Brother Pocketjet 6 Instruction Manual

PJ-600 Series Utility
27
3
Uninstalling PJ-600 
Series Utility
3
For Windows® Users3
aWindows® XP:
[start] - [Control Panel] - [Add or 
Remove Programs]. The [Add or 
Remove Programs] window displayed.
Windows Vista
® / Windows® 7:
Start button - [Control Panel] - 
[Programs] - [Programs and 
Features]. The [Uninstall or change a 
program] window displayed.
bWindows® XP:
Choose [Brother PJ-600 Series 
Utility], and click [Remove].
Windows Vista
® / Windows® 7:
Choose [Brother PJ-600 Series 
Utility], and...

Chapter 3
28
The main window (shown below) opens, and 
the printer’s default settings are displayed.
 
Settings shown here vary by country and may 
have been specially configured for some 
customers.
How to Use PJ-600 Series 
Utility3
aIn the main window of the PJ-600 Series 
Utility, select the check boxes of the 
parameters with settings that can be 
changed.
bSelect the desired settings from the 
pull-down menus or enter the desired 
values.
cClick [Send Settings] to save the 
settings in the...

PJ-600 Series Utility
29
3
Parameters3
Note
• Most users will not need to change these settings; generally they are relevant only when 
printing simple text data from a computer that does not have this printers driver installed.
• The parameters which are common to all operating systems include Auto Power On, Auto 
Power Off and Pre-feed.
 
Changing Parameter Settings3
 
1Printer
Displays a list of the compatible printers that 
are connected to the computer. When using 
PJ-600 Series Utility to change...

Chapter 3
30
Defining Paper Size3
 
1 Paper Size
Available settings: [Letter], [A4], [Legal], 
[Custom]
Default setting: [Letter]
This parameter determines the default paper 
size. For standard paper sizes, this parameter 
also determines the default margins and the 
length for each printed page, as shown below.
 
(All measurements are in inches (mm))
When [Custom] is selected, the following 
parameters determine the page specifications.
[Form Length]
[Bottom Margin]
[Left Margin]
[Right Margin]
Note
If...

PJ-600 Series Utility
31
3
The height of the bottom margin is expressed 
in lines of text. For example, if [Bottom 
Margin] is set to 6 lines, and if [Text Line 
Spacing] is set to 6 lines per inch, the actual 
height of the bottom margin is 1 inch 
(25.4 mm).
Note that the minimum height of the bottom 
margin must be at least 0.5 inches (12.7 mm). 
For example, if [Text Line Spacing] is set to 6 
lines per inch, [Bottom Margin] must be set to 
at least 3 lines.
The maximum setting is the number of lines...

Chapter 3
32
Defining Power and Roll Paper Options3
 
1 Auto Power On
Available settings: [Disable], [Enable], 
[Enable (No Main Button)]
Default setting: [Disable]
This parameter determines how the printer 
responds when it is connected to an AC or DC 
power outlet.
„Disable - The printer enters sleep mode, 
using minimal power. To turn on the printer, 
press the  (Power) button.
„Enable - The printer turns on automatically. 
This is useful in situations where the 
(Power) button is difficult to...

PJ-600 Series Utility
33
3
This parameter is used to print dash lines 
between pages, useful when printing on roll 
paper. When [Enable] is selected, set [Form 
Feed Mode] to [Fixed Page]. Note that dash 
lines are printed on the paper; they are not 
punched in the paper.
Note
If this parameter is changed in the printer 
driver’s dialog box, that setting has priority.
  

Chapter 3
34
Defining Print Density and Other Options3
 
1 Print Density
Available settings: [0]-[10]
Default setting: [6] (PJ-623/663), [4] (PJ-
622/662)
This parameter determines print density, which 
affects the darkness of the printed document. A 
lower value produces lighter print; a higher 
value produces darker print.
Darker print uses more battery power, but may 
be easier to read if the font or other document 
content is made up of narrow lines. If battery 
conservation is important, select a...

PJ-600 Series Utility
35
3
When the device sends data to the printer, it 
may send both an LF and a CR command at 
the end of a line in order to move the print head 
to the left margin (via the CR command) of the 
next line (via the LF command). However, 
some devices send only one command, and in 
these cases, the printer must respond as if 
both commands were sent. If your device 
sends only LF or CR commands at the ends of 
lines, select [LF=CR+LF CR=CR+LF].
5 Paper Sensor Threshold
Available...

Chapter 3
36
Defining Internal Font Settings3
 
1 Extended Characters
Available settings: [Italic], [Graphics]
Default setting: [Graphics]
This parameter determines which characters 
are used when printing ASCII characters 128 
to 255. When [Italic] is selected, italic versions 
of ASCII characters 32 to 127 are used. When 
[Graphics] is selected, the characters shown 
in the table on page 55 are used.
2Character Set Map
Available settings: [USA], [France], 
[Germany], [United Kingdom], [Denmark I],...