manual Brother Quattro 3 User Manual. The Brother manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.
Page 361
ERROR MESSAGES 359 Appendix 9 This message is displayed when the machine is retrieving a previously saved pattern while in embroidery edit mode. This message is displayed when, after selecting a pattern, , , or is pressed and the pattern is about to be deleted. This message is displayed when the bobbin is being wound, and the motor locks because the thread is tangled, etc. This message is displayed when there is a possibility that the data for the selected pattern is corrupted. This...
Page 362
ERROR MESSAGES 360 This message is displayed when you attempt to select a pattern after the USB media in which the pattern is saved has been changed. This message is displayed when an error occurs with the USB media. This message is displayed while the USB media is transmitting. This message is displayed when the memory is full and a pattern must be deleted. This message is displayed when a button, such as the “Start/Stop” button, is pushed while the presser foot is raised.This message is...
Page 363
ERROR MESSAGES 361 Appendix 9 ■Alarm Sounds If the operation was performed incorrectly, an alarm sounds to indicate that an error occurred. If the operation was performed correctly, the machine beeps to confirm the operation. This message appears if the file format is incompatible with this machine. Check the list of compatible file formats. (see page 40.) This message is displayed when the image is deleted. This message is displayed when you press in the screen other than the Utility...
Page 364
SPECIFICATIONS 362 SPECIFICATIONS * Please be aware that some specifications may change without notice. ItemSpecification Sewing Machine (Box 1 of 3) Dimensions of machine Approx. 61.5 cm (W) × 33.2 cm (H) × 27.0 cm (D) (approx. 24-7/32 inches (W) × 13-5/64 inches (H) × 10-5/8 inches (D)) Dimensions of box Approx. 68.5 cm (W) × 47.0 cm (H) × 39.0 cm (D) (approx. 26-31/32 inches (W) × 18-1/2 inches (H) × 15-11/32 inches (D)) Weight of machine Approx. 15 kg (approx. 33 lb) Weight of box (for...
Page 365
UPGRADING YOUR MACHINE’S SOFTWARE 363 Appendix 9 UPGRADING YOUR MACHINE’S SOFTWARE You can use USB media or a computer to upgrade software for your sewing machine. When an upgrade program is available on “ http://solutions.brother.com ”, please download the files following the instructions on the website and steps below. Upgrade Procedure Using USB Media aWhile pressing the “Automatic Threading” button, turn the main power to ON. →The following screen will appear on the LCD. bPress . cInsert the USB...
Page 366
UPGRADING YOUR MACHINE’S SOFTWARE 364 Upgrade Procedure Using Computer aWhile pressing the “Automatic Threading” button, turn the main power to ON. →The following screen will appear on the LCD. bPress . cPlug the USB cable connector into the corresponding USB ports for the computer and for the machine. →“Removable Disk” will appear in “Computer (My computer)”. dCopy the upgrade file to “Removable Disk”. →The following message will appear. eWhen the message disappears, press . →The upgrade file is...
Page 367
STITCH SETTING CHART 365 STITCH SETTING CHART The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch widths, and whether or not the twin needle mode can be used. Note Quilting foot “C” is used when the straight stitch needle plate is attached to the machine. Refer to “Using Free motion Quilting Foot “C”” on page 116. StitchStitch name Presser foot Applications Stitch width [mm (inch)]Stitch length [mm (inch)] Tw in needle...
Page 368
STITCH SETTING CHART 366 2 steps elastic zigzagOvercasting (medium weight and stretch fabrics), tape and elastic5.0 (3/16) 1.5 - 7.0 (1/16 - 1/4) 1.0 (1/16) 0.2 - 4.0 (1/64 - 1/16) OK ( J ) 3 steps elastic zigzag Overcasting (medium, heavyweight and stretch fabrics), tape and elastic5.0 (3/16) 1.5 - 7.0 (1/16 - 1/4) 1.0 (1/16) 0.2 - 4.0 (1/64 - 1/16) OK ( J ) Overcasting stitch Reinforcing of light and medium weight fabrics 3.5 (1/8) 2.5 - 5.0 (3/32 - 3/16) 2.0 (1/16) 1.0 - 4.0 (1/16 - 3/16) NO...
Page 369
STITCH SETTING CHART 367 Piecing stitch (Left)Piecework/patchwork 6.5 mm (approx. 1/4 inch) left seam allowance1.5 (1/16) 0.0 - 7.0 (0 - 1/4) 2.0 (1/16) 0.2 - 5.0 (1/64 - 3/16) NO Hand-look quilting Quilting stitch made to look like hand quilting stitch 0.0 (0) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 1.0 - 4.0 (1/16 - 3/16) NO Quilting appliqué zigzag stitch Zigzag stitch for quilting and sewing on appliqué quilt pieces 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 1.4 (1/16) 0.0 - 4.0 (0 - 3/16) NO Quilting appliqué...
Page 370
STITCH SETTING CHART 368 Ladder stitchDecorative stitching 4.0 (3/16) 0.0 - 7.0 (0 - 1/4) 3.0 (1/8) 2.0 - 4.0 (1/16 - 3/16) NO Rick-rack stitch Decorative top stitching 4.0 (3/16) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 1.0 - 4.0 (1/16 - 3/16) OK ( J ) Decorative stitch Decorative stitching 1.0 (1/16) 1.0 - 3.0 (1/16 - 1/8) 2.5 (3/32) 1.0 - 4.0 (1/16 - 3/16) OK ( J ) Decorative stitch Decorative stitching 5.5 (7/32) 0.0 - 7.0 (0 - 1/4) 1.6 (1/16) 1.0 - 4.0 (1/16 - 3/16) OK ( J ) Serpentine stitch Decorative...