Brother Pocketjet 6 Instruction Manual

PJ-600 Series Utility
37
3
PJ-600 Series Utility Menu3
 
1 Select All
Click [Select All] to select all of the check 
boxes in PJ-600 Series Utility.
2 Clear All
Click [Clear All] to clear all of the check boxes 
in PJ-600 Series Utility.
3 Current
Click [Current] to retrieve the current settings 
from the printer selected in the [Printer] 
pull-down menu.
4 Bluetooth Settings (PJ-662/663 only)
Click [Bluetooth Settings] to open the 
Bluetooth settings dialog box, which allows you 
to name the printer,...

Chapter 3
38
„Clean Unit
See Cleaning the Platen Roller on page 40.
„Print Unit Settings
Click [Print Unit Settings] to print a report 
containing firmware version, image quality, 
and configuration information, as shown 
below.
 
You can also print this report using the 
(Feed) button (see Printing a Printer 
Report on page 46).
„Auto Paper Sensor Threshold 
Adjustment
Click [Auto Paper Sensor Threshold 
Adjustment] and follow the on-screen 
instructions to adjust the paper detection 
sensor...

39
4
4
JPEG Printing4
When using an IrDA connection or 
a Bluetooth connection (PJ-662/663 only), 
image data (JPEG) can be printed without 
using the printer driver.
Note
• The IrOBEX protocol is used for printing 
via an IrDA connection.
• The Bluetooth Basic Imaging Profile (BIP) 
is used for printing via a Bluetooth 
connection.
• This printer will convert a color JPEG 
image to a ‘Black & White’ image using a 
dithering process.
• When sending a JPEG image that is 
already ‘Black & White’ this...

40
5
Cleaning the Platen 
Roller
5
Dirt and debris on the platen roller can cause 
the roller to feed paper into the printer at an 
angle and degrade the quality of the printed 
image.
aMake sure that the printer is turned on 
and that no paper is loaded.
Note
If paper is loaded when you attempt to 
clean the platen roller, a form feed will be 
executed and the paper will be ejected.
 
bInsert the cleaning sheet into the paper 
input slot. The text “CLEANING SHEET” 
should be upright and face the front...

Maintaining the Printer
41
5
Cleaning the Printer’s 
Exterior
5
Clean the exterior of the printer by wiping it 
with a dry cloth.
Note
• Do not wet the cloth or allow water to enter 
the printer.
• Do not use benzene, alcohol, paint 
thinner, or cleaners that are abrasive, 
alkaline, or acidic. Such cleaners may 
damage the printer’s case.
  

42
6
Indicators6
The indicators light and flash to indicate the printer’s status. The following symbols are used in 
this section to explain the meaning of the different indicator colors and patterns.
Reference6
 or   or Indicator is lit in the color shown
 or   or Indicator is blinking in the color shown
 or Indicator is blinking in alternating colors as shown
Indicator is lit or blinking in any color or pattern
Indicator is off
POWERDATASTATUS (Bluetooth)1Description
AC adapter/DC cable/Rechargeable...

Reference
43
6
1PJ-662/663 only
 / Receiving flash upgrade
 / Printer Receiving upgrade
 / Printer is in service mode (for printing a 
printer report)
System error (call for service)
No rechargeable Ni-MH battery found when 
charging
Time-out when charging the rechargeable 
Ni-MH battery
 /   Head or motor is cooling down
 / Data reception error
 / Buffer full or format error
 / Printer is in boot mode
Ready for Bluetooth communication
POWERDATASTATUS (Bluetooth)1Description 

Chapter 6
44
Indicator Warnings6
ProblemSolution
The POWER indicator does not light The printer is receiving no power.
If you are using AC or DC power, make sure that the AC 
adapter or DC cable is properly connected (see Connecting the 
Printer to External Power on page 1) and make sure that the 
AC or DC power outlet is turned on.
If you are using DC power, check the fuse.
No rechargeable Ni-MH battery found 
when chargingThe printer did not detect a rechargeable Ni-MH battery when 
you tried to charge...

Reference
45
6
Head or motor is cooling down The thermal head or motor is too hot.
Head: 
If the thermal head becomes even hotter, the thermal head may 
produce imaging on the paper in areas not intended to be 
printed. This condition is normal when printing documents with 
a great deal of “black” content.
The printer will stop and resume printing after the print head 
has cooled down.
To avoid or delay the onset of this condition, print using a lighter 
density setting, reduce the amount of black space...

Chapter 6
46
Printing a Printer 
Report
6
This feature is used to print a letter-size 
printer settings report without connecting the 
printer to a computer. The report contains 
firmware version, image quality, and 
configuration information.
aMake sure that the printer is turned on 
and that no paper is loaded.
bPress and hold the  (Feed) button for 
two or more seconds until the DATA 
indicator turns red.
cInsert a piece of genuine Brother 
thermal paper into the printer’s paper 
input slot. The...